Used Saws in Greater Poland, Poland

Casolin Astra panel saw

• Manufacturer: Casolin

Casolin Astra panel saw Cart 300cm, Set saw, Upper-lower and 0-45 degree tilt adjustment, Cutting width on the right side 110cm, Motor 4kW, Set saw 0.55kW 3 speeds of cutting.

Panhnas 690 type 320cm sliding table saw

Panhans sliding table saw, 320 cm carriage on bars, hydraulic up-down and angle adjustment of the saw blade, 5.5 kW main motor, separate scoring unit, 3 cutting speeds, maximum blade size 400 mm, machine in good ...

Panel Saw Holzmann FKS 315VFN – 3200

• Manufacturer: Holzmann

Panel saw Holzmann FKS 315VFN – 3200 carriage 320 cm, blade height adjustment up-down and angle manually, main motor 5.5 kW, downshooter on a separate motor, 2 cutting speeds, max blade 315 mm, Diameter of the do...

Robland PS 3200 silver line sliding table saw

• Manufacturer: Robland

Cart: 320cm | Main engine: 7KW | Rotation speed: 3 | Maximum shield size: 450mm | Slope: 0-45, electrically adjustable with readout | Up-and-down saw: electrically adjustable, no reading | Culaga on the right si...

Scheppach circular saw with trolley

• Manufacturer: Scheppach

Scheppach circular saw with trolley Model ts2500 Engine 2.9KW 380V Angle device Arm length along which the trolley travels 200cm Cutting width from the right side 40cm Max blade 250mm Condition good

Kamro sliding table saw

Kamro Sliding Table Saw 150cm carriage, 5.5kW main motor, 2 cutting speeds, 400 blades maximum, manual up-down blade adjustment, 90cm cutting width on the right side, and fully functional.

Stenner resaw band saw

• Manufacturer: Stenner

Engine: 11KW | Wheel width: 900mm | Cutting band width: 75mm | Cutting height adjustment: manual | Cutting width adjustment: manual

Tornado sliding table saw

Main engine: 5.5KW | Rotation speed: 3000, 4000, 5000 | Maximum shield: 400mm | Undercutter: 0.75KW, 120mm | Cart: 320cm | Culaga on the right side: manually adjustable up to 1300mm | Slope: 0-45, manually adjus...

APS KS-160 crosscut saw

APS KS-160 Crosscut Saw Cutting width: 450mm Maximum cutting height: 160mm with a material width of approximately 180mm Blade diameter: 550mm Motor: approximately 5.5kW, 380V Material pressure: Pneumatic blade he...

Rema 150cm sliding table saw

• Manufacturer: Rema

Rema sliding table saw, 150cm carriage, manually adjustable saw blade up and down, 6kW main motor, can be tested before purchase.

Griggio 940 Band Saw

• Manufacturer: Griggio

Griggio Bandsaw wheel width 940mm motor 5.5KW, power supply 380V tilting table at an angle blade dimensions min.6590 – max.6710 machine dimensions h-286cm, w-160cm, l-100cm (possibility of transporting the machin...

EMCO EBS 400 band saw

• Manufacturer: Emco

Engine: 1,1KW | Upper wheel: 40cm | Lower wheel: 40cm | Tape: 320cm

Kamro 260cm inclined format saw

Technical data; Does it have a cutter: Yes | The length of the trolley: 260 cm | Up-down adjustment: Yes, manually | Tilt adjustment: Yes, manually | Engine size: 5,5 KW | Power: 380 V

SCM nova si40 sliding table saw

• Manufacturer: SCM / SCMI

SCM Nova Si40 Sliding Table Saw 320cm carriage, 7kW main motor, 0.75kW scoring unit, Right-side motorized culage up to 1226mm, 2 speeds: 3500 and 5000 rpm, Digital readout on the carriage, Used machine, very good...

Cross-cut Saw Felder kappa 400 format 4

• Manufacturer: Felder

Cross-cut Saw Felder kappa 400 format 4 carriage 320cm, tilting and up-down saw blade electrically adjustable culage on the right side manually adjustable up to 1250mm, kerf 1.1KW, main motor 7.3KW, 3 cutting spe...