Used Sanders in France

3 DMC Ginning Sander

• Manufacturer: DMC

equipped with : 1 initial sanding calibration unit with 1 rubber roller 1 ramp of thickness detectors across the full width of the wide belt sander, This finishing sander is equipped with a segmented electronic ...

SANDING/THINNING PROFILE SANDER

• Manufacturer: ECOLINE WOOD TECHNOLOGY

Frames made of steel to guarantee rigidity and stability during work. Rectified frames to guarantee perfect flatness of the work surfaces. All unit movements are carried out on linear guides with recirculating ba...

LONG BELT SANDER 2500 - MABO SPECIAL

Table width 2500 mm For sanding belts 120-150 x 6800mm G80-220 Electric table raising and lowering Gooseneck frame 2.2kw (3hp) motor Suction Ø120mm 0mm Lot offered for export, without warranty Prices ex warehouse...

LONG BELT SANDER 2500 - MABO / ADLER

• Manufacturer: Adler

Brand: ADLER / MABO Serial number: 075/4 Year: 1982 - 3 three-phase motors 380V : - Complete integrated suction device: bagging machine Ø 500mm

3M LONG BELT SANDER - SAMCO LL T

• Manufacturer: Samco

Brand : Samco Type : 3000 LL T Serial No. : ND 89 Year : 1986 - Balanced sanding pad with graphite belt. Complete machine, offered as is.

LONG BELT SANDER 3000 MM - BINI L75

• Manufacturer: Bini

- Double gooseneck frame - 4 HP 380 three-phase main motor - Electric table height adjustment - 0.37 kW suction motor - Motorized lifting and lowering - Retractable top cover Offered as is Batch offered for expor...

Edge sander - HOLZMANN KOS 2740 C

• Manufacturer: Holzmann

2 belt sander lower width: 2 meters Heesemann

• Manufacturer: Heesemann

Lower wide belt sander equipped with : 2 longitudinal belts with CSD pad

Long belt sander 2500 or 3000 mm - MINIMAX LS

• Manufacturer: SCM / SCMI

Length of the machining table 3000 mm, development 8100 mm 2-speed S1 3.3 / 4.5kW (4.5/6Hp) 2-speed S1 motor 1-speed motor S1 4kW (5.5CV) 50Hz

LONG BELT SANDER SAMCO TYPE F 2500 5.5HP

• Manufacturer: Samco

- Star-delta switch with 2 directions of rotation - Belt width: 150mm / Belt max length: 7m - Pulleys: Ø250mm Width: 162mm - Balanced sanding platen with graphite belt. Complete machine.

CALIBRATION SANDER 3 WIDE BELTS MM - SCM SANDYA CLK3G

• Manufacturer: SCM / SCMI
• Model: Sandya

- Height (thickness) 3 to 160 mm - Maximum workpiece width 1100 mm - Minimum workpiece length 390 mm - Abrasive belt speed 18m/s - Conveyor belt feed speed 4.5 - 9 m/min - Belt dimensions suitable 2150 x 1115 mm ...

Wide belt sander 1 belt 950 mm - DMC SD 10

• Manufacturer: Scm

Wide belt sander 1 or 2 belts 950 or 1100 mm - DMC SD 30

• Manufacturer: Scm

Wide belt sander 2 belts 1350 mm - DMC SD 70-M2

• Manufacturer: Scm

Steel structure with electrical cabinet positioned on the front of the machine Introduction of the sanding belts on the left side of the machine Motorized adjustment of the machining table Main motor positioned i...

Wide belt sander 3 belts 1350 mm - DMC SD 90-M3

• Manufacturer: Scm

Steel structure with electrical cabinet positioned on the front of the machine Introduction of the sanding belts on the left side of the machine Motorized adjustment of the machining table Main motor positioned i...

SCM / SCMI Sandya Sander

• Manufacturer: SCM / SCMI
• Model: Sandya

Good condition SCM / SCMI Sandya Sanders available between 1997 and 2011 years. Located in Portugal and other countries. Click request price for more information.