Used Filter Presses

Seitz-Werke 'Orion' model 60/100 plate and frame filter

• Manufacturer: Seitz

Seitz-Werke 'Orion' model 60/100 plate and frame filter, set up with (39) 60cm plates with one crossover plate, 2" threaded ports with 1" threaded discharge fittings with check valves, with gauges, on caters, man...

1998 Plate & Frame Filter | LR2

• Manufacturer: Cadalpa

Cadalpa 40-plate filter housing in good condition. Replacement gaskets available.

Durco EP-G800/32-16 Filter Press

• Manufacturer: Durco

100 psi. 16 polypropylene plates. 1¼ in. thick. 30 in. x 30 in. (approx.). 200 ft² surface area (approx.). Plus, head plate and tail plate. 8.5 ft³ cake capacity. Hydraulic cylinder closing ram. Can dewater slurr...

M.W Water Mark Plate Filter Press

Recessed Plates J Press Handle with Close/Stop/Open Position

11.5 Cubic meter Membrane Filter Press for Sale

11.5 cubic meter membrane filter press. New and unused. 110 plates made with 100 percent virgin polypropylene. Dual feed and dual cylinder. Max feed pressure of 300 PSI. Unit can cycle up to four times per hour. ...

Filter, P&F, 12" Dia., Brass, Ertel, #Z377150

• Manufacturer: Ertel

Ertel Filter Press, Brass Construction - 12" diameter, with five plates (5/16" thick) and two frames (1" thick). Features two-eye delivery and manual screw closure. Mounted on base with casters.

Filter, P&F, 48" X 48", PPL, Shriver, #S374342

• Manufacturer: Shriver

Shriver recessed plate filter press with (20) 48" x 48", 3" thick polypropylene chambers, 5/8" deep recess. 3" diameter corner eyes, 5" diameter center feed. Unit is complete with Vickers hydraulic pump with rese...

Filter, P&F, 10", 316 S/st, Sartorius, Ultrafiltration, #S736200

• Manufacturer: Sartorius / Essen / Intellicyt

316 stainless steel filter, Plate & Frame, 10", 316 stainless steel, sartorius, ultrafiltration. Sartorius plate & frame filter, 10" diameter frames, 1" thick, all 316 stainless steel contacts. Frames include (10...

Filter, P&F, 16" x 15", PPL, Enerpac, 28 Plates #S743489

• Manufacturer: Enerpac

Enerpac Plate and Frame Filter Press - Features 28 polypropylene plates measuring 16" x 15", mounted on a caster-supported frame. Includes a 2" center feed for high-efficiency liquid and solid separation.

Filter, P&F, 30" X 30", PPL, Ontrac, 28 Plates, Recessed, #S732960

• Manufacturer: Ontrac

Plate & frame filter press, rated for approximately 175 sq. flat top. of surface area, approximately 7 cu. flat top. of cake capacity, complete with (28) 30" x 30" x 2-1/2" thick polypropylene plates, 1/4" recess...

Filter, P&F, 4" X 4", PPL, 5 Plates, 120 CI #S741570

• Manufacturer: Star Systems

Plate and Frame filter press, manufactured by Star Systems, model number FC10-6S, approximately 120-cubic inch capacity. Unit includes five (5) polypropylene plates measuring 4" X 4" X 1.5" deep with six (6) addi...

Filter, P&F, 48" X 48", PPL, 36 Plates, Shriver, Recessed, (3) #C730788

• Manufacturer: Shriver

(3) Plate & frame filter press, manufactured by Shriver, 48" x 48" recessed plates, polypropylene construction, approximately (36) plates, 6" diameter center eye feed, hydraulic closure complete with (2) hydrauli...

Plate & Frame Filter | KA1

• Manufacturer: Criveller

40 plate filter housing. No crossover plate. Sturdy construction. Always indoors.