Used Processing in Gauteng, South Africa

Curing Cabinet (UTCM-1100)

Strength Tests Product Code: Description: The UTCM-1100 Curing Cabinet is used for curing of cement, concrete or other cement-based mortar specimens. The curing cabinet provides (20 ± 1) °C temperature and over 9...

Test Jigs for Compression and Flexure (UTCM-4200A)

Compression and Flexural Machines Product Code: Due to the continuous development of our products, the goods supplied may vary in detail to that illustrated on this Website.

Tensile Adhesion Strength Test Apparatus (UTCM-4223)

Compression and Flexural Machines Product Code: Description: UTCM-4223 Tensile Adhesion Strength Test Apparatus can be fitted to the UTEST Cement Compression or Compression/Tension testing machines. This apparatu...

Marshall / CBR / Proctor Specimen Extruder (UTGE-0080)

• Manufacturer: Proctor

Field Inspection and Sampling The UTGE-0080 Extruder is designed to easily extrude specimens from marshall and CBR, standard and modified proctor moulds. The capacity of the extruder is 30 kN and is supplied comp...

Muffle Furnaces (UTD-1450)

Loss of Ignition Product Codes: Description: The UTD Series Muffle Furnaces are widely used for determining various properties of construction materials, and they cover a temperature range from 1100°C to 1600°C, ...

Muffle Furnace (UTD-1462)

Physical and Chemical Properties Product Code: UTD-1462 Muffle Furnace is used for determining the loss on ignition and insoluble residue of cement and building lime. Working temperature and time can be programme...

Automatic Programmable Mortar Mixer (UTCM-0885E)

Strength Tests The Automatic Programmable Mortar Mixers are supplied complete with: Bowl, 5 lt (approx.) Beater Product Code: Description: The mixers have been designed to mix mortars and cement pastes primarily ...

Manuel Mortar Mixers (UTCM-0875E)

Strength Tests The Manual Mortar Mixers are supplied complete with: Bowl, 5 L (approx.) Beater Product Code: Description: The UTCM-0875 Manual Mortar Mixer has a 5 litre (approx.) capacity, they have been designe...

Three Gang Mould (UTCM-0892.2)

Strength Tests Product Code: Description: All moulds have been manufactured from steel except UTCM-0898 moulded using engineered plastic and all internal surfaces are machined. Minimum surface hardness of UTCM- 0...

Vibrating Machine (UTCM-0930)

Strength Tests Product Code: Description: The UTCM-0930 Vibrating Machine is used for the preparation and compaction of 70.7 mm mortar cube specimens. The mould table is mounted on four springs attached to an ecc...

Slaking Vessel (UTCM-0681)

Compression and Flexural Machines UTCM-0681 Slaking Vessel is used to determine the yield of lime by leaving the lime sample to slake into. Stainless steel made and double walled insulated. The cylinder has insid...

Centrifuge Extractor (UTAS-0030)

Analysis of Bituminous Mixtures Product Codes: Description: The Centrifuges are used for the determination of the bitumen percentage in bituminous mixtures. All models comprise a removable precision-machined roto...

Plastikoil Concept Former

• Manufacturer: Press Products

About Plastikoil Concept Former The Concept Former allows you the flexibility to produce exactly what you need, when you need it. Six stocked filament profiles yield twenty four different coil diameters from 6mm ...

Bindquip CoilMac 41V Manual Punch

• Manufacturer: Bindquip

About BindQuip CM-41V Manual Punch The BindQuip CM-41V Manual Punch is able to punch between 10-12 (80gsm) pages per punch and is a good choice for low volume binding. This machine is compact and has retractable ...

Bindquip Thumb Cut Punch & Corner Rounder

About the Bindquip Thumb Cut Punch & Corner Rounder This desktop machine is small, compact and has the ability to punch thumb cut holes or round corners. With additional interchangeable dies, this machine is vers...