Used Forging

AJAX 1" UPSETTER

• Manufacturer: Ajax

1" UPSETTER * Air clutch * Air brake **Rebuilt by Ajax in 1979 Including: New Brake, Elec. Controls, Flywheel Brake, Clutch was redesigned (anti-friction bearing replaced old bronze bushing type, Trabon lubricati...

1996 ASAHI OKUMA AT-635

• Manufacturer: Okuma
• Model: AT-635

2 DIE 2 BLOW COLD HEADER * BUSHING CUT-OFF * OSG MONITOR * TIMED POSITIVE KNOCKOUT IN 1ST AND 2ND * WIRE STRAIGHTENER * SOUND ENCLOSURE * LOTS of TOOLING

National #6

• Manufacturer: National

EUMUCO RW1

• Manufacturer: SMS Eumuco
• Model: RW1

HASENCLEVER AWF 400/800/800 W/Automatic Manipulator

• Manufacturer: Hasenclever

AJAX #0

• Manufacturer: Ajax

NAZEL 4B 600LBS Blacksmith Power Forging Hammer Pneumatic Self-Contained

“Normal wear from use but that- OVER 30 years ago, and since then- always kept in dry storage. You MUST read the history of it below. Great condition with smooth ram cylinder surface. i.e. no scoring. It will nee...

Hyodong HSBF-408 // HSBF-406 // HSBF-306

• Manufacturer: Hyodong

Three & Four Die Bolt Former [ New Compact Design ] Bolt Size: M6 [1/4"] (10AF) Bolt Size: M8 [5/16"] (14AF) No of dies: 3-4 Dies Forging Load: 300kN // 500kN Output speed: up to 400/300ppm * New Simple & Compact...

1993 NAKASHIMADA NP-40

• Manufacturer: Nakashimada

2 DIE 3 BLOW COLD HEADER Cutoff Diameter Range: 2.5mm - 4mm Max Cutoff Length: 25mm Max. Shank Length: 30mm Max. Transferable Length: 35mm Die Kickout (1st): 50mm Die Kickout (2nd): 30mm Max. PKO Stroke: 15mm O...

HILL-ACME 1-1/4″ UPSETTER

• Manufacturer: Hill Acme

LOT OF (7) RAMS

• Manufacturer: Rams

LOT OF (7) RAMS

NATIONAL 1"

• Manufacturer: National

1" FIVE DIE COLD NUT FORMER NUMBER OF DIES: 5 MAX ACROSS FLATS:1-5/8" MAXIMUM NUT HEIGHT: 1-5/16" CUTTER DIAMETER: 3-5/8" PIECES PER MINUTE: 50 MOTOR: R.P.M. 60 CYCLES, 720, 50

NATIONAL 164

• Manufacturer: National

4 DIE HIGH SPEED COLD NUT FORMER Capacity: 5/8" | Number of dies: 4 | Nut size: 5/8" (16MM) | Maximum nut height: 11/16" (17.5MM) | Max. across flats, hex: 15/16" (24MM) | Production speed: 200PPM | Weight (appro...

AJAX 4" UPSETTER

• Manufacturer: Ajax

4" UPSETTER Capacity: 4" | Upsetting power: 800t | Usable upsetting stroke: 13-1/2" | Strokes min: 35 | Die opening: 6" | Stock gather: 9" | Hold on: 4" | Die height: 26" | Die thickness: 8" | Motor: 40hp | Appro...

ANVILE AND STEEL WEIGHT

ANVILE AND STEEL WEIGHT