Used Cnc Lathes

Trusted Seller
2006 Hankook 9NC
- Manufacturer: Hankook
- Model: 9NC
Max Swing Over Bed 37.4″ Max Swing Over Cross Slide 24.8″ Distance Between Centers 157.48″ Maximum turning length 151″ Spindle bore 9.875″ Min/Max Rpm 3 – 630 RPM Fanuc 21i-TB Control Front/Rear 24″ Manual Chucks...
$99,500 USD
Chicago, IL
Trusted Seller
1996 Star SR-32
- Manufacturer: Star
- Model: SR-32
Star SR-32 CNC Swiss-Type Turning Center, Fanuc 16T CNC Control, 7-Axis, 01-1/4"/2mm Diameter Capacity, Parts Conveyor, LNS Hydrobar Mini Sprint Barfeeder, Chip Conveyor, New 1996. Fanuc 16T CNC Control, Collet f...
Cincinnati, OH
2003 Fryer CNC Combination Flat lathe, Model ET 30, 30" x 80", 1500 rpm, 30 hp, Conversational Fryer CNC ID17637
- Manufacturer: Fryer
- Model: ET-30
- Spindle bore: 152.39999999999998 millimeter
Maximum swing: 30" | Swing over cross slide: 15" | Distance between centers: 80" | Spindle drive motor: 30 HP | Spindle speed: 1500 RPM | Spindle bore: 6" | Equipped with: Fryer Touch 2000i CNC, 20" 6 Jaw Chuck ...
Pennsylvania, USA
Trusted Seller
Okuma LU-300 CNC Lathe Main Spindle Headstock
- Manufacturer: Okuma
- Model: LU300
In Good Used Condition. Was removed from an Okuma LU-300 Lathe. 3" Bore dia x 21-3/4" length. 14" x 27" base. 24-3/4" height. If this item ships as Flat Rate Freight please see details in Shipping tab
$850 USD
Millersburg, IN
Trusted Seller
Okuma LU-300 CNC Lathe Main Spindle Headstock
- Manufacturer: Okuma
- Model: LU300
In Good Used Condition. Was removed from an Okuma LU-300 Lathe. 2-7/16" Bore dia x 20" length. 3.73" dia at nose end. 14" x 27" base. 24-3/4" height. If this item ships as Flat Rate Freight please see details i...
$850 USD
Millersburg, IN
Trusted Seller
Okuma LU-15 CNC Lathe Main Spindle Headstock
- Manufacturer: Okuma
- Model: LU15
In Good Used Condition. Was removed from an Okuma LU-15 Lathe. 3.5" Bore dia x 29" length. 15-1/2" x 20" base. 18" height. If this item ships as Flat Rate Freight please see details in Shipping tab
$1,020 USD
Millersburg, IN
Trusted Seller
Okuma LU-300 CNC Lathe Main Spindle Headstock
- Manufacturer: Okuma
- Model: LU300
In Good Used Condition. Was removed from an Okuma LU-300 Lathe. 3" Bore dia x 21-3/4" length. 14" x 27" base. 24-3/4" height. If this item ships as Flat Rate Freight please see details in Shipping tab
$850 USD
Millersburg, IN
Trusted Seller
2003 Citizen L20VIII CNC Swiss Type Lathe ()
- Manufacturer: Citizen
- Model: L20VIII
Imperial Metric Citizen L20VIII CNC Swiss Type Lathe (2003) Main Spindle Max. machining diameter ....................... 3/4" (.79") Max. machining length per one chuck ........... 7.87" Max. drilling diameter .....
Elk Grove Village, IL
Trusted Seller
Okuma LU-15 CNC Lathe Main Spindle Headstock
- Manufacturer: Okuma
- Model: LU15
In Good Used Condition. Was removed from an Okuma LU-15 Lathe. 3.5" Bore dia x 19" length. 15-1/2" x 20" base. 18" height. If this item ships as Flat Rate Freight please see details in Shipping tab
$1,232 USD
Millersburg, IN
Trusted Seller
Okuma LU-15 CNC Lathe Main Spindle Headstock
- Manufacturer: Okuma
- Model: LU15
In Good Used Condition. Was removed from an Okuma LU-15 Lathe. 3.5" Bore dia x 20" length. 15-1/2" x 20" base. 18" height. If this item ships as Flat Rate Freight please see details in Shipping tab
$850 USD
Millersburg, IN
Trusted Seller
Okuma LB25 CNC Lathe w/ Donaldson Mist Collector & Chip Conveyor
- Manufacturer: Donaldson / Torit / DCE
Okuma Model: LB25 SR/ VIN: 0702-1490, CNC Lathe w/ Donaldson Mist Collector & Chip Conveyor
Wixom, MI
Trusted Seller
1980 8" chuck Okuma LC-20 1-ST CNC Chucking Lathe
- Manufacturer: Okuma
- Model: LC20
- Spindle bore: 50.8 millimeter
Imperial Metric Okuma LC-20 1-ST CNC Chucking Lathe Equipped with: OSP-3000 CNC
Elk Grove Village, IL
Trusted Seller
Okuma LU-15 Horizontal CNC Lathe Tailstock Assembly
- Manufacturer: Okuma
- Model: LU15
In Good Used Condition. Was removed from an Okuma LU-15 Lathe. If this item ships as Flat Rate Freight please see details in Shipping tab
$850 USD
Millersburg, IN
Trusted Seller
Johnford, TC-35 CNC Lathe w/ Multi-station Turret, Mist Collector & Chip Conveyor
- Manufacturer: Johnford
- Model: TC35
Johnford Model: TC-35 CNC Lathe w/ Multi-station Turret, Mist Collector & Chip Conveyor
Wixom, MI
Trusted Seller
1997 Johnford CNC Lathe w/ Sliding Table & Fanuc Controls
- Manufacturer: Fanuc
1997 Johnford Model: SCM-5000 SR/ VIN: VL6011, CNC Lathe w/ Sliding Table & Fanuc Controls
Wixom, MI
Hyundai SKT-250 CNC Lathe
- Manufacturer: Hyundai
- Model: SKT-250
Good condition Hyundai SKT-250 CNC Lathes manufactured in 2005. Located in United Kingdom and other countries. Click request price for more information.
United Kingdom