Processing » Heat Exchangers » Shell and Tube Heat Exchangers » Alberta

Building Filters

16

Used Shell And Tube Heat Exchangers in Alberta, Canada

Trusted Seller
2010 Exchanger Industries Ltd. 10-3133
- Manufacturer: Exchanger Industries Ltd.
Produced Oil, Gas and Water Heat Exchanger Exchanger Industries in 2010
Taber, Canada
Trusted Seller
1997 Alberta Exchanger S8.3987
- Manufacturer: Alberta Exchanger
availability subject to redeployment verification Service type: Sweet | Pasc condition rating: C | Condition details: Must be gone through completely | Skidded: No | Housed: No | Connection status: Disconnected |...
Kitscoty, Canada
Trusted Seller
1994 15" 438 ft² Shell & Tube Exchanger
- Manufacturer: Exchanger Industries
Tubes: 116 x 0.75″ OD x 16 BWG Shell Material: SA-312-340L Stainless Steel Head Material: SA-312-340L Stainless Steel Tube Material: SA-249-304L Radiography: 100% (RT-1) Corrosion Allowance: 0.0635″ “U” Stamp: Yes
Beiseker, Canada
Trusted Seller
1997 Cessco Amine Reboiler H-820
- Manufacturer: Cessco
Details - Amine Reboiler H-820 - Make: Cessco - Year: 1997 - S/N 3626 - MAWP: 75 - MDMT: -20°F at 75 PSIG - Firetube: 4mm BTU/hr - Radiography: RT-1 - Heat Treatment: HT - Volume: 3031 CU FT - CRN: N-8952.2 Cal...
Lloydminster, Canada
Trusted Seller
2015 ALTEX INDUSTRIES INC. 18F41110N70410
- Manufacturer: ALTEX INDUSTRIES INC.
Service type: Sweet | Pasc condition rating: B | Skidded: No | Housed: No | Connection status: Connected | Units available: 2 | Exchanger type: Shell & Tube | Diameter: 32.3" | Diameter(unit of measure): inches ...
Lloydminster, Canada
Trusted Seller
1986 XCHANGER Industries 86-1656A
- Manufacturer: XChanger
availability subject to redeployment verification Service type: Sweet | Pasc condition rating: C | Condition details: Must be gone through- modified in 2015 | Skidded: No | Housed: No | Connection status: Disconn...
Kitscoty, Canada
Trusted Seller
1997 Thermotech energy systems H361
- Manufacturer: Thermotech energy systems
availability subject to redeployment verification Pasc condition rating: C | Condition details: Must be gone through completely | Skidded: No | Housed: No | Connection status: Disconnected | Exchanger type: Shell...
Kitscoty, Canada
Trusted Seller
2014 Kam Thermal Equipment 6189
- Manufacturer: Kam Thermal Equipment
availability subject to redeployment verification Service type: Sweet | Pasc condition rating: C | Condition details: Must be gone through completely | Skidded: No | Housed: No | Connection status: Disconnected |...
Kitscoty, Canada
Trusted Seller
2015 Propak Systems Ltd. BKU
- Manufacturer: Maren
Size: 20″ OD x 30″ OD x 25′-0″ S/S Design Pressure Shell: 260 PSI @ 450° F Design Pressure Tubes: 260 PSI @ 500° F Inlet: (2) 4″ 300# RFWN Outlet: (2) 6″ 300# RFWN Corrosion Allowance: 0.0625″ Status: Currently c...
Beiseker, Canada
Trusted Seller
2009 Amine Reboiler (BKU)
- Manufacturer: Exchanger Industries
Tema Type: BKU 26MMBtu/h Heat Surface Area: 3681.6 Ft.² Size: 40/57-273 Shell: 50 PSI @ 300° F Tube: 333 PSI @ 400° F Head Material: SA-240-316L Stainless Steel Tube Material: SA-789-UNS31803 Duplex Stainless Ste...
Beiseker, Canada
Trusted Seller
2012 CALHEX INDUSTRIES 3244
- Manufacturer: CALHEX INDUSTRIES
Package id: 66197561 | Service type: Sweet | Pasc condition rating: B | Skidded: No | Housed: No | Connection status: Connected | Exchanger type: Shell & Tube | Diameter: 24" | Diameter(unit of measure): inches ...
Edmonton, Canada
Trusted Seller
1994 96" FWKO 260 PSI 200°F
- Manufacturer: Sure Weld
VE shows no significant findings at time of inspection. - UT done by ECHO. No significant findings were reported. - No access to PSV, insulated and on top of shell (unsafe).
Strathmore, Canada
Trusted Seller
2015 2,803 BPD Debutanizer Package (NEW - Never Used)
- Manufacturer: Propak Systems Ltd
This de-butanizer package is required to produce high value condensate. The package will separate and send any incoming gas off to the compressors, preheat the inlet stream with the tower bottoms high value conde...
Drayton Valley, Canada
Trusted Seller
2015 Altex Industires Inc 60E200
- Manufacturer: Altex Industires Inc
Service type: Sour | Pasc condition rating: B | Skidded: No | Housed: No | Connection status: Disconnected | Units available: 2 | Exchanger type: Shell & Tube | Diameter: 16" | Diameter(unit of measure): inches ...
Grande Prairie, Canada
ETL C1D1 Dual-Jacketed 100L 316L-Grade SST Reactor
- Manufacturer: Across International
ETL C1D1 Dual-Jacketed 100L 316L-Grade SST Reactor The ETL C1D1 Dual-Jacketed 100L Stainless Steel Reactor is the ultimate solution for precision, durability, and safety in critical reaction and filtration proces...
$32,375 USD
Get financing
Est. $609/mo
Calgary, Canada

12

Overview

Heat exchangers are devices designed to transfer heat between two or more fluids without mixing them. They are widely used in various industries such as HVAC, power generation, chemical processing, and automotive to efficiently manage heat transfer processes. Common types include shell and tube, plate, and air-cooled heat exchangers.

FAQ

What factors should I consider when purchasing a heat exchanger?

Consider the type of fluids involved, the required heat transfer rate, operating temperatures and pressures, and the specific application. It's also important to look at the material compatibility and maintenance requirements.

How can I ensure my heat exchanger is shipped safely?

Use a reputable shipping service experienced in handling industrial equipment. Ensure the heat exchanger is properly packed, secured, and protected against damage during transit.

What maintenance is required for a heat exchanger?

Regular maintenance includes inspecting for leaks, cleaning to remove fouling, checking for corrosion, and ensuring all connections and seals are intact. Follow the manufacturer’s recommendations for detailed maintenance procedures.