Used Machine Tools in Quebec, Canada

HECKERT WMW

• Manufacturer: Heckert

79×16'' table ISO 50 vertical and horizontal cone Universal head 3-axis digital display

SHOT PEEN PELLETS

LOT/ SHOT PEEN PELLETS (LOCATED AT 401 RUE LAFERTE, DRUMMONDVILLE, QC, J2C 3K1)

ALCECO 44-IP PUNCHING PRESS

• Manufacturer: Alceco

Product no.: US8144 | Capacity: 44 TONS | Throat: 10" | Race: 3" | Closing height: 10" | Ram adjustment: 2.5" | Dimensions of the table: 28" X 18" | Slide surface: 5.5" X 7.88" | Speed: 95 SHOTS/MINUTE | Engine:...

FLUORESCENT LIGHT FIXTURE

LOT/ FLUORESCENT LIGHT FIXTURE (LOCATED AT 565 DES ECOLES, DRUMMONDVILLE, QC, J2B 1J6)

2016 KBC TUM-1VS

AXIS TRAVEL: X: 35", Y: 12", Z: 16" SPINDLE SPEED: LOW: 60-500, HIGH: 500-4200 RPM MITUTOYO KA-200 COUNTER DIGITAL DISPLAY X-AXIS FAST FEED SLIDER LUBRICATION 3-SPEED AUTOMATIC BARREL FEED LED LIGHT SPINDLE SAFET...

VARNAMO FV-2M

• Manufacturer: Varnamo

Dimensions of the table: 60" X 12" | Speed: 35-1600 | Voltage: 575V / 60Hz / 3PH

1981 JAFO FWD32

• Manufacturer: Jafo
• Model: FWD-32

AXLE TRAVEL: X: 33.5", Y: 13", Z: 19.5" attachment: NT:40 COOLING SYSTEM 2-AXIS MINIWIZARD DIGITAL DISPLAY WORK LIGHT SPINDLE GUARD AUTOMATIC FEED WITH RAPID FEED ON 3 AXES

TOS FGV 32

• Manufacturer: TOS
• Model: FGV 32

Stroke: X: 40¼", Y:12½, Z: 17" Speed: X-Y: 20-900 (VAR) mm /min/ Z: 5.7-250 (VAR) mm/min FAST SPEED: X-Y: 1635 mm/min , Z: 460 mm/min continuous feed in 3 axes via frequency converter pivoting spindle head with m...

16 x 54 in. Monarch Lathe, DRO, Chucks, more

• Manufacturer: Monarch
• Model: 16

"Great condition, well maintained by experienced operators, normal wear from use!" 16″ x 54″ Monarch lathe, FULLY Equipped DRO, Taper, more. EQUIPPED: * Digital Read Out 2 axis * Taper turning attachment * 3 Jaw ...

4′ x 9″ MEUSER RADIAL DRILL

• Manufacturer: Meuser

4 x 9″ MEUSER RADIAL DRILL MODEL: M35R SPECIFICATIONS: DIAMETER OF COLUMN ..................... 9″ MAX DISTANCE SPINDLE TO COLUMN ......... 48″ MIN DISTANCE SPINDLE TO COLUMN ......... 6-1/2″ MAX DISTANCE SPINDLE...

DI-ACRO NO.5 PUNCHING PRESS

• Manufacturer: Di-Acro
• Model: NO 5

Product no.: US8145 | Capacity: 5 TONS | Race: 1.25" | Closing height: 7" | Ram adjustment: 1.25" | Dimensions of the table: 7.5" X 6" | Throat: 12" | Engine: 1.5 HP | Voltage: 575V / 3PH

PUNCHING PRESS BROWN BOGGS 13LW

• Manufacturer: Brown Boggs

Capacity: 20 TONS | Race: 2" | Closing height: 6" (2.5" ADJUSTMENT) | Dimensions of the table: 20" X 11" | Slide surface: 5.5" X 7.88" | Strokes per minute: 134 | Engine: 1.5 HP | Voltage: 575V / 3PH

Proturn Lathe

• Manufacturer: Proturn

SPECIFICATIONS (Approximate imperial dimensions) Swing over bed.......................................................... 430 mm (17") Center distance.......................................................... ...