Used Woodworking in Bavaria, Germany

Chipwood boiler ETA eHACK 200

ZOPF AL 100 U

• Manufacturer: Zopf

Control: conventional - | Storage location: Günzburg | Turning speeds: 2905U/min | Weight: 200kg

CHIPPER for all wooden surfaces

• Manufacturer: HMC 600

NEW MACHINE Type. QAC 600 Tomahawk We are pleased to offer: Chopping machine For the production of hewn wooden surfaces / beams etc. in the horizontal plane. You can also just brush. Type QAC 600 Maximum worki...

HUNDEGGER Speedcut SC 3 available from Dec. 25

• Manufacturer: HUNDEGGER

I am pleased to offer: HUNDEGGER SC 3 with extensive features. Available around December 2025 SC3-200 fully automatic cutting system Angle and tilt drive Automatic infeed system Cross feed conveyor (5 strands,...

HUNDEGGER SPM 2 panel cutting machine with 5 axes - fully equipped

• Manufacturer: HUNDEGGER

CLT & BSP production line 12000 mm x 3100 mm x 350 mm

• Manufacturer: MINDA - REICHENBACHER - WEINIG

I am currently offering: A new and completely closed-loop production line for Production of CLT ��� CLT solid wood panels. Year of construction 2023 ��� Start of service mid-2024 Capacity approx. 25,000 m² per y...

HUNDEGGER SC 1

• Manufacturer: Hundegger

OFFER: HUNDEGGER SC 1 from late 2005 Photos of the machine assembled and disassembled… Hello, Currently, I can offer this Speedcut. One used SC 1, already disassembled by Hundegger. With only a 5-axis saw, i...

Wooden chair

Wooden bench

MACC SDT 315

• Manufacturer: Macc

Control: conventional - | Storage location: Günzburg | Sawblade tiltable: ° | Cutting width: mm | Motor output: kW | Cutting height: mm | Saw blade diameter: mm | Table dimensions: mm | Saw blade: mm | Dimension...

2025 Graule ZS 200N-F

• Manufacturer: Graule
• Model: ZS200NF

Suitable for:Wood, PVC, aluminum Crosscut and mitre saw with maximum cutting height of 200 mm Sturdy cast iron construction Precise ball bushing guide of the tool carriage on hardened and ground steel shafts Manu...

2004 Altendorf WA80

• Manufacturer: Altendorf
• Model: WA 80

CE marking Sled length: 3000 mm | Cutting width at the rip fence: 1250 mm | Cutting width at the crosscut fence: 3200 mm | Cutting depth: 120 mm | Scoring: Yes | Height adjustment saw blade: electrical | Swivel a...

2025 Graule ZS170N

• Manufacturer: Graule
• Model: ZS170N

Swivel via crank, 3kW motor power These two machine types are used for cutting to length, as well as for horizontal and vertical miter cuts. Double miter cuts are also possible. The drive with the saw blade runs ...

1976 Joos HP90

• Manufacturer: Joos
• Model: HP 90

Press area: 2500mm x 1250mm | Opening: 360mm | Heater plate top: electrical | Heater plate bottom: malfunction | Plate surface: ALU - anodized | Contact pressure: 90t | Number of cylinders: 4 | Current consumpti...

2025 Holzkraft VPS 22-51 VR ED

• Manufacturer: Holzkraft
• Model: VPS22-51 VR ED

CE marking Smooth and ergonomic operation Modular welded machine frame torsion-free and self-supporting Pre-viating device for splinter-free cutting quality Automatic avoidance of the slat bed during sawing Conti...