Used Wolf Food & Beverage Processing in Germany

Drop depositing line WOLF

• Manufacturer: Wolf

The system consists of: DDT-400 WOLF equipped with a double-head casting system for increased output Stainless steel air cooling tunnel WOLF Inlet: 2.5 metres Cooling section: 17.5 metres Outlet: 2 metres

Cutting unit WOLF - for KS-350, painted

• Manufacturer: Wolf

turntable WOLF - type TT-320-180°-R

• Manufacturer: Wolf

with approx. 320 mm working width.

belt coating machine WOLF - type DRA-1200, YOM 2008.

• Manufacturer: Wolf

The machine for coating roll-on products with chocolate or similar fat masses. For this purpose, the large front door with Plexiglas window is opened and filled with the desired quantity of inserts. The volume an...

Air cooling duct WOLF - Type W-S/K-1300

• Manufacturer: Wolf

The duct is equipped with contact cooling by circulating cold water at the bottom and radiation from above. The channel consists of: - 1.5 m infeed table with extendable deflection bar - 12 m cooling channel w...

decorating device WOLF - type Dekormatik DK-1, 520 mm working width.

• Manufacturer: Wolf

The machine is suitable for continuously decorating pralines, biscuits and other kinds of products with a line pattern. The adjustment of the required patterns is made manually by changing the motion of the XY-ax...

Second-hand Enrobing machine WOLF - Type E1/820, overhauled.

• Manufacturer: Wolf

The enrobing machine is suitable for the processing of fat masses and chocolate, whereby tempered mass must be supplied by an external tempering machine. The entire construction of the machine is made of stainles...

decorating device WOLF type - DW-320 with nozzle tube, built in 1995/12.

• Manufacturer: Wolf

Nozzle tube for mass strands WOLF - type DV-420 with holding device, year of manufacture 2023.

• Manufacturer: Wolf

2005 Wolf KWD-2

• Manufacturer: Wolf

Checkweigher Load cell: IW 15 K-02 | Machine dimensions (lxwxh): approx. 1210 x 500 x 1285 mm | Machine weight: approx. 180 kg | Connection values: 230 V, N, 50/60 Hz | Weighing performance: up to 200/min (produc...

Mould filling machine WOLF for decoratives - Type W-FW-200, working width approx.: 420 mm

• Manufacturer: Wolf

A WOLF mould filling machine, type FF 400, suitable for continuously filling Makrolon moulds by flooding with chocolate or fat glaze. The moulds stacked in a magazine are taken off by a chain conveyor and passed...

Air cooling module + dry cooler WOLF - Type LKTA-200 with FKL-907, built in 2008.

• Manufacturer: Wolf

Second hand mold heating station WOLF - Type W-RS-200 for moulds 410 x 310 x 5 mm

• Manufacturer: Wolf

The machine with plexiglass bonnets and 3 Ellstein radiant heaters, belt approx. 4 meters long. Working width: 420 mm

copper coating pan, approx. 1050 mm diameter - with installed copper heating coils .

mobile stainless steel trolley - with sheets and gates