Used WMW Machine Tools in Saxony, Germany

Trusted Seller
WMW clamping angle
- Manufacturer: WMW
Clamping angle WMW used, tested ! Clamping: 1000 x 800 x 70 mm | Web width: 5x 158 mm | Groove width: 2x 162 mm | Groove depth: 12 mm | Mounting surface: 630 x 800 x 54 mm | Dimensions ( horizontal ): 1000 x 800 ...
$1,979 USD
Zschepplin, Germany
Trusted Seller
WMW dividing head
- Manufacturer: WMW
Dividing head, dividing head, dividing table, with tailstock WMW Dividing head: Mounting: Three-jaw chuck DH 160 x 3 Diameter: Ø 160 mm, bore Ø: 42 mm -10° - +100° tiltable tailstock with quill and fixed center p...
$899 USD
Zschepplin, Germany
Trusted Seller
WMW clamping angle
- Manufacturer: WMW
Clamping angle, router table WMW used, checked! Clamping surface: 630 x 345 mm | Mounting surface: 500 x 230 mm | Groove width: 14/24 mm | Groove depth: 25 mm | 6x u-holes: Ø 16 x 28 mm | Dimensions: 710 x 350 x ...
$552 USD
Zschepplin, Germany
Trusted Seller
WMW angled table
- Manufacturer: WMW
Angled table with adjustable attachment, clamping angle, T-slotted plate WMW - Consists of 2 parts.
$3,178 USD
Zschepplin, Germany
Trusted Seller
WMW clamping angle
- Manufacturer: WMW
Clamping angle WMW 800 mm x 790 mm Web width ( center ): 50 mm, web width ( edge ): 29 / 36 mm used, tested !
$1,619 USD
Zschepplin, Germany
Trusted Seller
1980 WMW AP 870x680
- Manufacturer: WMW
Central hole Ø 180mm T-groove in accordance with DIN 650: a=22mm; h=38mm; b=40mm; c=16mm with foot support
Leipzig, Germany
Trusted Seller
WMW clamping technology set
- Manufacturer: WMW
Clamping tool set, tool holder, reducing sleeve , center point WMW 2 x fixed center point SK 45 1 x mandrel SK 50, Ø 40 mm, 80 mm long 1 x mandrel SK 50, Ø 50 mm, 235 mm long Used!
$348 USD
Zschepplin, Germany
Trusted Seller
WMW hydraulic cylinder
- Manufacturer: WMW
Hydraulic cylinder, single-acting, spring return WMW Hydraulic Cylinder for UPW 63 Spare part for WMW UPW 63! unused!
$564 USD
Zschepplin, Germany
Trusted Seller
1970 WMW AP 500x500
- Manufacturer: WMW
Type of control: other | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 1 | Table length: 500 mm | Table width: 500 mm | Table height: 100 mm | Height over floor: 100 mm | Weight of the m...
Leipzig, Germany
Trusted Seller
1970 WMW AP 800x630
- Manufacturer: WMW
surface plate with squares 100x100mm - on a frame Type of control: other | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 1 | Table length: 800 mm | Table width: 630 mm | Table height: 160...
Leipzig, Germany
Trusted Seller
WMW 800x455x250
- Manufacturer: WMW
ram plate of a PYE 160S press Use: e.g. for reducing the installation height of the press or shortening the working distance (forward run) - with centre bore Ø 40mm continuous - with 6x part circular drilling Ø 1...
Leipzig, Germany
Trusted Seller
WMW 810 x 690 x 190
- Manufacturer: WMW
T-slots centric Type of control: other | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 3 | Floor-plate length: 810 mm | Plate width: 690 mm | Plate height: 190 mm | Hole diameter: ca. 119...
Leipzig, Germany
Trusted Seller
WMW 3-jaw chuck
- Manufacturer: WMW
3-jaw chuck, three-jaw chuck WMW DH 130 x 3 (DH315x3) TGL 30-2333 Thread: M18 x 1.5, length: 20 mm (left-hand thread) Bore: Ã 30 mm, depth: 55 mm used, tested!
$180 USD
Zschepplin, Germany
Trusted Seller
WMW 3-jaw chuck
- Manufacturer: WMW
3-jaw chuck, three-jaw chuck WMW Used! Outside ø: 315 mm | Bolt circle ø: 275 mm | Bore ø: 100 mm | Height with jaws: 115 mm | Dimensions: 320 x 320 x 120 mm
$348 USD
Zschepplin, Germany
Trusted Seller
WMW drill
- Manufacturer: WMW
Twist Drill WMW Ø 69 mm x 425 mm HSS Used! Total length: 425 mm | Spiral length: 230 mm | Morse taper: MK5 | Dimensions: 430 x 70 x 70 mm
$228 USD
Zschepplin, Germany