Machine Tools » Wire Machinery » Wire Drawing » Germany

Search By Manufacturer

Search By State

Building Filters

18

Used Wire Drawing in Germany

  • Trusted Seller
    2022 ITALMEC TBNS/9

    2022 ITALMEC TBNS/9

    • Manufacturer: ITALMEC
    • Wire diameter: 3.5 mm

    Inlet wire diameter: 3,5 mm | Finished diameter: 0,6 mm | Number of drafts: 9 | Speed – meters/sec: max 25

    Norderstedt, Germany
  • Trusted Seller
    1980 MILL 7 Block

    1980 MILL 7 Block

    • Manufacturer: MILL
    • Wire diameter: 7 mm

    Inlet wire diameter: 7 mm | Number of drafts: 7 | Diameter of capstan: 550 mm | Speed -meters/sek: 12

    Norderstedt, Germany
  • Trusted Seller
    2006 TEAM MECCANICA / EUROLLS

    2006 TEAM MECCANICA / EUROLLS 6 Block

    • Manufacturer: TEAM MECCANICA / EUROLLS
    • Wire diameter: 12 mm

    Inlet wire diameter: 12 mm | Finished diameter: 2.5mm | Number of drafts: 6 | Diameter of capstan: 710 mm | Speed -meters/sek: 40

    Norderstedt, Germany
  • Trusted Seller
    2006 KOCH KGT 16/9 +

    2006 KOCH KGT 16/9 + KHS1000

    • Manufacturer: Koch
    • Wire diameter: 2.5 mm

    Inlet wire diameter: 2,5 mm | Finished wire diamter: 0,35 mm | Number of drafts: 9 | Diameter of capstan: 400 mm | Speed -meters/sek: 40 m

    Norderstedt, Germany
  • Trusted Seller
    2022 ITALMEC TBNS/9

    2022 ITALMEC TBNS/9

    • Manufacturer: ITALMEC
    • Wire diameter: 3.5 mm

    Inlet wire diameter: 3,5 mm | Finished diameter: 0,6 mm | Number of drafts: 9 | Speed – meters/sec: max 25

    Norderstedt, Germany
  • Trusted Seller
    SCHUMAG KZRP1

    SCHUMAG KZRP1

    • Manufacturer: Schumag
    • Model: KZRP

    Dia. range: 4 – 15 mm | Cutting length: 2000 – 4000 mm | Speed – meters/min: 15/30

    Norderstedt, Germany
  • MALMEDIE Fine wire drawing machine

    MALMEDIE Fine wire drawing machine

    • Manufacturer: Malmedie

    Fine wire drawing machine, 21 dies, wire elongation 20 %, inlet max. 2,5 mm, finished ø 0,4

    Monschau, Germany
  • MALMEDIE Drawing line for copper

    MALMEDIE Drawing line for copper or aluminium wire

    • Manufacturer: Malmedie

    5 block drawing line, block ø 800 mm, for round and profiled wires, inlet 9,5 mm, finished ø 2,0 mm, spooler max. 1250 mm ø

    Monschau, Germany
  • BARCRO Drawing line for copper

    BARCRO Drawing line for copper or aluminium wire

    • Manufacturer: BARCRO

    9 die double block drawing machine, slipless, mainly used for copper alloys and copper covered steel wires, inlet 8 mm ø, finished ø 1,8 mm, spooler for 630 mm bobbins

    Monschau, Germany
  • MALMEDIE Drawing line for copper

    MALMEDIE Drawing line for copper or aluminium wire

    • Manufacturer: Malmedie

    Single drawing blocks ø 525 mm (2 sets), inlet max. 15 mm ø

    Monschau, Germany
  • 1992 RMG - 28" Capstan

    1992 RMG - 28" Capstan In-Line Wire Drawing Machine

    • Manufacturer: RMG

    Max. o: 11 mm | Capstan ø: 700 | Min.-max. m./min.: 24,5

    Altdorf bei Nürnberg, Germany
  • 1977 Fe. FASTENER ENGINEERS -

    1977 Fe. FASTENER ENGINEERS - DTM-05 24 In-Line Wire Drawer

    • Manufacturer: Fastener Engineers

    Max. o: 8 mm | Capstan ø: 600 | Min.-max. m./min.: 30

    Altdorf bei Nürnberg, Germany
  • 1987 Fe. FASTENER ENGINEERS -

    1987 Fe. FASTENER ENGINEERS - 34 "LEWIS MACHINE" In-Line Wire Drawer

    • Manufacturer: Fastener Engineers

    Max. o: 6.4 mm | Capstan ø: 500 | Min.-max. m./min.: 27,5

    Altdorf bei Nürnberg, Germany
  • 1979 Fe. FASTENER ENGINEERS -

    1979 Fe. FASTENER ENGINEERS - DTM-03-20 In-Line Wire Drawer

    • Manufacturer: Fastener Engineers

    Freshly drawn wire is easier to form, and the heat generated by the drawing process improves the cold forming process. Many difficult cold-headed specials cannot be produced without utilizing a wire drawer.

    Altdorf bei Nürnberg, Germany
  • HERBORN TF II d

    HERBORN TF II d

    • Manufacturer: HERBORN

    Fine wire drawing machine, type TF II d, 11 dies, wire elongation 24 %, inlet 2,1 mm ø, finished 0,1 – 0,5 mm ø

    Monschau, Germany
12

Overview

Wire drawing machines are used in the metalworking industry to reduce the diameter of wire by pulling it through a series of dies. These machines are essential for producing wire of various sizes and materials for use in electrical wiring, cables, springs, and other applications. They offer precision and efficiency in the manufacturing process.

FAQ

What should I consider when buying a used wire drawing machine?

Check the machine's age, overall condition, and maintenance history. Inspect the dies and pulling mechanism for signs of wear or damage. Ensure it meets the specifications for your wire production needs.

How do I ensure the wire drawing machine is shipped safely to my location?

Use a reputable transport service experienced in handling heavy machinery. Secure the machine properly and consider using protective covers to prevent damage during transit.

What is the maintenance schedule for a wire drawing machine?

Regular maintenance includes checking and replacing worn dies, lubricating moving parts, inspecting the pulling mechanism, and ensuring proper tensioning. Follow the manufacturer's maintenance guidelines for optimal performance.