Machine Tools » Wire Machinery » Wire Bullblocks

Search By Manufacturer

Search By Country

Building Filters

31

Used Wire Bullblocks

  • Trusted Seller
    9" VERTICAL WIRE DRAWING BLOCK

    9" VERTICAL WIRE DRAWING BLOCK

    • Manufacturer: 9" VERTICAL

    PURCHASER MUST PROVIDE DIE HOLDER DRIVE MOTOR:-MANUFACTURER: DAYTON DC GEARMOTOR -MODEL" 62418A -RATIO 11.8 TO 1 -1/2 HP, 1725 RPM, 90 VOLT, 5 AMPS CONTROLS:-MANUFACTURER: WARNER ELECTRIC -VARIABLE SPEED

    North Branford, CT
  • Trusted Seller
    CUSTOM BUILT 20mm WIRE DRAWING

    CUSTOM BUILT 20mm WIRE DRAWING BULL BLOCK (14476)

    • Manufacturer: Custom Built

    20mm (0.787") WIRE DRAWING BULL BLOCK (14476) 20mm (0.787") WIRE DRAWING BULL BLOCK Stock # 14476 Year of manufacture 2001 Drum diameter Available Ø 560 and 750 mm. – Interchangeable Wire range Ø 5- 20 mm. Drawin...

    North Branford, CT
  • Trusted Seller
    VAUGHN 10

    VAUGHN 10

    • Manufacturer: VAUGHN

    For sale is a used 25" VAUGHN Model 10 Single Die Wire Drawing Bullblock (Stock #14208). This equipment, manufactured by Vaughn Machine, features a 25" block diameter and runs on an HH4 HP 240 volt DC motor. Perf...

    North Branford, CT
  • Trusted Seller
    VAUGHN #22 MOTOBLOC SINGLE DIE

    VAUGHN #22 MOTOBLOC SINGLE DIE

    • Manufacturer: VAUGHN

    #22 VAUGHN "MOTOBLOC" SINGLE DECK VERTICAL DRAW BLOCK: STOCK #14250 #22 VAUGHN "MOTOBLOC" SINGLE DECK VERTICAL DRAW BLOCK STOCK #14250 MODEL ........................ 22 ELECTRICAL CONTROL CABINET **Temporary Spec...

    North Branford, CT
  • Trusted Seller
    9/16" (14mm) VAUGHN #15 DOUBLE

    9/16" (14mm) VAUGHN #15 DOUBLE DECK MOTOBLOC BULLBLOCK Stock # 14207

    • Manufacturer: VAUGHN

    9/16" (14mm) VAUGHN #15 DOUBLE DECK MOTOBLOC BULLBLOCK Stock # 14207 9/16" (14MM) VAUGHN #15 DOUBLE DECK MOTOBLOC BULLBLOCK MANUFACTURER - VAUGHN MODEL NUMBER - 15 TYPE - MOTOBLOC DOUBLE DECK SERIAL NUMBER - 1351...

    North Branford, CT
  • Trusted Seller
    FASTENER ENG 20"

    FASTENER ENG 20"

    • Manufacturer: FASTENER ENG

    20" FASTENER ENGINEERING Model DA-03-2020 In-Line Wire Drawer, a powerful addition to your workshop. With a double capstan and manually operated pressure rolls and controls for forward/reverse/jog, this machinery...

    North Branford, CT
  • Trusted Seller
    VAUGHN 12"

    VAUGHN 12"

    • Manufacturer: VAUGHN

    For Sale: Well-maintained 12" (304mm) VAUGHN Model 8SD Vertical Bullblock. This used wire machinery piece has a 10/13 HP DC Reliance drive motor with operating speeds of 120-350 FPM. Featuring an impressive gear ...

    North Branford, CT
  • Trusted Seller
    BARRON & CAROWTH 22

    BARRON & CAROWTH 22

    • Manufacturer: BARRON & CAROWTH

    22" (559mm) BARRON & CROWTHER SINGLE DIE BULL BLOCK (13719) MACHINE# 13719 SPECIFICATIONS:MANUFACTURER: BARRON AND CROWTHER (U.K.) LTD. (PREVIOUSLY RUN ON 480 VOLT, 60 HERTZ) TWO SPEED GEAR CHANGER:INPUT SPEED: 7...

    North Branford, CT
  • MILL Model TV-100 Bullblock

    MILL Model TV-100 Bullblock

      single block and die block dia.: 830mm (32.67″) 55kW motor, 1350RPM, 440V, 50Hz max. rod enter: 30mm past usage: 28-25mm-30MnB4 annealed wire rod (RA: 17%) tensile strength annealed: 23mm rod 470N/mm2 min. wire e...

      Bristol, CT
    • Herborn Model EG-1 Double Deck

      Herborn Model EG-1 Double Deck Bullblock

        30″/22″ block max. wire dia. w/double draw start: .218″ – finish .188″ 2nd draw: .188″ to .148″ single draw max. .437″- finish .375″ 120HP AC (90 kw) motor 3 speed gearbox max. speed 900 FPM approx furnace AC ele...

        Bristol, CT
      • Malmedie Rod Drawing Horizontal Bullblock

        Malmedie Rod Drawing Horizontal Bullblock Line

        • Manufacturer: Malmedie

        block dia.: .915mm (36″) 110KW (147.5HP) min.-max. working dia.: 15-25mm tensile: 500N/mm2 max. area reduction: 8% coil dimensions: external coil: 1300mm (50″), internal: 900mm (36″) coil weight: 1500Kg(3,300 lbs...

        Bristol, CT
      • Trusted Seller
        no-image_en.png

        VAUGHN 10

        • Manufacturer: VAUGHN

        Used 25" VAUGHN Wire Drawing Bullblock (model 10). Known for its capabilities in wire machinery, this Bullblock carries stock #14227. Please note, specifications are subject to revisions and buyers verification. ...

        North Branford, CT
      • Trusted Seller
        no-image_en.png

        RUESCH 12" SINDLE DIE BULL BLOCK (14578)

        • Manufacturer: Ruesch

        North Branford, CT
      • Trusted Seller
        1986 MALMEDIE

        1986 MALMEDIE

        • Manufacturer: Malmedie
        • Wire diameter: 12 mm

        Inlet wire diameter: 12mm | Number of drafts: 1 | Capstan diamter: 650 mm | Speed – meters/min: 65,5-97,9-130

        Norderstedt, Germany
      • Trusted Seller
        MARIO FRIGERIO 460/600

        MARIO FRIGERIO 460/600

        • Manufacturer: MARIO FRIGERIO
        • Wire diameter: 10 mm

        Inlet wire diameter: 10mm | Number of drafts: 1 | Pulling force: 4,5 to | Capstan diamter: 460/600 mm

        Norderstedt, Germany
      123

      Overview

      Wire bullblocks are essential pieces of equipment in the wire drawing industry, used to draw wire through a series of dies to reduce its diameter. These machines are designed for high efficiency and precision, capable of handling various types of metals including steel, copper, and aluminum. They are crucial for producing wire that meets specific thickness and strength requirements for various industrial applications.

      FAQ

      What should I consider when buying a used wire bullblock?

      Check the machine's age, overall condition, and maintenance history. Ensure it is compatible with the type of wire you need to process and meets your production requirements.

      How do I ensure the wire bullblock is shipped safely to my location?

      Use a reputable transport service that specializes in heavy machinery. Make sure the machine is properly secured and protected during transit to avoid any damage.

      What is the maintenance schedule for a wire bullblock?

      Regular maintenance includes inspecting and lubricating moving parts, checking electrical systems, and ensuring the dies are in good condition. Follow the manufacturer's maintenance manual for specific intervals and procedures.