New & Used Wickman Lathes

MULTISPINDLE LATHE WICKMAN 1”

• Manufacturer: Wickman

USED MULTISPINDLE LATHE WICKMAN1” Equipped with : 1 Pick up 2 Independents 1 Electromagnetic clutch 1 Chips conveyor 1 Barloader integrated PIETRO CUCCHI

1990 MULTISPINDLE LATHE WICKMAN 1”3/4

• Manufacturer: Wickman

USED MULTISPINDLE LATHE WICKMAN 1”3/4 Equipped with : 1 Pick up 1 Spindle stop system 2 Independents 1 Chips Conveyor 1 Tapping machine 1 Recessing Device 1 Pneumatic parts collector 1 Electro magnetic clutch sys...

WICKMAN 1 3/4" - 8

• Manufacturer: Wickman

Number of spindles: 8 | Capacity round bar: 45 mm | Capacity square bar: 31 mm | Capacity hexagon bar: 39 mm | From: 96 t/min | Up to: 1243 t/min | Number (steps): 24 | Voltage 50 hz 3x: 380 Volt | Power: 22 kW ...

WICKMAN 5/8″-6 multispindle lathe

• Manufacturer: Wickman

6-spindle automatic lathe Bar diameter: Bar feed: Feed stroke on hexagonal block: 0 - 50.8 mm. Cross slide feed stroke: Lower: 0 - 12.7 mm - Upper: 0 - 12.7 mm - Intermediate: 0 - 8.9 mm Feed range at max. stroke...

WICKMAN multi-spindle lathe 1"-6

• Manufacturer: Wickman

Multi-spindle automatic lathe No. 6 spindles Bar diameter: Feed stroke: Approach stroke on main tool block: Cross slide feed stroke: Motor: 11 kw at 1450 rpm. Spindle speed range: Normal-with-stop cycle time rang...

WICKMAN multi-spindle lathe 1"-6

• Manufacturer: Wickman

Multi-spindle automatic lathe No. 6 spindles. Bar diameter: Feed stroke: On the main tool block: 0 - 63.5 mm - On independent slides: 0 - 63.5mm Approach travel on the main tool block: Normal: 63.5 mm - Special: ...

1992 WICKMAN 3 1/4" X 6

• Manufacturer: Wickman

Wickman 3 1/4" multi-spindle automatic lathe with 6 spindles, serviced, operating normally. Immediate delivery, we carry it inside the container. The machine comes with 10 tool holders as per the photo.

1980 WICKMAN 1“-6 multi-spindle lathe

• Manufacturer: Wickman

Multi-spindle automatic lathe Bar diameter: Feed stroke: On main tool block: 0 - 63.5 mm - On independent slides: 0 - 63.5 mm. Approach stroke on main tool block: Normal 63.5 mm - Special 50.8 mm. Cross slide fee...

WICKMAN multi-spindle lathe 1"-6 S

• Manufacturer: Wickman

Bar diameter: Feed stroke: Approach travel on main tool block: Normal: 63.5 mm - Special: 50.8 mm. Cross slide feed stroke: Motor 11 kw at 1450 rpm. Spindle speed range: 247 ÷ 300 rpm Cycle time range: normal 2.4...

WICKMAN multi-spindle lathe 1"-6

• Manufacturer: Wickman

Multi-spindle automatic lathe No. 6 spindles. Bar diameter: Feed stroke on the main tool block: 0 - 63.5 mm Approach travel on main tool block: Normal: 63.5 mm - Special: 50.8 mm Cross slide feed stroke: Motor: 1...

WICKMAN multi-spindle lathe 1"-6

• Manufacturer: Wickman

Multi-spindle automatic lathe No. 6 spindles. Bar diameter: Feed strokes: On main tool block: 0-63.5 mm - on independent slides: 0-63.5 mm Approach stroke on main tool block: Normal: 63.5 mm - Special: 50.8 mm Cr...

WICKMAN 5/8″-6 multispindle lathe

• Manufacturer: Wickman

6 spindles Bar diameter: Bar feed: Standard: 0 - 88.9 mm - Special: 0 - 100 mm - Double bar feed Feed stroke on hexagonal block: 0 - 50.8 mm Cross slide feed stroke: Lower: 0 - 12.7 mm - Upper: 0 - 12.7 mm - Inte...

Wickman W138

• Manufacturer: Wickman

Wickman W1

• Manufacturer: Wickman