Used Saws in Greater Poland, Poland

Panhnas 690 type 320cm sliding table saw

Panhans sliding table saw, 320 cm carriage on bars, hydraulic up-down and angle adjustment of the saw blade, 5.5 kW main motor, separate scoring unit, 3 cutting speeds, maximum blade size 400 mm, machine in good ...

Robland PS 3200 silver line sliding table saw

• Manufacturer: Robland

Cart: 320cm | Main engine: 7KW | Rotation speed: 3 | Maximum shield size: 450mm | Slope: 0-45, electrically adjustable with readout | Up-and-down saw: electrically adjustable, no reading | Culaga on the right si...

Ortza 320cm format saw

320cm Ortza Sliding Table Saw 5.5kW main motor, 4 speeds, Scoring saw, 320cm carriage, Right-side culage manually adjustable up to 1300mm, Manually adjustable tilt from 0-45°, Manually adjustable up and down, Mac...

Felder K500S panel saw

• Manufacturer: Felder

Felder K500s sliding table saw with carriage The length of the trolley: 250 cm | Has an undercutter: Yes | Engine size: 4 KW | Engine size undercutter: 0,75 KW | Up-down adjustment: Yes, manual | 0-45° adjustment...

Kamro sliding table saw

Kamro Sliding Table Saw 150cm carriage, 5.5kW main motor, 2 cutting speeds, 400 blades maximum, manual up-down blade adjustment, 90cm cutting width on the right side, and fully functional.

Griggio 940 Band Saw

• Manufacturer: Griggio

Griggio Band Saw Wheel width: 940mm 5.5kW motor, 380V power supply Tilting table Band dimensions: min. 6590 - max. 6710mm Machine dimensions: h: 286cm, w: 160cm, l: 100cm (can be transported horizontally) Machine...

Vertical Wall Saw

Vertical wall saw, 220V power supply, cutting unit adjustable in two directions, dimensions 3 meters by 2.3 meters, saw in good working order, ready to work,

Rema 150cm sliding table saw

• Manufacturer: Rema

Rema sliding table saw, 150cm carriage, manually adjustable saw blade up and down, 6kW main motor, can be tested before purchase.

Robland NZ 3800 format saw

• Manufacturer: Robland

Robland NZ3800 sliding table saw with a carriage, scoring unit with a separate motor, carriage length 380 cm, 0-45° tilt adjustment with electrical readout, saw blade up and down adjustment, motorized right-hand ...

Scm 320cm sliding table saw

• Manufacturer: SCM / SCMI

SCM Linvincibile sliding table saw, 320cm carriage, motorically adjustable blade tilt and up/down, motorically adjustable right-hand culage up to 1500mm, 0.75kW scoring unit, 2-axis electrically adjustable, dimen...

EMCO EBS 400 band saw

• Manufacturer: Emco

Engine: 1,1KW | Upper wheel: 40cm | Lower wheel: 40cm | Tape: 320cm

Q45 chamboon sliding table saw

Q45 Chamboon Sliding Table Saw, similar to Paoloni 5.5kW main motor, 3 speeds, 450mm maximum blade capacity, 0.55kW scoring unit, 125mm, 20mm cutting width, 320cm carriage, right-hand culage, manually adjustable ...

APS KS-160 crosscut saw

APS KS-160 Crosscut Saw Cutting width: 450mm Maximum cutting height: 160mm with a material width of approximately 180mm Blade diameter: 550mm Motor: approximately 5.5kW, 380V Material pressure: Pneumatic blade he...

Dewalt DW729 Crosscut Saw

• Manufacturer: DeWalt

Engine: 4KW | Maximum shield size: 350mm | Cutting range: 800mm

Stenner resaw band saw

• Manufacturer: Stenner

Engine: 11KW | Wheel width: 900mm | Cutting band width: 75mm | Cutting height adjustment: manual | Cutting width adjustment: manual