Used Processing in Upper Austria, Austria

Bernardo Roller table RB 3000 A with fence

• Manufacturer: Bernardo

Product Properties Workpiece fence can be tilted into upright position, to be used on right or left side Height adjustable, galvanized steel pipes with adjustable feet Frames of rollers consist of solid U-shaped ...

Bernardo Stone cutter SCM 600 / 230 V

• Manufacturer: Bernardo

Schnitttiefe: 115 mm | Schnittlänge: 600 mm | Schnittwinkel: 90° / 45° | Diamanttrennscheibe: 350 x 25,4 mm | Tischgröße: 500 x 510 mm | Fördermenge: 600 ltr. / Stunde | Drehzahl: 2800 U/min | Motor-abgabeleistu...

Bernardo Dust collector DC 800 / 400 V

• Manufacturer: Bernardo

The DC 800 dust collector comes with significant advantages – economic operation, cost effectiveness and the chance to connect four machines simultaneously – making this model ideal for smaller workshops. Product...

Bernardo Dust collector DC 700 / 400 V

• Manufacturer: Bernardo

The DC 700 dust collector comes with significant advantages -economic operation, cost effectiveness and the chance to connect four machines simultanously - making these models ideal for smaller workshops. Product...

Bernardo Dust collectors with cartridge filter DC 650 CF / 400 V

• Manufacturer: Bernardo
• Model: DC 650

The DC 650 CF model comes complete with cartridge filter to increase the performance level (larger filter area). This model filter the air so effectively that harmful fine dust in workshops is kept to a minimum. ...

Bernardo Cyclone-extractor RLA 2700 / 400 V

• Manufacturer: Bernardo
• Model: RLA 2700

The cyclone-extractors of the RLA-series improves through the double chip filtration (cyclone / cartridge filter) the performance of your wood working machine and keep the workspace free from chips and sawdust. A...

Bernardo Dust collector with cartridge filter DC 750 CF / 400 V

• Manufacturer: Bernardo
• Model: DC 750

The DC 750 CF model comes complete with cartridge filter to increase the performance level (larger filter area). This model filters the air so effectively that harmful fine dust in workshops is kept to a minimum....

2007 Mitterer blower sprayer 10A1

Mitterer 10A1 (1081VV) Steering drawbar for lower linkage hitching Fully electric remote control | SM - 2TB Manual gearbox with two speeds Dual-head nozzle carrier with drip-stop system PTO shaft with wide-angle ...

ND250

Type of drive: Directly

1982 Fan S 220

• Manufacturer: Spänex

Type of drive: direct

2000 VSM-063-0300K

Air performance: 6,100 m³/h | Type of drive: Directly

Bernardo Sandblaster SB 1

• Manufacturer: Bernardo
• Model: SB 1

Product Properties Ideal sandblast cabin for blasting of small and medium parts Applicable for car craft, agriculture and hobbies, restoration ... Cap with vision panel and protection film Circular washer at the ...

Bernardo Stone cutter SCM 350 N / 400 V

• Manufacturer: Bernardo

Schnitttiefe: 115 mm | Schnittlänge: 620 mm | Schnittwinkel: 90° / 45° | Diamantrennscheibe: 350 x 25,4 mm | Tischgröße: 500 x 490 mm | Fördermenge: 1000 ltr. / Stunde | Drehzahl: 2800 U/min | Motor-abgabeleistu...

Bernardo Sandblaster SB 4

• Manufacturer: Bernardo
• Model: SB 4

Workspace dimension: 1110 x 820 x 810 mm | Useable grit size: 0,149 - 0,250 mm | Air consumption: 680 l/min | Required air pressure: 8,6 bar | Hopper capacity: 148 litre | Arm hole opening: 180 mm | Air connecti...

Bernardo Stone cutter SCM 1000 / 400 V

• Manufacturer: Bernardo

Cutting depth: 135 mm | Cutting length: 1000 mm | Cutting angle: 90° - 45° | Diamand cutting wheel: 350 x 25,4 mm | Table size: 1200 x 560 mm | Flow rate: 600 ltr. / h | Speed: 2800 U/min | Motor power output s1...