Used Wele Machining Centers

2012 Wele MG-530 CNC Bridge Type Machining Center

• Manufacturer: Wele

Features: Fanuc 31iMB CNC Control 32-Station Automatic Tool Changer Equipped With: Fanuc 31iMB CNC Control 32 Station Automatic Tool Changer 35 HP Spindle Motor X/Y/Z Axes Linear Scale Extension Head Universal Head

2014 WELE UA-2090

• Manufacturer: Wele

SPECIFICATIONS: CLAMPING AREA ........................84.6" X 35.4" X-AXIS TRAVEL (TABLE MOVEMENT)..........78.7" Y-AXIS TRAVEL (TABLE MOVEMENT)..........35.4" Z-AXIS TRAVEL (HEADSTOCK MOVEMENT)......27.5" D...

Wele UQ400 5 Axis Machining Centre UK

• Manufacturer: Wele

FOR SALE - Wele UQ400 5 Axis Machining Centre Year 2017 Low Hours Table Diameter - 320mm Max Workpiece size - 400 x 300mm Table loading capacity - 200kg T-slot size - 12 x 90 Travel X/Y/Z - 400/650/485mm Distance...

2017 Wele UQ400

• Manufacturer: Wele

Low Hours Table Diameter - 320mm Max Workpiece size - 400 x 300mm Table loading capacity - 200kg T-slot size - 12 x 90 Travel X/Y/Z - 400/650/485mm Distance from spindle nose to table top - 0-485mm A axis...

WELE MACHINING CENTER mod.AA 1165

• Manufacturer: Wele

FANUC 0i MD CNC Travel: X-axis 1100 mm Y-axis 650 mm Z-axis 600 mm Speed 8,000 rpm Accessories: High pressure 20 bar at the center of the spindle Chip conveyor 4th-axis table with M-codes COMMAND TGV200 NON-BINDI...

WELE AA965 I Vertical Machining Center

• Manufacturer: Wele
• Model: AA965
• Spindle taper: BT 40

We hereby offer this used WELE AA965 vertical machining center from 2012, located in Switzerland. This robust machine ensures optimal performance with its equipped Fanuc 18i-MB control unit. Boasting a spacious w...

2014 WELE SB-316YM

• Manufacturer: Wele

Control: Heidenhain iTNC 530 | Number of axis total: 3 | Table length: 3000 mm | Table width: 1500 mm | Longitudinal travel (x-axis): 3060 mm | Transversal travel (y-axis): 2300 mm | Vertical travel (z axis): 80...

2014 WELE AA1165

• Manufacturer: Wele
• Model: AA1165
• Spindle taper: BT 40

Type: VERTICAL CNC MACHINING CENTER | Condition: Used | Status: Very good | Type of control: Fanuc 0i-MC | X axis travel: 1.100 mm | Y axis travel: 650 mm | Z axis travel: 600 mm | Rapid feed: X/Y/Z 24/24/20 m/...

2020 WELE HMC 500

• Manufacturer: Wele

SpecificationsPresetting BLUM laser tool, Length, beam, presence, and tool wear check, Transmitter and receiver are separate and mounted on special holders, Fagor optical scales. BLUM laser tool setter, Length, r...

4 AXIS VERTICAL MACHINING CENTER, WELE – AA1565

• Manufacturer: Wele

2008 WELE AA1565#50

• Manufacturer: Wele

Specifications: Machine complete with manual guides, rigid tapping, helical interpolation, belt chip conveyor, 20 bar high pressure. Machine complete with manual guides, rigid tapping, helical interpolation, belt...

2010 WELE AA1365#40

• Manufacturer: Wele

SpecificationsWith high pressure 20 bar + 550 lt tank, flat guides, Double inner side auger, chip conveyor. With high pressure 20 bar + 550 lt tank, flat guides, Double internal side auger, chip conveyor.

WELE HMC500

• Manufacturer: Wele

Capacity: ø750x900 mmø29,53x35,43 in

2011 WELE AA1480#50

• Manufacturer: Wele

Specifications: With three internal augers, chip conveyor belt, air/water valve through the spindle. With three internal augers, chip conveyor belt, air/water valve through the spindle. Distance between table sur...