Building Filters
Weima WLK 13/75
used
- Manufacturer: Weima
Weima Shredder / EconoGrind Granulator / Blower / Cyclone / Total System Vertical Bandsaw Weima WLK 13/75 52" x 48" Opening 100 HP 15" Rotor 70 Cutters Econogrind Model ES 560 Opening 40" x 25" 100 HP M...
Indiana, USA- Trusted Seller
Slow grinder WEIMA WL20 - C3188
used
- Manufacturer: Weima
2000 mm wide slow-speed shredder, with hydraulic pusher and pivoting grate support Up to 1480 RPM Rotor Ø 368 mm This machine is available unless sold in the meantime If you need spare parts, blades, knives other...
Nevers, France 
Weima WLK15/55 & NZ6S/30 Plastic Recycling Line
used
- Manufacturer: Weima
- Model: WLK15
Weima WLK15/55 & NZ6S/30 Plastic Recycling Line Weima WLK15/55 & NZ6S/30 Plastic Recycling Line with a capacity of 66-220 pounds/hour (30-100 Kgs/hour). Consisting of: (1) Weima single roll shredder, type WLK15-5...
Weima G.200
new
- Manufacturer: Weima
With the WEIMA G.200 you receive a modern high-performance press for the draining and subsequent compressing of food, beverage and detergent packaging and containers. The drainage unit presses up to 4.2 m³ of mat...
Ilsfeld, Germany
Weima C 170
new
- Manufacturer: Weima
- Model: C 170
The C 170 is particularly suitable for small and medium-sized plants whose required throughput rate does not exceed 50-80 kg/h or 200 to 400 kg/day. Virtually any suitable material can be briquetted, such as wood...
Ilsfeld, Germany
Weima C 150
new
- Manufacturer: Weima
- Model: C 150
The C 150 is particularly suitable for small and medium-sized plants whose required throughput rate does not exceed 50-80 kg/h or 200 to 400 kg/day. Virtually any suitable material can be briquetted, such as wood...
Ilsfeld, Germany
Weima C.200
new
- Manufacturer: Weima
Hydraulic drainage presses offer an efficient, sustainable, and cost-effective solution for managing machine scraps, such as chips generated through turning, milling, sawing, or drilling. The C.200 dewaters and c...
Ilsfeld, Germany- Trusted Seller
WEIMA WL 7 1.000 mm. 22 kw
used
- Manufacturer: Weima
WEIMA SINGLE SHAFT SHREDDER Type W L 7 for wood 22 kw drive checked Infeed 1.200 x 1.000 mm. hydraulic ram pump drive 0,75kw checked Rotor width 1.000 mm. Rotor diameter 368 mm N.24 cutting pieces (new) ...
Issogne, Italy