Used Processing in Ontario, Canada

Air Dryer

• Manufacturer: Dvair

Model: U031-281TT serial#: 13053589933-12 -Max GPD: 24 -PSI: 80 -50/60 HZ -1.40 A -tested on Dec 12/ 22, works great

thermal Transfer air Cooler for air compressor 2 of 2 partner is B1129

-Brand new in box -Maximum air pressure of 250 PSI and temperature of 350 F -Model number is AA65-1 Series -In wood crate

Thermal Transfer air Cooler for air compressor

• Manufacturer: Thermal transfer products ltd.

-Brand new in box -Maximum air pressure of 250 PSI and temperature of 350 F -Model number is AA65-1 Series -In wood crate

Large plastic tank

-Previously used for tall oil -2166 IMP -Circumference: about 19ft 6" -Diameter: about 6ft 2.5" -Height: about 13ft 2.5"

Kady Disperser

• Manufacturer: Kady

-MFG: KADY -MODEL: 25 T -9'' ROTOR/STATOR MILLING HEAD -BUILT IN OIL RESERVOIR -MOTOR: 575 VOLT

Donaldson air Filter Unit DWS6 7.5 HP

• Manufacturer: Donaldson / Torit / DCE

-Shipping: 54” length x 50” width x 102” height -Electrical: 208-460/60/3 -Motor HP: 7.5 HP -Filter part number: P191889 -Model: Dws6

Donaldson air Filter Unit DWS6

• Manufacturer: Donaldson / Torit / DCE

-Shipping: 54” length x 50” width x 102” height -Model: Dws6 -208-460/60/3 Volts -Filter part number: P191889

1080 litres flat bottom fiberglass tank

-Fiberglass tank -Flat bottom -Sight line on side -4 short stationary legs -Tank dimensions are 42" diameter x 48" tall -239 imperial gallons

Stainless Steel Storage Tank

-Inlets: One 1.5", one 1" -Outlet: 1.5" -Has heating coil -Height: 37" -Diameter: 35" -Domed bottom -Distance from the ground to the bottom outlet: 2.5" -Total dimensions: -Height: 52" -Width: 36.5" -Approximate ...

Filter Regulator

• Manufacturer: SMC

-Shipping dimensions: 3" L x 3" W x 10" H -Set press 7~100psi -Max press 150 psi -Max temp 140 F

Filter Regulator

• Manufacturer: SMC

-Shipping dimensions: 2 1/2" L x 2 1/2" W x 6 1/2" H -Max press 150 psi

Sweco vibro-energy 32" with separator

• Manufacturer: Sweco

-Model: ZS30S86GWSDSFTLWC -Frame: 143TZX -1/2 HP -3 Phase -460 Volts -1.45 AMPS -1160 RPM -HZ 60 -Shipping dimensions: Height 55" x Width 47" x Length 36" -Intake diameter 5 1/2" -First level output diameter 6 3/...

Scott Equipment co. hammer mill SH18-12

• Manufacturer: Scott

-Model: SH18-12 -Baldor motor: 5HP, 1725 RPM, 208-230/460 Volts -Shipping dimensions: fits on a skid, sits 21" tall -Inlet is 27" x 20"

Lightnin Mixer

• Manufacturer: Lightnin

Agitator/ tank mixers Volt: 575, Phase: 3, HP: 1/2, AMPS: .9, RPM: 1725, Frame: 56C, manu Lightnin

Lightnin Mixer

• Manufacturer: Lightnin

Flange mount Volt: 115, RPM: 1725, AMPS: 6.6, Phase: 1, HZ:60, Serial #: 480523