Textile and leather manufacturing » Weaving

Search By Manufacturer

Search By Country

Building Filters

3552

Used Weaving

  • B&J and Cohutta Warpers with

    B&J and Cohutta Warpers with Load Cells

      Two B&J and two Cohutta warpers with load cells Coated drum Adjustable guides 100 end creel For 54.25″ to 54.5″ warper beams Beam delivery system available.

      Dalton, GA
    • 30 inch and 32 inch

      30 inch and 32 inch AL Warper Beams

        30″ and 32″ Aluminum warper beams. 54.25″ between flanges Various rib counts 1 1/4″ to 1 5/8″ shaft sizes

        Dalton, GA
      • Tufting Creels

        Tufting Creels

          High efficiency tufting creels for 3/16th, 5/32nd and 1/8th gauge tufting machines.

          Dalton, GA
        • 2016 Modra M-Tuft TMSL 101

          2016 Modra M-Tuft TMSL 101

            Modra M-Tuft YOM 2016 TMSL 101. Serial Number TM195 8 Ends

            Dalton, GA
          • Cobble Sample Machine 1/10th Gauge

            Cobble Sample Machine 1/10th Gauge Cut Graphics

              Cobble 1/10th gauge cut pile sample machine. S01 Graphics. Dual yarn feed. Tufting 19″. NB is 40″.

              Dalton, GA
            • Tuftco Sample Tufting Machine 5/32nd

              Tuftco Sample Tufting Machine 5/32nd Gauge Cut Pile

                5/32nd gauge Tuftco cut pile sample machine. S02 in-line NB, Dual yarn feed only using 1 side. 16″ cam shifter. Tufting 27″. MAX IS 28″

                Dalton, GA
              • 2012 CMC 4 Meter, 1/8th

                2012 CMC 4 Meter, 1/8th gauge Cut Pile Tufting Machine

                  CMC 4 Meter, 1/8 th gauge Cut Pile Tufting Machine. W27 YOM 2012 In-line needle bar Command Performance Inverter 1100 RPMs Tufting 144”. Max width 164”. Pile height 28/32” Rear yarn feed 24” cam shifter TTQ loope...

                  Dalton, GA
                • 1998 CMC 5 Meter, 1/10th

                  1998 CMC 5 Meter, 1/10th gauge Enh Gr Loop Tufting Machine

                    CMC 5 Meter, 1/10 th gauge Enh Gr Loop Tufting Machine. B57 YOM 1998 Command Performance Servo yarn, cloth, shifter 600 RPMs Tufting 144”. Max width 190” 6 roll servo rainbow x 2 Currently running from beams 480V...

                    Dalton, GA
                  • 2015 CMC 4 Meter, 3/16th

                    2015 CMC 4 Meter, 3/16th gauge Cut Pile Tufting Machine

                      CMC 4 Meter, 3/16 th gauge Cut Pile Tufting Machine. B40 YOM 2015 In-line needle bar Command Performance G2 Servo cloth feed 1100 RPMs Tufting 144”. Max width 165”. Pile height 32/32” 24” cam shifter 2” shim TTQ ...

                      Dalton, GA
                    • 2014 CMC 4 Meter, 3/16th

                      2014 CMC 4 Meter, 3/16th gauge Cut Pile Tufting Machine

                        CMC 4 Meter, 3/16 th gauge Cut Pile Tufting Machine. W35 YOM 2014 In-line needle bar Command Performance G2 Servo yarn & cloth feed 1000 RPMs Tufting 144”. Max width 164”. Pile height 32/32” 24” cam shifter TTQ l...

                        Dalton, GA
                      • 1989 CMC 4 Meter, 3/16th

                        1989 CMC 4 Meter, 3/16th gauge Cut Pile Tufting Machine

                          CMC 4 Meter, 3/16 th gauge Cut Pile Tufting Machine. B39 YOM 1989 In-line needle bar Stag Command Performance Inverter 1000 RPMs Tufting 137” Pile height 30/32” Rear yarn feed 24” cam shifter TTQ loopers, Gros-Be...

                          Dalton, GA
                        • 1979 Tuftco Card 12’ 3/16th

                          1979 Tuftco Card 12’ 3/16th Gauge Cut Pile Tufting Machine

                            Tuftco Card 12’ 3/16th gauge Cut Pile Tufting Machine. W19 YOM 1979 In-line needle bar Command Performance Gear Dr 900 RPMs Tufting 144” Pile height 28/32” Rear yarn feed 24” cam shifter TTQ loopers, Gros-Beckert...

                            Dalton, GA
                          • 2011 CMC 4 Meter, 5/32nd

                            2011 CMC 4 Meter, 5/32nd gauge Cut Pile Tufting Machine

                              CMC 4 Meter, 5/32 nd gauge Cut Pile Tufting Machine. W44 YOM 2011 In-line needle bar Command Performance Inverter 1000 RPMs Tufting 144”. Max width 164”. Pile height 32/32” Rear yarn feed 24” cam shifter TTQ loop...

                              Dalton, GA
                            • 2011 CMC 4 Meter, 5/32nd

                              2011 CMC 4 Meter, 5/32nd gauge Cut Pile Tufting Machine

                                CMC 4 Meter, 5/32 nd gauge Cut Pile Tufting Machine. W46 YOM 2011 In-line needle bar Command Performance Inverter 900 RPMs Tufting 144”. Max width 164”. Pile height 32/32” Rear yarn feed 24” cam shifter TTQ loope...

                                Dalton, GA
                              • 2007 CMC 4 Meter, 5/32nd

                                2007 CMC 4 Meter, 5/32nd gauge Cut Pile Tufting Machine

                                  CMC 4 Meter, 5/32 nd gauge Cut Pile Tufting Machine. B54 YOM 2007 In-line needle bar Command Performance Inverter 1000 RPMs Tufting 145”. Max width 164”. Pile height 37/32” Rear yarn feed 24” cam shifter TTQ loop...

                                  Dalton, GA
                                • Sulzer PU Weaving

                                  Sulzer PU Weaving

                                  • Manufacturer: Sulzer
                                  • Model: PU

                                  Good condition Sulzer PU Weavings available between 1986 and 2006 years. Located in China and other countries. Click request price for more information.

                                  China
                                678910

                                Overview

                                Weaving equipment encompasses a variety of machinery used in the textile industry to interlace threads or yarns to create fabrics. This category includes looms, warping machines, and other related devices. These machines are essential for producing a wide range of textiles, from simple cloth to complex woven patterns, and are used in both industrial and small-scale textile production.

                                FAQ

                                What should I consider when buying a used weaving machine?

                                Consider the machine's age, operational condition, and capacity. Check for any signs of wear and tear, and review maintenance records if available.

                                How do I ensure the weaving machine is shipped safely to my location?

                                Use a specialized machinery transport service. Ensure the machine is properly secured and protected to prevent damage during transit.

                                What is the maintenance schedule for a weaving machine?

                                Regular maintenance should include lubrication of moving parts, checking for thread tension and alignment, and cleaning to remove lint and debris. Follow the manufacturer's guidelines for detailed maintenance intervals.