Textile and leather manufacturing » Weaving » Belgium

Building Filters

25

Used frames in Belgium

  • Trusted Seller
    GTP ALUPOWER 124

    GTP ALUPOWER 124

    • Manufacturer: GTP

    Heald frames T230 (total length 2483mm) GTP ALUPOWER 124 type DRC2 15” C, very good condition. (from demo loom Picanol Optimax Terry T230; only 530 meters production)

    Deinze, Belgium
  • Trusted Seller
    2005 RIGOLE-ENGINEERING BD BS

    2005 RIGOLE-ENGINEERING BD BS

    • Manufacturer: RIGOLE-ENGINEERING

    Fancy beam stands RIGOLE ENGINEERING type BD BS year of construction 2005/2007, max. nominal width 1700mm, tension rolls, with motorized gearwheel (note : 2 frames without motor, without gearwheel), 2 adapters to...

    Deinze, Belgium
  • Trusted Seller
    2002 Chinese make DRC2

    2002 Chinese make DRC2

    • Manufacturer: Chinese make

    Heald frames for Gamma / GamMax, Chinese make under Picanol Licence, type N1150547-190, working width 1900mm, DRC2 for healds 13 C-type RC-ZU

    Deinze, Belgium
  • Trusted Seller
    2013 PICANOL

    2013 PICANOL

    • Manufacturer: Picanol

    Fancy Upper beam Frame sides for Optimax parts BA240241 (RHS) + BA240240 (LHS) + other gear parts on side LHS (from demo loom Picanol OptiMax, only 560 meters production run).

    Deinze, Belgium
  • Trusted Seller
    1999 VAMATEX P1001

    1999 VAMATEX P1001

    • Manufacturer: Vamatex

    Width 1900 mm ; 8 colours ; 6 weft feeders ; 1.5 beams; 1.5 cloth rolls / JACQUARD TYPE : 1 loom with BONAS MJ3; basic frame capacity 3072 hooks ; controller S500, Price : 15.000,00 EUR EXW 1 loom with BONAS MJ6;...

    Belgium
  • Trusted Seller
    USTER-ZELLWEGER DELTA

    USTER-ZELLWEGER DELTA

    • Manufacturer: Uster

    Drawing in machine USTER DELTA - 28 frames - 2400 mm working width - C type heddles - fancy beam option Type/Serie-Nr.:5100.222/14+Drawing cart 1 Type/Serie-Nr.:G/5155.2339-Drawing cart 2 Type/Serie-Nr.:G/5155.2338

    Deinze, Belgium
  • Trusted Seller
    2015 STAEUBLI 1781A e2* DRC*

    2015 STAEUBLI 1781A e2* DRC*

    • Manufacturer: STAEUBLI

    STAUBLI Cam boxes type 1781A e2* DRC*, 3 x construction date 12/2015, 11 cams (=full), complete with all STAUBLI-parts : 2 side levers for 11 frames DRC30, 11 horizontal levers, … can be used to change Picanol Ja...

    Deinze, Belgium
  • Trusted Seller
    2013 KOHL 2350-300

    2013 KOHL 2350-300

    • Manufacturer: KOHL

    Centre winders KOHL type 2350-300 year of construction 2013 / 2020 details : pneumatic pressure roll, electrical control unit with display, control table (365cm roll), walking floor (315cm roll), A-frame KOHL typ...

    Deinze, Belgium
  • Trusted Seller
    2020 KOHL 2350-340

    2020 KOHL 2350-340

    • Manufacturer: KOHL

    Centre winders KOHL type 2350-340 year of construction 2020/2021 details : pneumatic pressure roll, electrical control unit with display, control table (365cm roll), walking floor (355cm roll), A-frame KOHL type ...

    Deinze, Belgium
  • Trusted Seller
    1999 DORNIER HTVM/E-200

    1999 DORNIER HTVM/E-200

    • Manufacturer: Dornier

    DORNIER Tire-cord rapier loom type HTVM/E-200 serial number 41654 year of construction 1999, nominal working width 2000mm, with electronic STAUBLI dobby type 2861/2 year of construction 2004, 16 levers installed....

    Deinze, Belgium
  • Trusted Seller
    2001 NEUENHAUSER

    2001 NEUENHAUSER

    • Manufacturer: Neuenhauser

    Set of 4 overhead blowers NEUENHAUSER year of construction 2001, conformity CE, details : 2 x OUTSIDE NEUENHAUSER to blow and vacuuming dust from jacquard looms, total length 41m, 1 x INSIDE rail with NEUENHAUSER...

    Deinze, Belgium
  • Trusted Seller
    2001 VAMATEX LEONARDO

    2001 VAMATEX LEONARDO

    • Manufacturer: Vamatex
    • Model: LEONARDO

    VAMATEX rapier loom type LEONARDO T170 year of construction 2001, serial number 40068, working width 1700mm, 8 colours, STAUBLI dobby, 20 levers. Equipped with : grippers on hook guiding system, 8 weft colours in...

    Deinze, Belgium
  • Trusted Seller
    1989 SULZER P7100-B280

    1989 SULZER P7100-B280

    • Manufacturer: Sulzer
    • Model: P7100

    SULZER Projectile weaving looms type P7100-B280-N-1-1-EP-R-D1 (2x) / P7100-B280-N-4-EP-R-Q-D1 year of construction 1989 / 1991, working width 2800mm, 2 colours, with cam box SULZER, 10 levers installed. Equipment...

    Deinze, Belgium
  • Trusted Seller
    1989 GENKINGER E-KHR 20-M-GEV

    1989 GENKINGER E-KHR 20-M-GEV

    • Manufacturer: Genkinger

    Electrical beam transporter GENKINGER type E-KHR 20-M-GEV, serial number 88-1541 year of construction 1989. details : made to transport and mount warp beams or split warp beams diameter 1000mm with or without hea...

    Deinze, Belgium
  • Trusted Seller
    1990 SULZER P7100-B220

    1990 SULZER P7100-B220

    • Manufacturer: Sulzer
    • Model: P7100

    SULZER Projectile weaving looms type P7100-B220-N-1-1-EP-R-D1 (3x) / P7100-B220-N-4-EP-R-Q-D1 (x1) year of construction 1990 / 1991, serial number 113145 / 116506 / 116507 / 126971 (x1), working width 2200mm, 2 c...

    Deinze, Belgium
12

Overview

Weaving equipment encompasses a variety of machinery used in the textile industry to interlace threads or yarns to create fabrics. This category includes looms, warping machines, and other related devices. These machines are essential for producing a wide range of textiles, from simple cloth to complex woven patterns, and are used in both industrial and small-scale textile production.

FAQ

What should I consider when buying a used weaving machine?

Consider the machine's age, operational condition, and capacity. Check for any signs of wear and tear, and review maintenance records if available.

How do I ensure the weaving machine is shipped safely to my location?

Use a specialized machinery transport service. Ensure the machine is properly secured and protected to prevent damage during transit.

What is the maintenance schedule for a weaving machine?

Regular maintenance should include lubrication of moving parts, checking for thread tension and alignment, and cleaning to remove lint and debris. Follow the manufacturer's guidelines for detailed maintenance intervals.