Used Threading & Tapping

1997 VIDEX VA-10

• Manufacturer: Videx

Equipped With Max. thread diameter: 3/8" (M10) | Min. thread diameter: 1/8" (M2.5) | Max thread length: 2-3/8" (60mm) | Maximum blank length: 4" (100mm) | Maximum production: up to 800 PPM | Thread rolling die si...

1966 REED A25

• Manufacturer: Reed

Equipped With Maximum thread diameter: 3 inches | Thread dia thru feed, max: 2.5 inches | Spindle diameter: 2.125 inches | Thread length thru feed: 20 feet | Weight (approx): 6500 pounds | Floor space approx: 40"...

PRUTTON 75 CNVB

• Manufacturer: Prutton
• Model: 75CNVB

Equipped With * 24' Vibratory Bowl * Bulk Feeder Thread diameter: .050" - .250" | Max. thread length: 2-7/8" | Shank length: 4" | Dies: 90deg seg | Speed: 1500 ppm | Electrics: 480volts/3ph/60cyl | Weight: 3000 L...

MAX-TEK 2

• Manufacturer: MAX-TEK

Equipped With * Vibratory Bowl Thread diameter: .050" - .200" (Ring shank) | Max. thread length: 3" | Speed: 1500 ppm | Motor: 15hp | Electrics: 480volts/3ph/60cyl | Dimensions: 4'W x 5.5' L approx. | Weight: 300...

PRUTTON 150 AH

• Manufacturer: Prutton

Equipped With Wire diameter range: 3/16" - 3/8" | Max. thread length: 3" | Magazine feed: 30" | Max production rate: 350 ppm | Machine weight: 3,500 lbs.

MACHINES & TECHNOLOGIES ? Fastener Assembly machines

• Manufacturer: MACHINES & TECHNOLOGIES

Equipped With ?High Speed Cable Clip & Nail Assembly Machine (ZYJN) ?Stainless Steel Cap & Self - Drilling / Tapping Screw Assembly Machine (ZYK) ?Stainless Steel Cap & Long Self - Drilling / Tapping Screw Assemb...

HARTFORD 000-1000

• Manufacturer: Hartford
• Model: 000-1000

Equipped With * Rotary Hopper Location: Screw diameter range: 0.45" - 1/8" (.045"-.125") | Maximum thread length: 9/16" | Maximum shank length: 1" | Speed: 350-1000 ppm | Weight approx.: 1500 lbs

WATERBURY #30

• Manufacturer: Waterbury Farrel
• Model: 30

Equipped With * Coolant pump * Auto lube Maximum diameter: 1/2" | Maximum thread length: 4" | Maximum depth of dies: 4-1/8" | Shank length: 8" | Speed: 60 ppm | Motor: 15 hp | Electrics: 220/3/60 | Weight (approx...

Warren WT-500

• Manufacturer: Warren
• Model: WT-500

Equipped With Screw diameter capacity: #0000 - #6-32 (3.55mm) | Blank length: Up to 1-1/4" (31.75mm) | Speed range: 150 - 1100 ppm | Max thread length: 1-1/8" (28.57mm) | Die requirement: #00 or #000 | Main motor...

1991 Warren WT-20

• Manufacturer: Warren

Equipped With * 24" Vib feeder bowl * Adjustable pitman

1999 INGRAMATIC RP-31 LV

• Manufacturer: Ingramatic
• Model: RP-31

Equipped With * Requires Vibratory Feeder Wire diameter: 5 - 10 mm | Length under-head: 135 mm | Thread length: 10 - 80 mm | Pieces per minute: 120-310 | Die dimensions: 130-150mm | Electrics: 480V/3/60 | Weight,...

1973 PELTZER & EHLERS NKW-K-24

• Manufacturer: Peltzer & Ehlers

Equipped With * Elevator Hopper Largest bolt dia. at 550n/mm?: M 27 ( 1" ) | Largest bolt dia. at 800n/mm?: M 24 ( 7/8" ) | Max. thread length: 125mm ( 5" ) | Shank length: 35 - 200 mm ( 1 3/8 - 8" ) | Output: up...

WATERBURY FARREL #40

• Manufacturer: Waterbury Farrel
• Model: 40

Equipped With Note: Main gear missing one tooth | Maximum diameter: 5/8" | Maximum thread length: 4-1/2" | Die pocket: 6-1/4" x 1" x 4" | Motor: 5 HP | Electrics: 220volts | Output: up to 50 PPM | Weight (approx)...

GPM SERIES

Model GPM-25C Planetary Die Double End Thread Rolling Machine The GPM series models offer single or double ended thread rolling, from diameters of 6-33mm (1/4"-1-1/4") either via the standard magazine feeder, or ...

HARTFORD 000-1000

• Manufacturer: Hartford
• Model: 000-1000

Equipped With * Rotovane Hopper Location: Screw diameter range: 0.45" - 1/8" (.045"-.125") | Maximum thread length: 9/16" | Maximum shank length: 1" | Speed: 330-1000 ppm | Motor: 1.5 hp | Weight approx.: 1500 lbs