Used processing

Pressure Leaf Filter 8 m² (86.1 ft²) Stainless Steel 316 - IPP# 78815

• Manufacturer: Chemieanlagebau Stassfurt

15mm (0,6") thickness horizontal filter plates. 5 cubik feet cake capacity. 650mm diameter (26") x 750mm (30") straight side vertical chamber

Pressure Leaf Filter 5 m² (53.8 ft²) Stainless Steel 316 - IPP# 38873

• Manufacturer: Schenk

pressure leaf filter body Discharge type: centrifugal Tank capacity: 350 litres Serial number: KH839 Int rated 6 bar/full vac @ 200 deg C Unit will take (10) leaves Vessel is 900mm (36"). No leaves w/unit.

Pressure Leaf Filter 0.58 m² (6.2 ft²) Stainless Steel 304 - IPP# 108743

• Manufacturer: Sparkler

Cake capacity: 0.229 cubic feet Has scavenger plate

Pressure Leaf Filter Stainless Steel 316 - IPP# 220997

Plate pack for a pressure filter. 3 plates, no scavenger. With holders and rods.

Pressure Leaf Filter 9.5 m² (102.3 ft²) Stainless Steel Austenitic - IPP# 231027

• Manufacturer: Schenk

Pressure leaf/plate filter Internal volume: 640 liters pressure -1/6 bar manual screw press mechanism, davit assist for top cover

Pressure Leaf Filter 9.5 m² (102.3 ft²) Stainless Steel Austenitic - IPP# 231026

• Manufacturer: Schenk

Pressure leaf/plate filter Internal volume: 640 liters Internal pressure: -1/6 bar approx (20) 800mm diameter stainless steel internal horizontal filter plates manual screw press mechanism, davit assist for top c...

Pressure Leaf Filter 15 m² (161.5 ft²) Stainless Steel 316 - IPP# 703043

• Manufacturer: Chemap Ag (Switzerland)

Test pressure: 11.9 bar centrifugal discharge Total capacity 539 gals (448 Imperial gals) Unit has (20) 39" diameter discs Type A for wet cake discharge.

Pressure Leaf Filter 15 m² (161.9 ft²) Stainless Steel Austenitic - IPP# 217842

• Manufacturer: Schenk/Germany

Vessel #: 5292GW rated inside -1/6bar volume 1.000 liter rated jacket -1/6bar volume 110 liter centrifugal discharge. Cake capacity 0.45 cubic feet

Pressure Leaf Filter 15 m² (161.9 ft²) Stainless Steel Austenitic - IPP# 217843

• Manufacturer: Schenk

vessel # 5293GW rated inside -1/6bar volume 1.000 liter rated jacket -1/6bar volume 110 liter, vertical jacketed centrifugal discharge. Cake capacity 0.45 cubic feet.

Stainless Steel Austenitic Schenk ZHF-SR15 KLKB1 Pressure Leaf Filter - IPP# 215247

• Manufacturer: Schenck

Vessel Number 5056GW Capacity: 955 liters Centrifugal wet cake discharge (32) 805mm diameter elements, (2) 805mm diameter scavenger elements mechanical seal

Stainless Steel Austenitic Schenk ZHF-SR15 KLKB1 Pressure Leaf Filter - IPP# 215246

• Manufacturer: Schenck

Vessel Number: 5055GW Capacity: 955 liters Centrifugal wet cake discharge Elements: (32) 805mm diameter elements, (2) 805mm diameter scavenger elements Seal: Mechanical seal under driven

Pressure Leaf Filter 1 m² (10.8 ft²) Stainless Steel 304 - IPP# 208499

Funda filter Chemap WA number: 6470 3/50/220/380 volt

Stainless Steel 321 Schenk ZHF-S80 Pressure Leaf Filter - IPP# 208456

• Manufacturer: Schenck

vessel volume 5250 liter approx 1.6m diameter x 1.6mm straight side vertical chamber, approx 300mm discharge, mounted on (3) stainless steel legs, associated equipment includes 1 x 3000 liter vertical stainless s...

Filter Press, 473 Sq.Ft. Filtration Area, Polypropylene Plates, Manufactured by Von Roll - IPP# 204427

• Manufacturer: Von Roll

(30) chambers, 5 eye, closed delivery.

Filter Press, 371 Sq.Ft. Filtration Area, Polypropylene Plates. - IPP# 108393

recessed filter plates only, 3 eye, side botom discharge, open/closed delivery, 1.04 cubic meter cake capacity With red & blue buttons (washing plates).