Used processing

Extruder 70 mm (2.8 in) Stainless Steel 316 - IPP# 705279

• Manufacturer: Weber and Seelander

Laboratory Simplex Production rate: 70 Kg/hour maximum (soap). Speed 4.3-25.8 rpm screws rotate in opposite directions, (side by side), double jacket for cooling. (1) electric heater. Extruder driven by 1.1 KW, 3...

Extruder 69.9 mm (2.8 in) Stainless Steel 316 - IPP# 703669

• Manufacturer: Reifenhausser Kg

single screw extruder line General purpose screw and feed hopper. Production rate: 75 Kg/hr maximum polypropylene. Barrel has (8) heaters with (3) electric fans Extruder driven by a 60 HP (46 KW) DC motor. Line i...

Extruder - IPP# 237087

• Manufacturer: Mazzoni

Plodders Rated for 220 bars per minute

Extruder 300 mm (11.8 in) - IPP# 237086

• Manufacturer: Milinda

Plodders single worm two stage. Rated for 2,000 kg./Hr.

Extruder - IPP# 237014

• Manufacturer: Mazzoni

Plodder Rated 2,000 kg/Hr.

Extruder - IPP# 237010

• Manufacturer: Mazzoni

Plodders Line speed 220 bars/minute

Extruder 60 mm (2.4 in) Carbon Steel - IPP# 224195

• Manufacturer: Axon

Axon Polystyrene Single screw extruder system throughput of approximately 5 ton/hour screw driven by 30kw, 3/50/380/660 volt, system includes (1) 15 Kw 321 stainless steel type 20-48T plastic 'Utiliser' dry granu...

Extruder 58 mm (2.3 in) - IPP# 210304

• Manufacturer: Werner & Pfleiderer

twin screw extruder Electric heated barrel with water cooled jacket 84” long (Consisting of 9 blocks each 9.45"), 2.2” diameter discharge Rated for 96 Kpm torque per shaft or 960Nm Outer screw diameter is 57.8 mm...

Extruder 38.1 mm (1.5 in) Aluminum - IPP# 78337

• Manufacturer: Sterling

Sterling Having 3-zone electrically heated water cooled non-vented Xaloy 306 lined barrel. Barrel water cooling system utilizes cast aluminum heaters in a closed loop system including reservoir pump and heat exch...

Extruder 65 mm (2.6 in) Carbon Steel - IPP# 706693

• Manufacturer: APV

twin screw Ko-Kneader system, (1) Baker Perkins 800mm diameter chilled drum roll cooler, series 2000, serial #65712, drum with pre-breaker and Kibbler granulator, granulator driven by 10HP, 1500 rpm motor, pre-br...

Carbon Steel Extruder - IPP# 706425

63mm, single screw extrusion line, approx 60 kg/hr of 800mm wide plastic sheet), line consists of: (1) Bone Brother 63mm x 2m long c/steel single screw extruder, motor with cooling fan, barrel with (5) fans drive...

Extruder - IPP# 706267

• Manufacturer: SMS Buss

with chrome screw and chrome lined barrel. Jacketed barrel for cooling, hinged longitudinally for cleaning and maintenance.

Aluminum Extruder - IPP# 705278

• Manufacturer: Henry Simon

single screw plodder/extruder. Production rate: 500 Kg/hr maximum (soap) Worm speed ? rpm Cast iron barrel and removable nose cone, both with aluminum lining, aluminum worm screw. Barrel with cooling/heating jack...

Extruder 20 mm (0.79 in) Carbon Steel - IPP# 703671

Bone Brothers lab size single screw extruder. Unit has (4) electrically heated zones. Unit is complete with 7" diameter x 5" high stainless steel feed hopper cooling bath and control panel.

Extruder - IPP# 237088

• Manufacturer: Mazzoni

Plodders Rated for 220 bars per minute