Used processing

Stainless Steel Dryer-Twin Shell & Double Cone - IPP# 247058

approx 50 liter stainless steel double cone rotary tumbler, top and bottom cones are off set, cone approx 550mm diameter x 300mm top and bottom cones, mounted on a stainless steel frame,

Carbon Steel Dryer-Holoflite & Screw - IPP# 232603

• Manufacturer: Svedala

Quad screw holo-flight processor Total estimated heating surface area is 1519 sq. ft., Estimated heat transfer surface of material exposed to the trough is 292 Sq. Ft., for the screws is 1227 Sq. Ft. (306.75 sq. ...

Hastelloy - C22 GL Filtrations ltd FD875 Rosenmund and Cogiem Filter Dryer - IPP# 247052

• Manufacturer: Rosenmund

designed by GL Filtration Ltd, manufactured by RMF Engineering Ltd, design pressure internal 6 bar + full vacuum @ -25/165 degrees C, jacket 6 bar + full vacuum @ -25/165 degrees C, all wetted parts are Hastelloy...

Hastelloy - C22 GL Filtrations ltd FD350 Rosenmund and Cogiem Filter Dryer - IPP# 247051

• Manufacturer: Rosenmund

mobile filter/dryer with tilting mechanism, designed by GL Filtration Ltd, manufactured by RMF Engineering Ltd, design pressure internal 6 bar + full vacuum @ -25/160 degrees C, jacket 6 bar + full vacuum @ -25/1...

Rosenmund and Cogiem Filter Dryer Hastelloy - C22 Charles Thompson Ltd CT350-C22 - IPP# 247050

• Manufacturer: Rosenmund

mobile laboratory filter/dryer with tilting mechanism, design pressure internal 6 bar + full vacuum @ -25/160 degrees C, jacket: 6 bar + full vacuum @ -25/160 degrees C, all wetted parts are Hastelloy C22, 50 lit...

Stainless Steel Hosokawa Alpine Dryer-Nauta - IPP# 247055

• Manufacturer: Alpine

approx 10,000 liter stainless steel (highly polished) conical screw nauta mixer system, system consists of (1) 10,000 liter highly polished stainless steel conical nauta mixer, weld dished top, weld coned bottom,...

Stainless Steel 316 Krauss Maffei TTB27/35 Dryer-Wyssmont - IPP# 39544

• Manufacturer: Krauss-Maffei

175 square meter (1,883 square feet), plate dryer. 316 stainless steel lined jacket housing, Heating coil 4 bar (58 psi), 6 bar test pressure. 11KW (15 HP) drive motor with reduction gearbox. Outside diameter is ...

Dryer-Wyssmont 1,926 mm (75.8 in) Stainless Steel 316 - IPP# 704709

• Manufacturer: Wyssmont

20.2 square meter, plate dryer/cooler, Drying surface: 188 sq ft (17.5 sq meter); cooling surface: 29 sq ft (2.7 sq meter). Initial moisture: 40%, residual moisture: 0.5%; drying temp: 100-105 degrees C, drying t...

Dryer-Spray 431.8 mm (17 in) - IPP# 222748

• Manufacturer: Bowen Engineering Inc

Bowen Type CC high speed Spray Dryer Atomizer / Spray machine. Clock wise rotation. Standard design centrifugal atomizer. Self contained unit designed for rugged high temperature operation. With built-in high fre...

Dryer-Spray 2,394 mm (94.3 in) Stainless Steel 304 - IPP# 222441

• Manufacturer: Anhydro

Flat bottom, with a center bottom discharge Chamber diameter 94.25". Inlet air to the chamber is heated by a direct gas fired air heater Gas Air heater is manufactured by Maxon, type Air Flow Burner series NP. Th...

Dryer-Spray 7,000 mm (275.6 in) Stainless Steel 304 - IPP# 220469

• Manufacturer: Niro

nozzle type spray dryer system with integrated fluid bed, directly heated with heat recovering, 45% DS feed, product is a micro Granulate, spray nozzle feed (unavailable)dryer directly heated by gas burner, botto...

Dryer-Spray - IPP# 706209

• Manufacturer: Niro

disc atomiser belt driven

Dryer-Spray - IPP# 706165

• Manufacturer: Niro

disc atomiser belt driven

Dryer-Spray 2,500 mm (98.4 in) Stainless Steel 304 - IPP# 706104

• Manufacturer: Tetre

(1) Tetre 304 stainless steel spray dryer, spray nozzle feed, evaporation 100-160 kg/hr @ 160-195 degrees C, 2.5m diameter x 8.5m straight side x 3m high cone section, 2 x hinged inspection doors, mounted on c/st...

Dryer-Spray - IPP# 706270

• Manufacturer: Niro

belt driven no rotary atomiser disc