Voest Alpine / Weiler DA210 lathe turning machine with Sauter copying device .de
- Manufacturer: Voestalpine
- Model: DA 210
Voest Alpine / Weiler Lathe / turning machine DA 210 with Sauter copying turning device hydraulic Condition and item as seen in the pictures. Sale as viewed under exclusion of any warranty. We kindly request on-s...
Plettenberg, Germany- Trusted Seller

1971 VÖEST DA 300/2000
- Manufacturer: Voestalpine
- Spindle bore: 83 mm
Additional equipment: Complete electrical equipment, three-jaw chuck 400 mm Ø, ditto RÖHM 310 mm Ø; four-jaw chuck 300 mm Ø, faceplate, IDEAL quick-change tool post with 6 inserts, live center, MT 5 reducing slee...
Wiesbaden, Germany - Trusted Seller

VOEST ALPINE WEIPERT WNC 1103
- Manufacturer: Voestalpine
- Spindle bore: 165 mm
Swinging on the bed: 1100 mm | Swing over bed: 1100 mm | Swinging over the saddle: 730 mm | Spindle nose taper: ASA 15 | Spindle hole: 165 mm | Bed height: 440 mm | Swing over saddle: 730 mm | Central height: 55...
Tortona, Italy 
VOEST- ALPINE DA250 #1077-03993
- Manufacturer: Voestalpine
The technical data are manufacturer or operator specifications and therefore not binding for us. We reserve the right to prior sale; only our exclusively our terms and conditions of business and sale. About us mo...
Dorsten, Germany- Trusted Seller

1991 VOEST - ALPINE STEINEL W 570E (Weiler)
- Manufacturer: Voestalpine
- Model: W570
Type of control: cyclecontrolled | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 1 | Turning diameter over bed: 570 mm | Turning dia. over face-slide: 280 mm | Turning length: - mm | Bed...
Leipzig, Germany 
1987 VOEST-ALPINE-WEIPERT WNE 570/2 #1077-02583
- Manufacturer: Voestalpine
- Model: WNE 5702
- Spindle bore: 63 mm
- Power requirement: 22 kW
The technical data are manufacturer or operator specifications and are therefore non-binding for us. We reserve the right to prior sale; our terms and our terms and conditions of business and sale apply exclusive...
Dorsten, Germany
VOEST- ALPINE DA160 #1077-03995
- Manufacturer: Voestalpine
- Model: DA160
Accessories and cabinets can be purchased optionally The technical data are manufacturer or operator specifications and are therefore not binding for us. We reserve the right to prior sale; only our terms and our...
Dorsten, Germany- Trusted Seller

Press brake Voest Alpine BA 550/6-PK – 550 tons, max. length 6050 mm
- Manufacturer: Voestalpine
Bending power: 550 tons Sheet thickness: 22 mm in 3 meters (strenght 37kg/mm2) Bending length: 6050 mm Column overhang: 400 mm Ram height: 2500 mm Distance between columns: 3960 mm Table width: 350 mm Max....
Prague, Czech Republic 
1973 VÖEST DA 1,5 / 210
- Manufacturer: Voestalpine
- Model: DA 210
Distance between centers: 1500 mm, center height: 210 mm, turning diameter over bed: 430 mm, turning diameter over slide: 280 mm, center taper: MK4, spindle bore: 46 mm, bed width: 330 mm, speed range: 21 - 1500 ...
Bobingen, Germany
Voest Parallel Lathe 1000 x 220
- Manufacturer: Voestalpine
VOEST 220 PARALLEL LATHE 1000 X 220 Complete with: - no. 1 self-centering chuck Ø 310 mm. - safety guards Model 220 Height of centers 220 mm. Distance between tips 1,000 mm. Ø on carriage 240 mm. Ø on the bench 4...
Solbiate Olona, Italy- Trusted Seller
Voest Engine Lathe 20x78" 20" Swing 12" Self Centering 3 Chuck Steady Rest
- Manufacturer: Voestalpine
Used, in Good Working Condition, Tested OK. 12" Self centering Chuck 3 Jaw 20" Swing 21-1500 rpm Spindle hole 1-3/4 230/460V 3Hp motor 13" Bed 12" gap section can be removed for more swing If this item ships as F...
$3,400 USDMillersburg, IN - Trusted Seller

VOEST - ALPINE WNC 300 S-560
- Manufacturer: Voestalpine
- Spindle bore: 77 mm
Machine in very good condition, after modernization with NCT in 2023, under power, can be tested anytime.
Brno, Czech Republic 1987 VOEST-ALPINE Austria PBDN 7000/5,2
- Manufacturer: Voestalpine
: Working length: 7000 mm : : : : The machine is in good technical condition, under power.
Sedliště, Czech Republic- Trusted Seller

Lathe Voest DA 160
- Manufacturer: Voestalpine
- Spindle bore: 36 mm
center to center 650mm turning diameter over bed/sledge 330mm/190mm 3-jaw chuck, Multifix tool holder device tail stock
Heilbronn, Germany - Trusted Seller

Voest Alpine DA 250(13.118CH)
- Manufacturer: Voestalpine
- Spindle bore: 50 mm
3-jaw chuck Ø 250 mm 4-jaw chuck Ø 400 mm 4-way toolpost Coolant system
Nijkerk, Netherlands 
Voestalpine DA 210 Lathe
- Manufacturer: Voestalpine
- Model: DA 210
Good condition Voestalpine DA 210 Lathes manufactured in 1973. Located in Germany and other countries. Click request price for more information.
Germany

