1977 Weipert Voest Alpine E 900 × 5,000 center and feed screw lathe
- Manufacturer: Voestalpine
Machine was overhauled in 2001 Name of the control: conventional | Control type: conventional | Delivery time: immediately
Cologne, Germany- Trusted SellerAuction
VÖST-ALPINE - DA 160 - Lead and Pull Spindle Lathe
- Manufacturer: Voestalpine
Gearbox was removed because a gear wheel was replaced Gearbox must be installed by the buyer
Huisheim, GermanyVisit Auction Website Voest Alpine / Weiler DA210 lathe turning machine with Sauter copying device .de
- Manufacturer: Voestalpine
- Model: DA 210
Voest Alpine / Weiler Lathe / turning machine DA 210 with Sauter copying turning device hydraulic Condition and item as seen in the pictures. Sale as viewed under exclusion of any warranty. We kindly request on-s...
Plettenberg, Germany- Trusted Seller
Lathe Voest DA-160
- Manufacturer: Voestalpine
- Spindle bore: 36 mm
turning diameter over bed/sledge 330mm/190mm center to center 650mm 3-jaw chuck, tool holder device tail stock
Heilbronn, Germany - Trusted Seller
1971 VÖEST DA 300/2000
- Manufacturer: Voestalpine
- Spindle bore: 83 mm
Additional equipment: Complete electrical equipment, three-jaw chuck 400 mm Ø, ditto RÖHM 310 mm Ø; four-jaw chuck 300 mm Ø, faceplate, IDEAL quick-change tool post with 6 inserts, live center, MT 5 reducing slee...
Wiesbaden, Germany 
1987 VOEST-ALPINE-WEIPERT WNE 570/2 #1077-02583
- Manufacturer: Voestalpine
- Model: WNE 5702
- Spindle bore: 63 mm
- Power requirement: 22 kW
The technical data are manufacturer or operator specifications and are therefore non-binding for us. We reserve the right to prior sale; our terms and our terms and conditions of business and sale apply exclusive...
Dorsten, Germany
VOEST- ALPINE DA160 #1077-03995
- Manufacturer: Voestalpine
- Model: DA160
Accessories and cabinets can be purchased optionally The technical data are manufacturer or operator specifications and are therefore not binding for us. We reserve the right to prior sale; only our terms and our...
Dorsten, Germany- Trusted Seller
1980 VOEST DA 180
- Manufacturer: Voestalpine
- Model: DA 180
Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Turning diameter over bed: 230mm | Turning diameter over slide: 120mm | Center distance: 800mm | Spindle spe...
Günzburg, Germany 
1973 VÖEST DA 1,5 / 210
- Manufacturer: Voestalpine
- Model: DA 210
Distance between centers: 1500 mm, center height: 210 mm, turning diameter over bed: 430 mm, turning diameter over slide: 280 mm, center taper: MK4, spindle bore: 46 mm, bed width: 330 mm, speed range: 21 - 1500 ...
Bobingen, Germany- Trusted Seller
Lathe Voest DA 160
- Manufacturer: Voestalpine
- Spindle bore: 36 mm
center to center 650mm turning diameter over bed/sledge 330mm/190mm 3-jaw chuck, Multifix tool holder device tail stock
Heilbronn, Germany 
VOEST ALPINE STEINEL (WEILER) E-80/3 cycle-controlled lathe
- Manufacturer: Voestalpine
We are offering a cycle-controlled lathe "VOEST ALPINE" (WEILER) with Siemens/Weiler control, used and in good condition. Additional accessories include: Chip conveyor Tailstock RÖHM three-jaw chuck 315 mm Facepl...
Kassel, Germany
VOEST- ALPINE DA250 #1077-03993
- Manufacturer: Voestalpine
The technical data are manufacturer or operator specifications and therefore not binding for us. We reserve the right to prior sale; only our exclusively our terms and conditions of business and sale. About us mo...
Dorsten, Germany- Trusted Seller
VÖEST-ALPINE DA 160 screw cutting and feed shaft lathes
- Manufacturer: Voestalpine
- Model: DA 160
used center lathe and feed spindle lathe electrical equipment, emergency stop switch, chuck protection with switch-off, lighting, three-jaw chuck, quick-change tool holder MULTIFIX, bed stop, splash guard, chip tray
Wiesbaden, Germany 
1971 VOEST- ALPINE DA 1
- Manufacturer: Voestalpine
- Spindle bore: 46 mm
- Power requirement: 5.5 kW
Lead and feed spindle lathe - 4-jaw chuck 250mm - Multifix Quick-change tool holder - second steel holder on support - Steady rest - Chip tray - Machine light - Documentation
Velen, Germany
Voestalpine DA 210 Lathe
- Manufacturer: Voestalpine
- Model: DA 210
Good condition Voestalpine DA 210 Lathes manufactured in 1973. Located in Germany and other countries. Click request price for more information.
Germany
Tip: Enter manufacturer, model or keyword
