Used Shell And Tube Heat Exchangers in Utrecht, Netherlands

Insulated Tube Heat Exchanger

Insulated tube heat exchanger, Monotube, 13tubes of 6mtr long, surface ±: 4.9m2 total surface, dimensions total unit 6.200 mm x 400 mm x 1.300 mm, 6bar, 150°C max,

TSA Tubular heat exchanger

Tubular heatexchanger. 52 tubes -Length tubes: 130 cm -Diameter tubes Ø 20mm. ''Conn" Steam DN50- Product 2x DN65.

Het Stempel BV Tube heat exchanger

• Manufacturer: Het Stempel BV

Tubular heat exchanger, sanitary (THE) and static mixer to have optiomal heatexchanging. Monotube, 1 compartment, Straight design with swirls, 4 tubes, 1 section, Length: 2 mtr, outer diameter 38 mm, inner di...

Ritter Tubular heat exchanger

• Manufacturer: Ritter

Total Dimensions: L 323cm x H 40cm x L 323cm, Product chamber: operating pressure +6 bar, 60Liter , +180°C, Jacket Chamber, 33L, +90°C, operating pressure +6 Bar.

1989 Wilhelm Deller heat exchanger

• Manufacturer: Wilhelm Deller KG

Hotwater prepartion unit, volume 1175 ltr, 80 °C, pressure 5 bar. Jacket volume 13,5 ltr, 175 °C, pressure 8 bar.

2002 Sacome 1x1-TFMI-370-1-6''/19.05-6000-316L/2205-HARD

• Manufacturer: Sacome

Multitube Tubular Heat Exchanger. 37 tubes in 1 tube. Length 6 meter. Product side: 100 °C - 16,0 bar - 43,25 liter - Margarine - Connection: 3'' ISS. Media side: 100 °C - 10,0 bar - 34,98 ltr - Water - Connectio...

Tetra Pak Spiraflow

• Manufacturer: Tetra Pak
• Model: SPIRAFLOW

Double jacketed and insulated tubular tube heat exchanger. Set of 5 tubes. Multitube, scheme: 2 x 2 in parellel en 1 in serial. Effective length 6mtr. 4 Tubes outer diameter 105 mm and 1 outer diameter 115 mm. 4 ...

Het Stempel BV N.N.

• Manufacturer: Het Stempel BV

Tubular heat exchanger, sanitary (THE). Monotube, 1 compartments, Straight design, 3 tubes, 1 section. Length inner tube: 200 cm, length outer tube 180 cm. Outer diameter 38 mm, inner diameter: 22,5 mm. Connec...

1996 Tetra Pak TTF-2 84c / 38c-6-1 & BSTF-2 54c / 4x16S-6-1

• Manufacturer: Tetra Pak
• Model: TTF2

Tubular heat exchanging unit. Existing out of: 14 tubes (7 sets of 2), multitube, straight design, 1 section, length: 6 mtr, outer diameter 54 mm coagurated (spiral wound), 4 inner tubes of diameter 16 mm, smooth...

2022 Tetra Pak THE C-85 / C-108

• Manufacturer: Tetra Pak

Brand new (never used) tubular heat exchanger, sanitary (THE). Multitube for thermal treatment of most liquid products. Total 15 tubes (corrugated). Configurated in 2 sections: 3 tubes model: CM108, Straight des...

2004 Alfa Laval Spiraflo 1x2 VLM 4x18/63-60-316L/304D

• Manufacturer: Alfa-Laval

Alfa Laval Spiraflo 1x2 VLM 4x18/63-6.0-316L/304D 2 tubular spiraflow pipes. Length pipe: 5,70 mtr. Total: 6,15 mtr. Heat transfer area: 1,29 m2 per pipe

Crepaco 1VT422

• Manufacturer: Crepaco

Scraped surface heatexchanger (SSHE). 1 Vertical Product cylinder, tube: Ø 96 mm, length 1.500 mm, rotor Ø 38 mm with 2 scrapers. Cylinder material: stainless steel. Surface per tube 0,19 m² and volume per tube 1...

1988 Stork Sterideal

• Manufacturer: Stork
• Model: STERIDEAL

Stork Sterideal. UHT line, consists of Stork UHT, Tubular indirect heating, 4 sections of triple tube (tube in tube in tube), Stork holding tube and Skid with infeed tank. new Tubular heatexchanger in 2012 only u...

2015 Tetra Pak Hot water set / MT-108

• Manufacturer: Tetra Pak

Hotwater set with tubular heat exchanger, steam valve (Samson) and piping. Pressure: shell 0-15 bar, tubes 0-40 bar. Temperature: shell 0-180 °C, tubes 0-180 °C. Volume: shell 9,3 liter, tubes 6,1 liter.

N.N.. SS

• Manufacturer: N.N..

Double jacketed pinmixer. Shaft diameter 85 mm, 3 rows with 14 pins (42 pieces total) - cilinder diameter 250 mm with 2 rows with 19 and 20 (total 39) pieces. Cilinder length 195 cm. Connections: 2 x 2" Din and 2...