Used Chisel Ploughs

Chisel plows

Chisel plows

CHISEL PLOUGH SUBSOILER TYPE-PDH

• Manufacturer: Agro-lift

EXPLORER is a chisel plow designed for deep loosening of the subsoil, aerating and crushing the soil, which provides us with better physical and biological properties, and for no-till. Thanks to the use of the ch...

CHISEL PLOUGH SUBSOILER TYPE-PD

• Manufacturer: Agro-lift

RIPPER is a chisel plow designed for deep loosening of the subsoil, aerating and crushing the soil, which provides us with better physical and biological properties, and for no-till farming. Thanks to the use of ...

CHISEL-BLADE CULTIVATOR TYPE-KDB

• Manufacturer: Agro-lift

DYNAMIC PRO is a chisel-plough cultivator for deep no-till, on a rigid frame hitched to the tractor's rear three-point linkage, available in working widths of 2.5m, 3.0m, and 3.6m. The cultivator is equipped with...

2022 Agriweld Assist 6 AR - 12 Tands

• Manufacturer: Agriweld
• Working width: 6 meter
• Number of tines: 2 number

Agriweld Assist 6m with 12 teeth, that can loosen the subsoil down to 30cm. Either as an independent implement or in front of a 6m seed drill or other machine. Mounted with Cat 3 lift arms or pull, where the draf...

New Holland STC300RS

• Manufacturer: New Holland
• Model: STC300RS

Non-stop stone protection Leveling discs Vibro Pack roll; diameter 570 mm Lighting set

Rapisarda hydropneumatic cultivator 9 anchors NEW

Rapisarda hydropneumatic 9-anchor 2-row cultivator mod. Win2/9M - NEW

Subsoiler - GHL

The GHL subsoiler is designed for deep loosening. The machine has a strong construction, which is essential when working at a greater depth than plowing. The use of modern tines is adapted to perform deep looseni...

Subsoiler chisel plough plow ploughless scarifier CENTAUR

CENTAUR ploughless chisel plow - mulcher is designed for deep soil cultivation in order to eliminate the so-called plow sole, reduce harmful soil compaction (through mulching) caused by the use of heavy agricultu...

TH00601 Chisel plow

• Manufacturer: 石狩造機

9 heavy tines

Bomford 10 Tine Super Flow Cultivator

• Manufacturer: Bomford

10 Tine Chisel Plough New Points Fitted Steel Depth Wheels Be Supplied & Fitted DUE IN Plus VAT

1LHS Chisel Plow

Applicable for deep loosening of land and breaking up clods, with small turning radius, Save fuel and labor; with good economic returns, suitable for promotion.

CHISEL PLOUGH WITH ROLLER model PTM-5

• Manufacturer: Özkar
• Horsepower: 45 horsepower
• Working width: 1.2 meter

This chisel can be used for cultivating soil without needing any plough in the farm after harvest. Due to the structure of its legs, the plough crushes the lower layer and it is a suspension machine cultivating l...

CHISEL PLOUGH WITH ROLLER model PTM-11

• Manufacturer: Özkar
• Horsepower: 90 horsepower
• Working width: 2.85 meter

This chisel can be used for cultivating soil without needing any plough in the farm after harvest. Due to the structure of its legs, the plough crushes the lower layer and it is a suspension machine cultivating l...

SUNFLOWER 3040-28 CHISEL PLOW

• Manufacturer: Sunflower
• Model: 3040-28
• Working width: 8.5344 meter
• Frame type: 3-Section

Sunflower 3040-28 Fallow King, 28’, pull type, hyd fold, hyd raise/lower, rear hitch, rear rolling spike tooth harrows, 11L-15 tires, Transportation & Financing Available