- Trusted Seller

Vac-U-Max hopper loader
- Manufacturer: VAC-U-MAX
ITEM 1051: Vac-U-Max hopper loader. Complete with air cylinder actuated dump gate valve. No vacuum blower is included or controls. Some dents. Being offered as is.
$2,000 USDGreensboro, NC - Trusted Seller

VAC-U-MAX VACUUM HOPPER LOADER STAINLESS STEEL
- Manufacturer: VAC-U-MAX
ITEM 1495-1: VAC-U-MAX VACUUM HOPPER LOADER STAINLESS STEEL. PARTS ONLY. SEE ATTACHED PHOTOS. INCLUDES HOPPER COVER, SUCTION BLOWER, PICK UP HOSE; VACUUM WAND, LOOSE PARTS, CONTROLS.
$1,500 USDGreensboro, NC - Trusted Seller

Vac-u-max Receiver 12 Diameter #16696
- Manufacturer: VAC-U-MAX
All stainless steel vac-u-max pneumatic conveyor. Featuring stainless steel receiver 14" diameter x 12" straight side and 14" deep steep cone bottom, 5. 5" diameter discharge with pneumatically operated flap val...
Marlboro, NJ - Trusted Seller

Vac U Max Reciever Venturi Receiver #12234
- Manufacturer: VAC-U-MAX
Vac u max stainless steel pharmaceutical grade pneumatic receiver with compressed air venturi created suction, 22" diameter chamber with 21. 5" straight side, 45 degree cone bottom to 1" center bottom discharge w...
Marlboro, NJ - Trusted Seller

Vac U Max Pneumatic Receiver #11531
- Manufacturer: VAC-U-MAX
Vac-u-max stainless steel sanitary pneumatic receiver, 18" x 20" straight with 24" deep offset cone, internal natural fabric filter, 2" inlet air operated filter agitator/cleaner, with painted steel mounting frame.
Marlboro, NJ - Trusted Seller

Vac U Max Pneumatic Receiver #11532
- Manufacturer: VAC-U-MAX
Vac-u-max pneumatic receiver 17" diameter x 20" straight side with 60 degree cone bottom, total height 32", 2" product inlet, 2" suction inlet, air operated filter agitator mounted on 24 x 24" frame with short le...
Marlboro, NJ - Trusted Seller

Vac U Max Tilt Table Tilt Table #9513
- Manufacturer: VAC-U-MAX
Vac-u-max tilt table, designed for pneumatically unloading drums while vibrating and tilted at approx 30 degree angle, maximum drum diameter is 24", mounted in frame with vibration dampering mounting feet.
Marlboro, NJ - Trusted Seller

Conveyor, Pneumatic, Vac-U-Max, Mdl 05003, S/st, 5 HP #S744398
- Manufacturer: VAC-U-MAX
Vac-U-Max pneumatic vacuum conveyor system, includes stainless steel conical shaped hopper measuring 24" diameter 15" high, leading to tubular 12" diameter X 12" long with a 12" X 18" flip discharge. Incudes Gard...
San Dimas, CA - Trusted Seller

Conveyor, Pneumatic, Vac-U-Max, Mdl VPU-S-3T, 67 CFM #S744520
- Manufacturer: VAC-U-MAX
Vac-U-Max Model VPU-S-3T positive displacement vacuum conveying system with Sutorbilt 3 HP blower. Driven by a 3 HP, 230/460 volts, 3-phase, 60 Hz, 1730 RPM motor. Includes 2" diameter NPT inlet & outlet with 2 s...
San Dimas, CA - Trusted Seller
Vac-U-Max 5 Hp. Sutorbilt Fuller 4MVF Pneumatic Conveying Transfer Vacuum Blower
- Manufacturer: VAC-U-MAX
Tested in good working condition Fuller 4MVF 5 Hp motor 208-230/460 volt 3 phase Contact us for a freight quote or set up your own Skid size is 42" long 36" wide 46" tall 440 lbs. If this item ships as Flat Rate ...
$1,400 USDMillersburg, IN - Trusted Seller
Vac- U- Max Pneumatic Conveyor Parts System NEW! Machinery
- Manufacturer: VAC-U-MAX
“Brand New! Only opened to get photos of the system.” Vac- U- Max Pneumatic Conveyor Parts System NEW! Item comes exactly as pictured. Brand new -- only opened to take photos for this listing. System includes the...

