Used controllers

1980 Green sand mixer EIRICH EBG4, with turbine

• Manufacturer: Eirich

Construction year: 1980, weight: ± 2000 kg Gear motor 19 kW, 380 V Mixer capacity ± 375 l, output ± 7,5 t/h/turbine Gear motor for mix cup turning 4 kW, 380 V, 125 rpm Motor outlet flap 0,75 kW With control relay...

Core sand batch mixer, ± 80 l, BOTON-MERLET

Type: BM 80 EL, serial number: 870-567 Motor BONFIGLIOLI, 3 kW, 1410 rpm, 230/400 V Exit 280 mm, height 190 mm, mixer with 3 arms With senor for door closing With pneumatic valve With electric control cabinet, M...

Sand conveyor STEIN 125 l

Type: SAP-PL, serial number: 148-1082 Year of construction: 1982, Weight: ± 180 kg Input 220 x 220 mm Exit Ø 80mm Pressure max 6 bar With pneumatic valve on the inlet With pressure control equipment With sensor W...

Automated core shooter RÖPER H5

• Manufacturer: SODIMM

Largest core box dimensions: width 460 mm, depth ± 500 mm, height 400 mm with vacuum pump and gas flushing plate With complete housing, core discharge plate, suction pipes, with hydraulic side clamping and hydra...

Furan sand mixer ±4-5t/h OMEGA

• Manufacturer: Omega

Mixing arm movable With 3 daily hoppers, 1m³ each With 1 dosing screw With 2 roller conveyors; length: 2950mm; length: 4100mm With Mitsubishi D700 control unit ±12KW, 380V; 32A With 2 pumps Without steel construc...

1997 Moulding line BELLOI & ROMAGNOLI, 650 mm x 650 mm x 200/200 mm

Type: BRAP/4, construction year: 1997 Moulding line BELLOI & ROMAGNOLI hydraulic squeeze with rotating table With: - roller conveyors for return line (11 meters long) - roll-over (manual drive) - hydraulic statio...

NEW pneumatic sand conveyor FAT, S150 l

Type: S150-100, serial number: 5129 KOM N°: 18659 Weight: 295 kgDimensions: 1000 mm x 800 mm x 145 mmOutlet: Ø 80 mm inlet Ø 150 mmWith cone closure for side filling, 2 openingsControl voltage 230 VWith control...

2007 Sand feeder 31 liters, KLEIN

External dimensions (as double item): 1400 mm x 1000 mm, h. 1600 mm External dimensions (single item): 550 mm x 550 mm, h 1600 mm Sandinlet Ø 145 mm Sandpipe Ø 100 mm With control valves Sends air from below and ...

Core sand mixer ±100l

Core sand mixer Dimensions: Length: 1200mm; Width: 1200mm; Height: 1000mm Useful dimensions: Ø700mm; height: 400mm Gear motor: SEW; Type: KF87DRN132M4 7,5kW; 290/500V; 1460rpm Pneumatic application flap Pneumatic...

Mixing plant for core sand LÜBER 2,5t/h

• Manufacturer: Lüber

3×400V; 50A; 50Hz; 22kW Core sand mixer on rails With 1 sand hopper with weighing system and 2 additive hoppers With 2 dosing valves With platform, railing and stairs With transfer car on KBK rail system ±35m KBK...

Die casting cell (DGA 68) Bühler SC D/42 V-3.0

• Manufacturer: Bühler

consisting of: Dosing/hot holding furnace, made by Striko Westofen, type Westomat W 90 S/MC, year 1996, SN 3937, capacity 375 dm³, heating capacity 18 kcal/kW, furnace temperature max. 1,000° C, control system, m...

1996 Screw mixer WÖHR, 5 t, 1 swivelling arm

Engine: 12 kW, 400 V, 50 Hz, serial number: 345287 Continuous screw mixer WÖHR 3 pumps PTS-acid Beta-set Sand dosing slide With automatic sand dosing With 3 compartiment sand hopper on feet Control board SIEMENS ...

Sand recooling plant BORDEN 5-8 t/h

Year of construction: 1995, weight: 6000 kg Fluid bed cooler BORDEN 5 - 8 t/h With ventilator 9 kW, 220/380 V, 2960 rpm With pneumatic sand transport BORDEN 125 l, type 125, n° 39, pressure 4 bar With dust colle...