Used controller

Horizontal tiltable gravity die casting machine, hydraulic

Dimensions: Length: 2100mm; Width: 800mm ; Height: 1150mm Min opening: ±270mm; max opening: ±460mm With 2 guide rods Turnable With hydraulic power With hydraulic control by 2 levers 380V, 4kW

Pneumatic slag gripper

Dimensions: 1000mm; Width: 860mm; Height: 2400mm On stand With crane eye Pneumatically controlled (connections above) All existing jaws are supplied 2 different models for casting flat jaws and square jaws

Sample grinder, with cup grinding stone HERZOG

• Manufacturer: Herzog

Dimensions: length: 850mm, width: 900mm; height: 1600mm With swiveling clamping device Head is fixed, height adjustable by hand wheel With water pump With emergency stop With control cabinet and operator panel Ma...

Mobile core sand mixer on rails SEGAB 120l

• Manufacturer: Segab

Dimensions: Mixer: Length: 2200mm; Width: 1000mm; Height: 1000mm Internal dimensions mixer: Ø700mm; depth: 450mm With loading station with hopper and sand cooler With SIEMENS S5 control unit Without dosing system...

Sand conveyor 170 l, R.DEBUS

Input Ø 210 mm, output Ø 100 mm, with pressure controller Filling system by cone, max. temperature 200°C, pressure 6 bar, content 170 l With compressed air accelerator on the bottom

2001 Core sand mixing plant LAEMPE SM5; 5,5t/h

• Manufacturer: Laempe / Röperwerk

Dimensions: Length: 2300mm; Width: 1200mm; Height: 2500mm Mixing bucket: Ø380mm; height: 600mm = ±65l With resin and hardener dosing Horizontal mixing paddleHorizontal cleaning paddleMotor power: 7,5KW Without el...

Core Shotter RÖPER - SODIM Automat, 5 l

• Manufacturer: RÖPER -SODIM

Maximum dimensions of core boxes: width 340mm, depth 240mm, height 450mm With gassing plate Table movable to 4 directions With automatic clamping unit All mouvements by hydraulics With control Automat Telemecaniq...

Hotbox coreblower FM20

• Manufacturer: FMI

Dimension: Lenght: 1940mm; Width: 1000mm; Hight: 1750mm With 2 sides, With 2 sides pneumatic clamping strocke 2×200mm max width core box 345mm Control by automatic Toshiba E×40

Ladle heater, gas propane, SARGI

2 kW, 3 x 380 V With ventilator ±400 m³/h, 1 kW, 2900 rpm, 220/380 V Hi is e side ladle heater /pannel 1000x1000 mm. with control board and timer

Die casting cell (DGA 78) Bühler Evolution 120 DS

• Manufacturer: Bühler

consisting of: Dosing/hot holding furnace, made by Striko Westofen, type Westomat 65 SL/ W 900 SL ProDos, year 2003, SN 7726, heating capacity 22 kW, capacity 620 dm³, furnace temperature max. 1,000° C, metal AL,...

Die casting cell (DGA 73) Bühler Evolution 53 D

• Manufacturer: Bühler

consisting of: Dosing/hot holding furnace, made by Stiko Westofen, type W 65 SL DG, year 1997, SN 5405, order no. AB 3171951, capacity 650 kg, furnace chamber volume 540 dm³, temperature max. 1,000° C, metal AL, ...

1973 Shell moulding machine SHALCO U900

External dimensions: length 3900 mm, width 1900 mm, height 2100 mm 700/13 rpm, 1410/27 rpm Without control panel With belt outlet With hydraulic unit (400 V, 15 kW)

Gassing unit BORDEN BETASET 10

External dimensions: 850 mm x 570 mm, h. 1500 mm; feet: 360 mm Three-phase motor 220 V With control box, emergency stop switch and heating, 3500 W; 220/380 V

Die casting cell (DGA 74) Bühler Evolution 53 D

• Manufacturer: Bühler

consisting of: Bühler, type Dataspeed, estimated BS 175,000; mold spraying machine, make Wollin, type PSM 3F, year 2018, control system, type PC2 Unidrive; 6-axis industrial robot, make ABB, type IRB 4600, year ...

Double floor type grinder DÜRRRSCHMIDT-VITEX, 760 mm, 50 m/s

Motor CEM, type: MJPP180M14, serial number: 543154, 18,4 kW, 1430 rpm, 220/380 V Driving by belts, stone max. 760 mm, width 60 m With control cabinet, continious speed 50 m/s