Used Machine Tools

2000 PSI CHIPBLASTER "EV2000RI" HIGH PRESSURE HIGH VOLUME COOLANT SYSTEM

• Manufacturer: ChipBlaster

2000 PSI CHIPBLASTER "EV2000RI" HIGH-PRESURE HIGH-VOLUME COOLANT SYSTEM - 13 GPM - 50 gallon capacity - 10 HP 2000 PSI CHIPBLASTER HI-PRESSURE COOLANT SYSTEM Serial No 1810, Model EV2000RI EQUIPPED WITH: Inlet, O...

7-1/2" X 37" X 10" SET-UP-BLOCK w/(6) T-SLOTS

7-1/2" X 37" X 10" SET-UP-BLOCK EQUIPPED WITH: (6) T-SLOTS GENERAL SPECIFICATIONS Block Width 7-1/2" Block Height 37" Block Depth 10" SEE STOCK NUMBERS 26783 AND 26785 ALSO.

58" X 26" ALPHA-MAGNETS “AC2000SD” MAGNETIC CHUCK w/SD CONTROLLER - 19 SUPPORT BLOCKS

58" X 26" ALPHA-MAGNETS MAGNETIC CHUCK WITH CONTROLLER SERIAL NO 08G03.01, MODEL AC2000SD EQIPPED WITH: SD CONTROLLER (18) SUPPORT BLOCKS (3-ROWS OF 6) SPECIFICATIONS: Magnet, Length 58" Magnet, Width 26"

32.75" x 50" x 38.5" HEAVY-DUTY DRILLED & TAPPED ANGLE PLATE w/ADJUSTABLE EXTENSIONS

32.75" x 50" x 38.5" HEAVY-DUTY DRILLED & SLOTTED ANGLE-PLATE EQUIPPED WITH: (6) Slots On Face - (1) Slot On Top Threaded Mounting Holes Face & Top (4) Adjustable Mounting Arm Extensions (6) Eyebolts GENERAL SPEC...

2-1/2" X 10' (120”) SPEGO "506-20” TURNMATIC 5-SPINDLE HYDRAULIC BAR-FEED w/SELF-CONTAINED HYDRAULICS - (2) HEAVY-DUTY SUPPORT STANDS

• Manufacturer: Spego

2-1/2" SPEGO "TURNAMIC 506" 5-SPINDLE BAR-FEED Serial No 96-06-481, Model 506-20 EQUIPPED WITH: Hand And Auto Controls Forward And Reverse Controls Self Contained Hydraulic System (2) Heavy-Duty Support Stands CA...

Niagara Ring And Circle Shear Z20058A

• Manufacturer: Niagara
• Model: 13RC

3 1/2" - 44" Circle Diameter Range 1 5/8" Diameter Of Cutters 34 1/2" Tail Stock Depth 9.25" Head Throat depth Capacity 16 Gauge mild Steel 1/2HP Motor Foot Pedal Control

Kingsbury 14-Station Custom Designed Assembly Machine

Kingsbury 14-Station Custom Designed Assembly Machine, S/N A-1319 (New 2010), on LH & RH Fulcrum 48-Pallets Mechanical Drain with Air Assist, Koops RH/LH Dowel Insert and Press Station, (2) Denso Wave Pick & Pla...

Dongguan Yiheda Automation Custom Designed Assembly Machine

• Manufacturer: Dongguan

Dongguan Yiheda Automation Custom Designed Assembly Machine, S/N EY380 (New 2022), with Pneumatic Presses, Rotary Tables, Packing Station, Siemens Simatic HMI PLC (Location: Tallahassee, FL) (Location: Post C-3)

HORIZON INTERNATIONAL PERFECT BOOK BINDER MACHINE ON 3" CASTERS

• Manufacturer: Horizon

H.D COMMERCIAL PERFECT BOOK BINDER MACHINE ON 3" CASTERS MAKE- HORIZON INTERNATIONAL MODEL#- BQ-140 SN- 136003 MADE IN JAPAN ELECTRICAL INFORMATION 120V,1PH, 6 AMP, 60HZ REGULAR PLUG APPROXIMATELY DIMENSIONS 41 1...

G-18 MOORE JIG GRINDER Z23057

• Manufacturer: Moore
• Model: G-18

11" X 24" TABLE TABLE TRAVLES 19" LONGITUDINAL 11" CROSS TABLE TO WHEEL COLLET 2-18" SPINDLE COLUM WAYS 10" SPINDLE SPEEDS 40-250 RPM INFINITE SPINDLE FEEDS FROM 4 - 240 SPM TRAVEL 3-5/8" 40,000 RPM MOORE SPINDLE...

Tools

Misc Tools Load out period: December 8- December 18, 2025 (by appointment only) | Estimated dimensions: See photos and description | Estimated weight: See photos and description | Load fee: 0.00

Husqvarna 350

• Manufacturer: Husqvarna
• Model: 350

Husqvarna 350 Chain Saw, 3.2 HP. Saw starts and chain moves as it should. Comes with case. SOLD AS IS

Tooling

Misc Tooling Load out period: December 8- December 18, 2025 (by appointment only) | Estimated dimensions: See photos and description | Estimated weight: See photos and description | Load fee: 0.00

Tooling

Misc Tooling Load out period: December 8- December 18, 2025 (by appointment only) | Estimated dimensions: See photos and description | Estimated weight: See photos and description | Load fee: 0.00