Used Wire Machinery

Trusted Seller
NILSON 751
- Manufacturer: Nilson
- Model: 751
NILSON 751 four slide machine, rebuilt this year, handles 1/16"-3/4" wire with a capacity of 3/4" wide strip. Features 40-400 SPM, 1,000 lbs, dimensions 40"x62". Ideal for wire machinery needs; inquire for detail...
Pomona, CA
Trusted Seller
NILSON 751
- Manufacturer: Nilson
- Model: 751
NILSON 751 Four Slide Machine for wire machinery, rebuilt with dual slides and coining, 1/16" wire dia., 3/4" strip. Features 3" feed length, SPM 40-400, and 2-ton capacity. Compact at 1000 lbs. Must see #6133! N...
Pomona, CA
1999 MITSUBISHI H-500 CNC IGUS 35.1-100 CABLE WIRE CARRIER SYSTEM
- Manufacturer: Fanuc
HELLO AND THANK YOU FOR YOUR INTEREST IN THIS PRODUCT. THIS PART IS USED AND WAS REMOVED FROM A CNC MACHINE. WE CANNOT TEST OUR PARTS, HOWEVER OUR RETURN RATE/RATIO IS EXTREMELY LOW. COMPANY THIS PART CAME FROM A...
$170 USD
Los Angeles, CA
WAGO WIRE TERMINAL BOARD 287-902/000-002 16 POS I/O MOD 21746 3197 OPTO 22
- Manufacturer: Fanuc
THIS PART CAME FROM A CINCINNATI MAXIM EP 400 DAGGER CNC HORIZONTAL MILL WITH SIEMENS ACRAMATIC 2100E CONTROL THAT WE DISMANTLED.
$60 USD
Los Angeles, CA
Trusted Seller
WAFIOS N2
- Manufacturer: Wafios
- Model: N2
Equipped With Wire diameter range: 0.8mm - 1.8mm | Nail length range: 6.5mm - 40mm | Output: 800 PPM | Motor: 1.5kW | Weight, approx: 830 kgs | Dimensions: 140x90x140cm
North America
FANUC WIRE TERMINAL BOX A290-0854-X401 A290-0854-X402 BADGER B-2040 CNC
- Manufacturer: Fanuc
THIS PART WAS REMOVED FROM A 2002 BADGER B-2040 VMC CNC VERTICAL MILL WITH FANUC CONTROL THAT WE DISMANTLED.
$130 USD
Santa Clarita, CA
Trusted Seller
1977 WAFIOS N5
- Manufacturer: Wafios
- Model: N5
Equipped With Wire diameter: .086" - .149" | Nail length: .511" - 3.937" | Output: 430ppm | Weight, approx.: 6500 lbs
North America
Trusted Seller
1975 WAFIOS N5
- Manufacturer: Wafios
- Model: N5
Equipped With Wire diameter: .086" - .149" | Nail length: .511" - 3.937" | Output: 430ppm | Motor: 5.5kW | Weight, approx.: 5,200 lbs
North America
Trusted Seller
1972 National 56 2 DIE 3 BLOW
- Manufacturer: National
- Model: 56
Equipped With * Bushing cutoff * PKo * Relieving die KO * Trimming capability
North America
Trusted Seller
1985 National 56S1 2 DIE 3 BLOW
- Manufacturer: National
- Model: 56
Equipped With * Die relief * Machine setup for Trim
North America
Trusted Seller
1995 SACMA SP-460
- Manufacturer: Sacma
Equipped With Maximum cut-off diameter: 19mm | Maximum cut-off length: 165mm | Maximum length underhead: 120mm | Punch knock-out: 43.3mm | Output: 160 PPM | Heading load: 2000 KN | Motor: 75kW | Weight (approx): ...
North America
Trusted Seller
1991 WAFIOS N90
- Manufacturer: Wafios
- Model: N90
Equipped With Nail diameter range: 2.4 - 3.8mm (.094" - .149") | Nail length range: 45-95mm (1.771" - 3.740") | Output: 820 ppm | Motor: 7.5kW | Weight, approx: 2,800 kgs
North America
WAGO WIRE TERMINAL BOARD 287-902/000-002 16 POS I/O MOD 2097 CINCINNATI 400 CNC
- Manufacturer: Fanuc
THIS PART CAME FROM A CINCINNATI MAXIM EP 400 DAGGER CNC HORIZONTAL MILL WITH SIEMENS ACRAMATIC 2100E CONTROL THAT WE DISMANTLED.
$60 USD
Los Angeles, CA
1999 MITSUBISHI H-500 CNC HORIZONTAL MILL CABLE SERVO WIRE CN3Y LOT OF 3 PIECES
- Manufacturer: Fanuc
HELLO AND THANK YOU FOR YOUR INTEREST IN THIS PRODUCT. THIS PART IS USED AND WAS REMOVED FROM A CNC MACHINE. WE CANNOT TEST OUR PARTS, HOWEVER OUR RETURN RATE/RATIO IS EXTREMELY LOW. COMPANY THIS PART CAME FROM A...
$130 USD
Los Angeles, CA
Trusted Seller
Shuster 2A4V
- Manufacturer: Shuster
- Model: 2A4V
1/8" - 5/16" shuster 2A4V, Used #A3334 Capacity: 1/8" - 5/16" | Wire diameter: .125" - .312" | Speed range (variable): 28 - 200 FPM | Voltage: 480V ~ 3 Phase | Weight: 2,400 Lbs.
$9,500 USD
Los Angeles, CA
Feihong FHG-16 Wire Machinery
- Manufacturer: Feihong
- Model: FHG-16
Good condition Feihong FHG-16 Wire Machinery available between 2022 and 2023 years. Located in China and other countries. Click request price for more information.
China