Used automatic feed in Ontario, Canada

WATERBURY #30 CHAIN FEED

• Manufacturer: Waterbury Farrel

HEAVY FRAME INCLINE AUTOMATIC THREAD ROLLER Maximum Diameter: 1/2" Maximum Thread Length: 4" Maximum Depth of Dies: 4-1/8" Shank Length: 8" Speed: 80 ppm Motor: 15 hp Weight (Approx): 10,700 lbs. Dimensions: 65"W...

UBT SERIES

MAGAZINE FEED U-BOLT BENDING MACHINES Die range: M6 - M24 | Part lengths: 80 -1000mm | Internal ubolt width: 20-250mm | Production speed: up to 50ppm

PRUTTON 150

• Manufacturer: Prutton

DOUBLE END PLANETARY THREAD ROLLING MACHINE * Hydraulic motor with variable speed ** Feed All rod feeder (Sold separately) >Can hold large qty of rods to feed into the rack feed of threader automatically ** Lot Q...

Nutap Type UNT UNT 20

• Manufacturer: Nutap

UNT20 (3/4") High Precision High Speed One Spindle Automatic Nut Tapper * Tapping, Boring & Counter-boring of Special Nuts * Specially Suited to Thread Blind Borings & Extremely Long Parts * PLC Control & Process...

Nutap Type UNT UNT 12

• Manufacturer: Nutap

UNT12 (1/2") High Precision High Speed One Spindle Automatic Nut Tapper * Tapping, Boring & Counter-boring of Special Nuts * Specially Suited to Thread Blind Borings & Extremely Long Parts * PLC Control & Process...

Spoke Machine SPM II / SPM III

• Manufacturer: Spoke Machine

Automatic Spoke Machine * 1 Model: Size Range: Up to 5mm These machines are for the manufacture of cycle spokes, fully automatic from wire coil to finished product. ■ Infinitely variable drive, incl. frequency co...

REED A23

• Manufacturer: Reed
• Model: A23

THREE DIE CYLINDRICAL THREAD ROLLING MACHINE Min. - Max. Threading Diameter (In-feed): 1/4" - 3-3/4" Min. - Max. Thread Diameter (Thru-feed): 1/4" - 1" Maximum Thread Length (In-feed): 2-3/8" Maximum Thread Lengt...

Nutap Type MAS-F MAS 14F

• Manufacturer: Nutap

Model MAS-14F (14mm) High Precision High Speed Two Spindle Automatic Nut Tapper * Tapping Precision Thread of Hex, Square, Flange, Round, 12 Point, Wheel & Special Nuts * Pitch Cam Feed Control * PLC Control & Pr...

Nutap Type MAS-F MAS 33F

• Manufacturer: Nutap

Model MAS-33F (33mm) High Precision High Speed Two Spindle Automatic Nut Tapper * Tapping Precision Thread of Hex, Square, Flange, Round, 12 Point, Wheel & Special Nuts * Pitch Cam Feed Control * PLC Control & Pr...

K SERIES

Model K-25 (25Ton) 2Die Cylindrical Thread Rolling Machine > The K series of hydraulic rolling machines are equipped with two rolling spindles, with one moving head in linear guides which have auto lubrication sy...

K SERIES

Model K-50 (50Ton) 2Die Cylindrical Thread Rolling Machine > The K series of hydraulic rolling machines are equipped with two rolling spindles, with one moving head in linear guides which have auto lubrication sy...

K SERIES

Model K-40 (40Ton) 2Die Cylindrical Thread Rolling Machine > The K series of hydraulic rolling machines are equipped with two rolling spindles, with one moving head in linear guides which have auto lubrication sy...

K SERIES

Model K-15 (15Ton) 2Die Cylindrical Thread Rolling Machine > The K series of hydraulic rolling machines are equipped with two rolling spindles, with one moving head in linear guides which have auto lubrication sy...

Thread Rolling Machines BBW

• Manufacturer: Thread Rolling Machines

Long Parts Thread Rolling Machine * Thread rolling unit with threading dies for: WF # 40 or WF # 50 / TR 6 or TR 7 * Up to 40 full threads per minute * Solid O-frame designed for * axial loads of up to 100 t acti...

Rod Header HRH

• Manufacturer: Rod Header

Hydraulic Rod Header * Six Models: Size Range: 10 - 20mm These machines are suitable for Upsetting, Extruding, Collar Work, Etc. A single machine can perform the following operations fully automatically: ■ Cuttin...