- Trusted Seller
2000 Mac Soft F34
- Manufacturer: Mac Soft
Wire coiler and some tools. Bending head moves freely around the wire and can make 3D bending (3 servos). This information has been prepared to the best of its ability - but is not binding in detail. All prices a...
Gnosjö, Sweden - Trusted Seller
Br. Wikström BW301
- Manufacturer: Br. Wikström
This information has been prepared to the best of its ability - but is not binding in detail. All prices are exclusive of VAT with reservation for price / currency changes.
Gnosjö, Sweden - Trusted Seller
Roundo PASS230
- Manufacturer: Roundo
This information has been prepared to the best of its ability - but is not binding in detail. All prices are exclusive of VAT with reservation for price / currency changes.
Gnosjö, Sweden - Trusted Seller
1966 Kumla PV2
- Manufacturer: Kumla
5 pcs rollers for profile bending This info is prepared to the best of our ability - but is not binding in detail. All prices are exclusive of VAT with reservation for price/currency changes.
Gnosjö, Sweden - Trusted Seller
2006 Trumpf Loadmaster
- Manufacturer: Trumpf
- Model: LOADMASTER
Technical data The above data is produced to the best of our ability but is not binding in detail. Nibbler is your total supplier and through close cooperation with several service companies we provide installati...
Gnosjö, Sweden 
2016 MG G3010B 10x3100
Capacity: 10mm | Pre-bending: 8mm | Working width: 3100mm | Over-rolled: 240mm | Side rollers: 230mm | Engine: 5,5kW | Length: 4370mm | Width: 970mm | Height: 1165mm | Weight: 5920kg
Värnamo, Sweden
Värnamo, Sweden
Carl Wetzel2 Hi BW 3 00/350
- Manufacturer: Carl Wetzel
Roll diameter: 300 mm | Roll length: 350 mm | Bandwidth: 20-254 mm | Tape thickness: 0.25-4 mm | Coil weight: 200 kg | Speed: 0-60 m/min
Värnamo, Sweden
1962 Hungary RM200/1,3/23
Plate thickness: 0.20-1.30 mm | Working width: 170 mm | Number of rollers: 23 pcs. | Roll diameter: 16 mm | Distance between pillars: 200 mm | Speed: 12-32 m/min | Engine: 5,5 kW | Length: 1600 mm | Width: 1200 ...
Värnamo, Sweden
1975 Haeusler HPR 10-hy-asym-spec
- Manufacturer: Haeusler
Top support for diameter: 650-1500mm Angle iron dia.1000mm: 100x100x11 mm | Square iron dia. 500mm: 50x50 mm | Round iron dia. 600mm: 65 mm | Flat iron high edge dia900mm: 90x15 mm
Värnamo, Sweden
1995 Denn RB-40
Diameter: ø400mm | Plate thickness: 1,5mm | Vertical height adjustment: 1000mm | Hastily: 180-757rpm | Engine: 2,2kW | Length: 2300mm | Width: 1000mm | Height: 2300mm | Weight: 1000kg
Värnamo, Sweden
1983 Omera R3/7-3
Diameter: ø700mm | Table: 1300x1100mm | Distance spider-stud doll: 425-825mm | Speed: 8-434rpm | Length: 1300mm | Width: 1360mm | Height: 2300mm | Weight: 2200kg
Värnamo, Sweden
Haeusler HPR 10-H
- Manufacturer: Haeusler
Capacity angle iron ø900mm: 90x90x11 mm | Flat iron: 90x15 mm | Round iron ø600mm: 65 mm | I- & u-beam ø1000mm: NP16 | Bending resistance: 29 cm³ | Engine: 7 kW | Length: 2000 mm | Width: 1470 mm | Height: 1330 ...
Värnamo, Sweden
Värnamo, Sweden
1976 Roundo PS460x3000
- Manufacturer: Roundo
Plate thickness 3x upper roll diameter: 30 mm | Plate thickness 1500mm: 42 mm | Working width: 3000 mm | Over-rolled: 460 mm | Engine: 37 kW | Length: 5850 mm | Width: 2540 mm | Height: 2600 mm | Weight: 30 tons
Värnamo, Sweden
Tip: Enter manufacturer, model or keyword