1990 Komatsu Pritex KMB10-2
used
- Manufacturer: 小松プリテックス
10t Table length 300 Stroke 100 Maximum opening 260 Frame gap 150 320 between side frames If there is any discrepancy between the contents and the actual product, the actual product will take precedence.
Tatebayashi, Japan
1991 Nikotech RFB-8020
used
- Manufacturer: ニコテック
80t, table length 2000, stroke length 100, with safety device (Komori / DSP-J) *The machine was used at a school. In case of any discrepancy between the contents and the original, the original will be given prior...
Tatebayashi, Japan
1998 Aizawa Ironworks APM-11025
used
- Manufacturer: APM
110t Table length 2500 Stroke length 150 Gap depth 300 Auto back gauge If there is any discrepancy between the contents and the actual product, the actual product will take priority.
Tatebayashi, Japan
1989 Toyo Koki HPM-30S
used
- Manufacturer: 東洋工機
30t Stroke length 10 Gap depth 510 If there is any discrepancy between the contents and the actual product, the actual product will take priority.
Tatebayashi, Japan
2006 COPAL CFM-110SR
used
- Manufacturer: COPAL
Straightening thickness 0.1-1.3mm Straightening width 110mm Straightening speed 3-30m/min If there is any difference between the content and the actual product, the actual product will be given priority.
Tatebayashi, Japan
1999 Komatsu PAS18×40
used
- Manufacturer: コマツ
18t Stroke length 100 Table length 400 Gap depth 250 Open height 350 If there is any discrepancy between the contents and the actual product, the actual product will take precedence. If there is any discrepancy b...
Tatebayashi, Japan
2024 bodor c3-12kw
used
- Manufacturer: Bodor
If there is a difference between the content and the actual item, the actual item will be given priority.
Tatebayashi, Japan1981 Wasino HBP-608
used
- Manufacturer: ワシノ
60t Stroke length 150 Daylight 570 With auto back gauge If there is any discrepancy between the contents and the actual item, the actual item will take priority.
Tatebayashi, Japan
1983 Takahashi MN-10
used
- Manufacturer: 高橋
10t Table length 450 Cylinder stroke 50 Adjustment stroke 70 3-phase 200V 1.5Kw If there is any discrepancy between the contents and the actual product, the actual product will take priority.
Tatebayashi, Japan
2004 Komatsu PAS18×40
used
- Manufacturer: コマツ
18t Stroke length 100 Table length 400 Gap depth 250 Open height 280 If there is any discrepancy between the contents and the actual product, the actual product will take priority.
Tatebayashi, Japan
2010 Keiyo Bend BN-1BP
used
- Manufacturer: 京葉ベンド
If there is a difference between the content and the actual item, the actual item will be given priority.
Tatebayashi, Japan
2014 Nikotech NCC-400L
used
- Manufacturer: ニコテック
3 phase 200V 50/60Hz Table size 700 x 700mm Weight 350kg The photos show the table in an uncleaned condition. If there is any discrepancy between the contents and the actual product, the actual product will be gi...
1986 H017254 Five-point cut Showa Seiko
used
- Manufacturer: 昭和精工
Punching 6t×25φ Angle cut 6t×800×80(90 degree) 6t×50×50(45 degree) Rod net cutting: Round 25φ Square 22φ Notching: (Square) 6×50×55 (Triangle) 6×70×35 Shearing 6t×200 *50Hz specification (60Hz change available / ...
Tatebayashi, Japan
1993 Fujimura Ironworks FK515
used
- Manufacturer: 藤村鉄工所
Punching : 50t of applied pressure Diameter 25 x Thickness 16 Angle 90° : 13t x 100 x 100 Fusing : 90° : 9 x 75 x 75
Tatebayashi, Japan1986 NCC NCC-300
used
- Manufacturer: NCC
Three-phase 200 V 50/60 Hz Table dimensions 500 x 500 mm, weight 250 kg Photographs are of an uncleaned condition. If there is any discrepancy between the contents and the actual product, the actual product will ...
$1,354 USDTatebayashi, Japan
Tip: Enter manufacturer, model or keyword
