Used Radial Drills

Trusted Seller
1986 CARLTON 1A #0893724
- used
- Manufacturer: Carlton
- Model: 1A
L-BASE DESIGN Arm length: 5' | Column diameter: 11" | Spindle speeds: 40 TO 1500 RPM | Feeds: (6).006- .025" | Diameter of spindle: 2-1/2" | Spindle taper: #4 | Spindle travel: 12" | Area of base: 36" X 66" X 8-1...
Toledo, OH
Trusted Seller
CARLTON 1A #0893924
- used
- Manufacturer: Carlton
- Model: 1A
SERIAL ............................ SIZE .............................. FEEDS ............................. DIAMETER OF SPINDLE ............... SPINDLE TAPER ..................... POWER ELEVATION ...................
Toledo, OH
Trusted Seller
CLEVELAND CRD-1300
- new
- Manufacturer: Cleveland
Arm length: 4.0 ft | Column dia.: 11.0 in | Power: 5.0 hp | Rpm: 1500.0 rpm
Cleveland, OH
Trusted Seller
CARLTON 3' ARM X 11" COLUMN
- used
- Manufacturer: Carlton
#4 M.T. IN SPINDLE 2-1/2" QUILL DIAMETER 10" QUILL TRAVEL MANUAL CLAMPING ON ARM MANUAL CLAMP ON HEAD POWER ELEVATION BOX TABLE 20" x 24" x 20" WIRED 440 VOLT/3PHASE Can be seen under power on our showroom flo...
Cleveland, OH
Trusted Seller
CARLTON 3' ARM X 9" COLUMN
- used
- Manufacturer: Carlton
#4 M.T. IN SPINDLE 2-1/2" QUILL DIAMETER 10" QUILL TRAVEL MANUAL CLAMPING ON ARM MANUAL CLAMP ON HEAD POWER ELEVATION BOX TABLES 12"x12"x15 3/4" and 12" x 11 1/2" x 13" WIRED 440 VOLT/3PHASE Can be seen und...
Cleveland, OH
Trusted Seller
1970 MAS VR-4
- used
- Manufacturer: MAS - Kovosvit
- Model: VR-4
4'ARM x 12" COLUMN Head Travel 36" Arm Travel (Up & Down) 26" Spindle Taper #5 MT -3" Spindle Speeds (12)45 - 2000 RPM Spindle Travel 12" Spindle Feeds .001 - .063 Spindle HP 5 HP 240 /3 Phase Overall 7'1...
Cleveland, OH
Trusted Seller
SAMSTAR Z3050X16/1
- new
- Manufacturer: SAMSTAR
See attached pdf for detailed BROCHURE and SPECIFICATIONS STANDARD FEATURES: Box Table, Coolant System, Work Light, Easy Hole Location From Operators Station With Power Clamping On The Head, Column & Arm, Siemens...
Cleveland, OH
Trusted Seller
CARLTON 4'ARM X 15"COLUMN
- used
- Manufacturer: Carlton
POWER CLAMPING POWER ELEVATION (APPROXIMATELY 36" VERTICAL TRAVEL) POWER LEFT & RIGHT ON THE HEAD #5 MT IN SPINDLE COOLANT aprox 64" max under spindle Overall dimensions123" Left to Right, 50" Front to Bac...
Cleveland, OH
Trusted Seller
CARLTON 7' ARM X 19" COLUMN
- used
- Manufacturer: Carlton
7' Arm 19" diameter column EX HEIGHT COLUMN Spindle Speeds 7 1/2-750 RPM w/ 1/2 speed 878 RPM motor (15) 1-97 threads per inch 4" Quill Diameter Rapid on head Coolant System #6 MT spindle taper 20" spindle t...
Cleveland, OH
Trusted Seller
CARLTON 3' ARM X 13" COLUMN
- used
- Manufacturer: Carlton
POWER CLAMPING POWER ELEVATION 20" X 20" TILT & SWIVEL BOX TABLE aprox 54" max under spindle Can be seen under power on our showroom floor!!
Cleveland, OH
Trusted Seller
1979 OOYA RE-1225H
- used
- Manufacturer: Ooya
- Model: RE-1225H
4' x 12" OOYA RE-1225H RADIAL DRILL, 1985 Max Spindle RPM, #5 MT Taper, 5 HP, 75" x 30" Table, Power Elevation, Tapping, Coolant, New 1979. Hardened Arm Ways, Tapping Capabilities, Power Elevation, Power Clamping...
Cincinnati, OH
Trusted Seller
1968 OKUMA 7 FT ARM X 22 " COLUMN DRA-J-550 X 2000
- used
- Manufacturer: Okuma
*SPECIFICATIONS WERE TAKEN FROM MANUFACTURERS INFORMATION AND SHOULD BE VERIFIED. MAXIMUM DIAMETER DRILLED 3" Steel - 3 1/2 Cast at 90 RP DISTANCE BETWEEN COLUMN & SPINDLE 78.7" DISTANCE FROM SPINDLE TO BASE 74" ...
Cleveland, OH
Trusted Seller
HMT MACHINE TOOLS RD62
- used
- Manufacturer: HMT MACHINE TOOLS
13" Dia. Column x 52" Arm #5 MT Spindle 15-2500 RPM 3" Spindle Diameter Power Clamp Power Elevation Coolant Can be seen under power on our showroom floor!!
Cleveland, OH
Trusted Seller
2000 7' x 20" POLAMCO RADIAL DRILL
- used
- Manufacturer: Polamco
Features: 20 HP Motor Power Feeds Threading Equipped With: 20 HP Motor Power Feeds Threading
Melville, NY
Trusted Seller
1975 MAS VR5S 5' Radial Arm Drill
- used
- Manufacturer: MAS - Kovosvit
- Model: VR-5
Arm length: 5'8" | Column dia: 18" | Length of arm: 5'8" | Diameter of column: 18" Square | Spindle speeds (12): 28 - 2500 RPM | Quill diameter: 3" | Main motor: 5 HP | Spindle taper: #MT 4 | Overall height: 8'6"
Melville, NY
Kent TPR-920A Radial drill
- used
- Manufacturer: Kent
- Model: TPR-920A
Good condition Kent TPR-920A Radial drills. Located in USA and other countries. Click request price for more information.
USA