Used Presses in Slovenia

Type MULTIPRESS

• Manufacturer: Multipress

The perforated plate is from 8 mm thick steel. It has a holes with distance 50 mm and is very solid construction. The press is vertical version under 15° angle. Working plates as on the left, right and below the ...

Type SLV – GP

The press is designed for cold edge gluing of various elements into a roof beams, parquet flooring and other laminated parts. The lower fence (support) is fixed and is in one part also upper fence is fixed in one...

Type SLV – G

The press is designed for cold edge gluing of various elements into a boards, profiles and other laminated parts with cold drying. Pressing is carried out by hydraulic cylinders. Pressing units are fixed. The ali...

Type SLV – G – T

The press is designed for cold edge gluing of various elements into a roof beams, parquet flooring with cold drying. Pressing is carried out by hydraulic cylinders. The press has a 2 x 5/6 pcs of fixed pressing c...

Type SLV – H

The press is designed for cold edge gluing of various elements into a boards, profiles and other laminated parts with cold drying. Pressing is carried out by hydraulic cylinders. Pressing units can be moved to th...

Type SLV – HB

The press is designed for cold edge gluing of various elements into a boards, profiles and other laminated parts with cold drying. Pressing is carried out by hydraulic cylinders. The aligning units are driven man...

Type ROTOR

Designed for window profiled parts, supporting profiled parts, thicker boards, etc. The glued joints are dried naturally. The feeding of the press is performed manually. The two movable bearings of the machine ca...

Type PRIMO + MM

• Manufacturer: Trimwex d.o.o.

PRIMO: The press is intended for quick and high quality assembling of window frames, door and etc. The standard version of press usually has 3 vertical pressing units and two horizontal pressing units. Besides it...

Type MTM - V - HH

• Manufacturer: Trimwex d.o.o.

Milling unit: manually putting the package and manually turns the package | Type of joint: vertical | Capacity: 7,8 m/min

Horizontal pneumatical press PPS-H

Pneumatic cheese press PPS-H is horizontal pneumatic cheese press that uses compresses air for efficient cheese pressing. It is suitable for pressing 50-280 kg of cheese mass.

Vertical pneumatic press PPS-A

Cheese press PPS-A is a vertical pneumatic cheese press, using compressed air for efficient cheese pressing. Its usually used in larger cheese-making facilities where they use more than one press, for pressing 50...

Pneumatic press PPS-U

Pneumatic cheese press type PPS-U is a basic, universal model of pneumatic cheese press, using compresses air for efficient cheese pressing. It is a great solution for beginner and advanced cheesemakers, who need...

Mechanical press MS-U

Mechanical cheese press type MS-U is a model of cheese press with weights for increasing the pressing force when pressing cheese mass in cheese moulds. Cheese press MS-U is a great opportunity for beginners to ge...