- Trusted Seller
Tecnofer Screw Press
used
Tecnofer Screw Press For recycling post consumer plastic waste Tecnofer Screw Press for processing post-consumer plastic waste
Vissenbjerg, Denmark 
HAARSLEV A/S - Twin Screw Press
used
- Manufacturer: Haarslev
This twin screw press is in excellent condition and is designed for pressing of hole fish and fish by-products. Capacity: up to 10 tons per hour. Motor: 22 kW, 50 Hz, 400 V. Manual in English. The screw conveyor...
Hirtshals, Denmark- Trusted Seller
AC P60 EH2
used
- Manufacturer: AC
- Stroke: 300 mm
Disclaimer Max. pressure: 60 Ton | Stroke: 300 mm | Max. working height: 170-770 mm | Motor power: 2.2 Kw | Working speed: 10 mm/min | Returnspeed: 14.5 mm/min | Moveable cylinder: Ja | Straightenes platten: Ja |...
Næstved, Denmark - Trusted Seller
AC PJ 25H
used
- Manufacturer: AC
- Stroke: 150 mm
Disclaimer Max. pressure: 25 Ton | Stroke: 150 mm | Distance between frames: 640 mm | Max. working height: 105-780 mm | Straightenes platten: Ja | Moveable cylinder: Ja | Pneumatic rapid movement: Ja | Extra tool...
Næstved, Denmark - Trusted Seller
AC 100 Ton not in stock
used
- Manufacturer: AC
- Stroke: 300 mm
Disclaimer Max. pressure: 100 Ton | Manual.: Ja | Length of stroke: 300 mm | Moveable cylinder: Ja | Daylight: 35 - 635 mm mm | Pneumatic rapid movement: Ja | Vægt: 1200 kg | Bredde: 1600 mm | Højde: 2040 mm
Næstved, Denmark - Trusted Seller
STENHOJ 25T TE
used
- Manufacturer: Stenhoj
- Stroke: 300 mm
Årgang: 1988 | Max. pressure: 25 Ton | Table size: 620 x 380 mm | Length of stroke: 300 mm | Daylight: 320 mm | Top workpiece plate: 480 x 300 mm | Pin hole: 125 mm dia | Working radius: 200 mm | Vægt: 1600 kg |...
Næstved, Denmark - Trusted Seller
LFSS HCP 60
used
Årgang: 2024 | Max. pressure: 60 Ton | Vertical: 250 mm | Press speed: 8.5 mm/min | Return speed: 47 mm/sec | Table size: 500 x 750 mm | Top workpiece plate: 430 x 500 mm | Working radius: 450 mm | Motor power: ...
Næstved, Denmark 2015 KRONE CV 150 XC Extreme
used
- Manufacturer: Krone
Further information: nice and ok balers that have been regularly maintained. Variable bale size from 90-150 cm. The baler has a 26-knife cutter and CCI terminal. The belt was changed a few years ago. The machine ...
1991 New Holland D 2000 New Holland D2000
used
- Manufacturer: New Holland
Additional information: nice and well-maintained 90-120 presses for little money. Many spare parts are included.
2001 New Holland BB940 new holland bb 940
used
- Manufacturer: New Holland
Additional information neat and well-maintained presses that are ready for the season
Portal press RHTC
new
- Manufacturer: RHTC - Profi Press
80 Tons Motor power 4 HP Piston stroke 450 mm Maximum pressure: 315 bar | Approach speed: 10 mm/sec. | Work speed: 4 mm/sec. | Return speed: 17 mm/sec. | Horizontal light: 1.050 mm | Maximum vertical light: 600 m...
Hydraulic Press - Type: 63 ton
used
- Stroke: 750mm
Max. pressure: 63 ton Table size: 700 x 610mm Stroke length: 750mm H x D x W: 3200 x 2000 x 1450mm Weight: 6800kg
Faaborg, Denmark
Tip: Enter manufacturer, model or keyword
