Used Machine Tools in Upper Austria, Austria

1969 WEINGARTEN PS 125 Screw impact wringer
- Manufacturer: Weingarten
- Model: PS 125
Freight basis: in stock | Spindle diameter: 125 mm | Pressure: 110 t | Hub: 100 - 300 mm | Table length: 500 mm | Table width: 450 mm | Strokes: 46 Hub/min | Stem surface: 450 x 450 mm | Stand width: 550 mm | Di...
Niederkappel, Austria
1980 LVD EMF-OH 300 SP deep drawing press - hydraulics
- Manufacturer: LVD - Strippit
4 hydraulically pivoting cutting impact dampers Control: conventional | Freight basis: in stock | Pressure: 300 t | Stand width: 1600 mm | Stroke of the tappet: 500 mm | Working speed: 17-61 mm/sec | Return speed...
Niederkappel, Austria
HEILBRONN RMR 7/320/60 Belt straightener
- Manufacturer: Heilbronn
Belt straightener with feed Freight basis: in stock | Bandwidth: 320 mm | Sheet thickness: / mm | Number of rollers: 7 | Roll diameter: 60
Niederkappel, Austria
1980 RHODES S2-350-60-36 eccentric press - double column
- Manufacturer: Rhodes
- Model: S2-350-60-36
We have two such presses in stock. Two shears from the same production line are also still available.
Niederkappel, Austria
HANAU 8896-57 Hydraulic wheel press
- Manufacturer: Heraeus - Hanau - Vötsch
- Model: 8896-57
Rail Wheelset Horizontal Press For pressing wagon wheels onto the axle
Niederkappel, Austria
ARNOLD 3PP100 straightening press - double column
- Manufacturer: ARNOLD
ARNOLD rail press, with conveyor rollers Freight basis: in stock | Pressure: 100 t | Stand width: / mm | Hub: / mm
Niederkappel, Austria
1962 JESSERNIGG & URBAN PE 50 single-column press - Hydraulic
- Manufacturer: Jessernigg
C - Press - Hydraulic Control: conventional | Freight basis: in stock | Pressure: 50 t | Discharge: 300 mm | Hub: 520 mm | Table size: 600 x 550 mm | Installation height: 570 mm | Voltage: 500 V | Total power req...
Niederkappel, Austria
JANTSCH toggle press - single-column
- Manufacturer: JANTSCH
Foot pendulum press Freight basis: in stock | Pressure: / t | Discharge: / mm | Hub: / mm
Niederkappel, Austria
Trusted Seller
2012 Lattice Girder CUT-System, GTA-PROGRESS PREQAST-M24543
- Manufacturer: Progress
Lattice Girder Processing GTA Lattice girder CUT-system for storing, measuring, cutting, welding, and distributing. Interested in innovative projects?
Thalheim bei Wels, Austria
1989 NATIONAL 56 S1
- Manufacturer: National
- Model: 56
Dies: 2 | Max. ø (mm): 12 | Max. shaft length (mm): 65 | Max. pieces per minute: 150
Upper Austria, Austria
2000 EWM-MENN KM 15
- Manufacturer: EWMenn
- Model: KM 15
Max. ø when rounding and drilling (mm): 8 | Max. shaft length (mm): 200 | Max. pieces per minute: 250
Upper Austria, Austria
1987 SASPI GV3/20
- Manufacturer: SASPI
Max. ø (mm): 12 | Max. thread height (mm): 75 | Max. shaft length (mm): 100 | Max. pieces per minute: 220
Upper Austria, Austria
1976 HILGELAND FN6-60 A2
- Manufacturer: Hilgeland
Max. ø (mm): 6 | Max. thread height (mm): 60 | Max. shaft length (mm): 140 | Max. pieces per minute: 450
Upper Austria, Austria
1981 NATIONAL M12 (124)
- Manufacturer: National
- Model: M12
Dies: 4 | Max. across flats (mm): 19 | Max. die kick out (mm): 19 | Max. pieces per minute: 250
Upper Austria, Austria
1985 NATIONAL M10 (5/16") -S2
- Manufacturer: National
- Model: M10
Dies: 5 | Max. across flats (mm): 14 | Max. die kick out (mm): 19 | Max. pieces per minute: 200
Upper Austria, Austria