Used Machine Tools in Saxony, Germany

ORTLINGHAUS mechanical clutch

mechanical clutch, multi-plate clutch ORTLINGHAUS CLUTCHES Serial no. 20 20/236232/10 4x threaded hole: M10 x 1.5, depth: 15 mm New !

DR. MATZAT Clamping and support unit

• Manufacturer: DR. MATZAT S & CO. Ltd.

Clamping and support unit, quick release, tensioner, 2 pieces DR. MATZAT S & CO. Ltd. 50 x 40 mm Fastening screw: M12 x 1.75, length: 30 mm New !

WMW mechanical clutch

• Manufacturer: WMW

mechanical clutch, multi-plate clutch WMW, DRESDEN CLUTCH PLANT 40 - TGL 20767 used, tested !

WMW mechanical clutch

• Manufacturer: WMW

mechanical clutch, multi-plate clutch WMW, DRESDEN CLUTCH FACTORY 10 - TGL 20767 gear wheel: diameter: Ø 137 mm, tooth width: 14 mm, tooth spacing: 8 mm, 51 teeth used, tested !

PAGUS Bezel

• Manufacturer: Pagus

Bezel, lunette, setting stick, fixed PAGUS counter pressure plate missing used, tested !

PAGUS Bezel

• Manufacturer: Pagus

Bezel, lunette, setting stick, fixed PAGUS Dovetail guide: 200 / 190 mm, height: 16.5 mm, width: 50 mm counter pressure plate for dovetail guide missing used, tested !

WMW clamping drive

• Manufacturer: WMW
• Hours: 1,055 hour

Pneumatic clamping drive, clamping force generator WMW, FIXTURE CONSTRUCTION HOHENSTEIN 320 x 106 TGL 30-7608 New !

ESCO Flexible tooth coupling

• Manufacturer: Esco

Flexible tooth coupling, coupling ESCO escogear C80 Diameter clutch housing: Ø 215 / 168 mm, length: 110 mm New !

WMW bearing pedestal

• Manufacturer: WMW

Bearing block, counter bearing for milling spindle WMW Ø 70 mm x 150 mm Distance spindle center - upper edge of dovetail: 150 mm dovetail guide: 133 / 95 mm, height: 25 mm, width: 64 mm used, tested !

WMW bearing pedestal

• Manufacturer: WMW

Bearing block, counter bearing for milling spindle WMW Ø 70 mm x 150 mm Distance spindle center - upper edge of dovetail: 150 mm dovetail guide: 200 / 155 mm, height: 30 mm, width: 135 mm used, tested !

HEIDENHAIN Digital Position Display

Digital position display, 2 axes HEIDENHAIN VRZ 735 228 418 01 100 - 240 V 56 - 60 Hz approx. 1.6 m power cable ( firmly clamped ) used, tested !

WMW bearing pedestal

• Manufacturer: WMW

Bearing block, counter bearing for milling spindle WMW Ø 56 mm x 63 mm Distance spindle center - upper edge of dovetail: 63 mm dovetail guide: 192 / 166 mm, height: 17 mm, width: 75 mm used, tested !

WMW bearing pedestal

• Manufacturer: WMW

Bearing block, counter bearing for milling spindle WMW Ø 48 mm x 94 mm Distance spindle center - upper edge of dovetail: 94 mm dovetail guide: 193 / 178 mm, height: 16.5 mm, width: 84 mm used, tested !

BIKON clamping set

• Manufacturer: BIKON

Clamping set, flange with clamping cone, as a set BIKON, RING SPRING 15 clamping sets for shaft diameters: 1 x Ø 20 mm, 1 x Ø 22 mm, 3 x Ø 25 mm, 1 x Ø 28 mm, 2 x Ø 30 mm, 1 x Ø 35 mm, 5 x Ø 40 mm, 1 x Ø 45 mm Se...

SANDVIK ER collet chuck

• Manufacturer: Sandvik

ER collet chuck, collet chuck SANDVIK COROMANT 392.41014-100 32 100A New !