Used Machine Tools in Saitama, Japan

Makita JR002GRDX
- Manufacturer: Makita
Ironworker cutting speed Increased by approx. 50 *Compared to our conventional machine Steel pipe (Φ34×3mm thickness) Battery BL4025 x 2, Charger DC40RA, Case, Reciprocating saw blade (BIM48/steelworker)
$529 USD
Kumagaya, Japan
Matsui Ironworks RC-301-Φ120
- Manufacturer: Matsui
-Blade moves left and right - Cutter moves left and right, allowing for precise grooving without shifting the workpiece. The cutter moves from side to side, allowing precise grooving without shifting the material...
Kumagaya, Japan
Matsui Ironworks RC-301
- Manufacturer: Matsui
-Blade moves left and right - Cutter moves left and right, allowing for precise grooving without shifting the workpiece. The cutter moves from side to side, allowing precise grooving without shifting the material...
Kumagaya, Japan
Matsui Ironworks RC-301-Φ140
- Manufacturer: Matsui
-Blade moves left and right - Cutter moves left and right, allowing for precise grooving without shifting the workpiece. The cutter moves from side to side, allowing precise grooving without shifting the material...
Kumagaya, Japan
Matsui Ironworks VC-350
- Manufacturer: Matsui
Double insulated, with electric brake Power supply: Single phase 100V | Current: 11A | Power consumption: 1,050W | Mass: 6kg | Chain speed: 7.3 m/s (440 m/min) | Effective length of cut: VC-100:95mmVC-300:300mmVC...
Kumagaya, Japan
Matsui Ironworks VC-300
- Manufacturer: Matsui
Double insulated, with electric brake Power supply: Single phase 100V | Current: 11A | Power consumption: 1,050W | Mass: 6kg | Chain speed: 7.3 m/s (440 m/min) | Effective length of cut: VC-100:95mmVC-300:300mmVC...
Kumagaya, Japan
Matsui Ironworks VC-100
- Manufacturer: Matsui
Double insulated, with electric brake Power supply: Single phase 100V | Current: 11A | Power consumption: 1,050W | Mass: 6kg | Chain speed: 7.3 m/s (440 m/min) | Effective length of cut: VC-100:95mmVC-300:300mmVC...
Kumagaya, Japan
Matsui Ironworks ZC-300
- Manufacturer: Matsui
-Can be selected between 4' (12mm) and 5' (15mm) depending on the blade specifications. -The same thickness as the material to be installed is used as a ruler. The finish will be seamless. -Can be used for new co...
Kumagaya, Japan
Matsui Ironworks KM-101 with 5-minute blade
- Manufacturer: Matsui
-Dramatic reduction in processing time. With a 4m length of material, it takes only about 3 minutes to make 18 indentations. -Good finishing accuracy. The newly developed special chip cutter The finish is incompa...
Kumagaya, Japan
Matsui Ironworks KM-101 with 3-minute blade
- Manufacturer: Matsui
-Dramatic reduction in processing time. With a 4m length of material, it takes only about 3 minutes to make 18 indentations. -Good finishing accuracy. The newly developed special chip cutter The finish is incompa...
Kumagaya, Japan
Makita LC1200
- Manufacturer: Makita
Tip Saw for Mild Steel Angle Channels Lined steel pipe Gas pipes Round bars, etc.!
$509 USD
Kumagaya, Japan
Matsui Ironworks HP-603
- Manufacturer: Matsui
-Blade height can be adjusted by either the blade gauge type for easy adjustment or the set screw type for more precise adjustment. Set screw type for more precise adjustment is available.
Kumagaya, Japan
Matsui Ironworks VCR-3
- Manufacturer: Matsui
Power supply: Single phase 100V | Current: 15 A | Power consumption: 1,430W | Mass: 10.5kg | Oil tank capacity: 65ml: 5 m | Chain speed: 10.2 m/s (440 m/min) | Effective length of cut: 360mm
Kumagaya, Japan
1988 Daiden B-300P
- Manufacturer: voluminous electric current
In working condition Product name: Welding machine | Main specifications: In working conditions.
Tokigawa, Japan
1987 Amada CS-220
- Manufacturer: Amada
- Model: CS-220
Capacity: 10t Stroke length: 25 Corner notch: 220 x 220 Edge notch: 50 (width) x 100 (depth) Instructions, specifications, drawings None
Tokigawa, Japan