Used Machine Tools in Portugal

TOS VARNSDORF Whn9A
- Manufacturer: TOS Varnsdorf
- Model: WHN 9
Boring machine TOS VARNSDORF Shaft diameter: 90mm | Cross trip: 1250 mm | Vertical travel: 1120 mm | Spindle: 700 mm | Shaft diameter: 90mm | Spindle taper: Morse 5 | Table size: 1800 x 1120 mm | Spindle speed: 1...
$20,332 USD
Marinha Grande, Portugal
Ingramatic RP1
- Manufacturer: Ingramatic
- Model: RP-1
Ingramatic RP1 Max Diameter: M6 Max thread length: 42mm Max length of rods: 75mm Year: 80's
Agueda, Portugal
OMEGA RR4
- Manufacturer: Omega
Capacity (mm): Ø2-4
Agueda, Portugal
EWM GW62
- Manufacturer: EWM
Capacity (mm): M8x58
Agueda, Portugal
Ingramatic RP1
- Manufacturer: Ingramatic
- Model: RP-1
Ingramatic RP1 Max Diameter: M6 Max thread length: 42mm Max length of rods: 75mm Year: 80's
Agueda, Portugal
MAS VR4
- Manufacturer: MAS - Kovosvit
- Model: VR-4
MAS VR4 Radial Drill
$4,938 USD
Marinha Grande, Portugal
1993 SANDRETTO EUROMAP 1960-350 Serie hp 350 S7 350
- Manufacturer: Sandretto
- Stroke length: 575 millimeter
SANDRETTO EUROMAP 1960-350 Serie hp 350 S7 350 14.5 Tn Note: There may be differences between the data presented and the actual values. You must confirm the characteristics by visiting the equipment.
Marinha Grande, Portugal
TUS 160 hydraulic press
- Manufacturer: TUS
TUS 160 hydraulic press Pressing force: 160 tons | Table area: 1,550 x 1,800 mm | Opening height: up to 1,800 mm | Lower table load capacity: up to 20 tons | Turntable load capacity: up to 6 tons | Machine weight...
Marinha Grande, Portugal
1988 SANDRETTO EUROMAP 1960-350 Serie hp 350 S7 350
- Manufacturer: Sandretto
- Stroke length: 575 millimeter
SANDRETTO EUROMAP 1960-350 Series hp 350 S7 350 14.5 Tn year 1988 Note: There may be differences between the data presented and the actual values. You must confirm the characteristics by visiting the equipment.
Marinha Grande, Portugal
1985 SANDRETTO EUROMAP 515-135 Serie 135
- Manufacturer: Sandretto
- Stroke length: 575 millimeter
SANDRETTO EUROMAP 515-135 Series 135 5.7Tn year 1985 Note: There may be differences between the data presented and the actual values. You must confirm the characteristics by visiting the equipment.
Marinha Grande, Portugal
2018 MILLUTENSIL BV.28ERG.071
- Manufacturer: Millutensil
MILLUTENSIL BV.28ERG.071 hydraulic press. This hydraulic press is an advanced version designed for small and medium-sized molds. Equipped with a hydraulic system controlled by proportional electronic servo valves...
Marinha Grande, Portugal
1995 SANDRETTO EUROMAP 430-120 Serie Otto 120
- Manufacturer: Sandretto
- Stroke length: 870 millimeter
SANDRETTO EUROMAP 430-120 Series Otto 120 4.5Tn year 1995 Note: There may be differences between the data presented and the actual values. You must confirm the characteristics by visiting the equipment.
Marinha Grande, Portugal
2020 MILLUTENSIL BV30 ER
- Manufacturer: Millutensil
MILLUTENSIL BV.30ER hydraulic press. Useful surface length: 1500 mm | Useful surface width: 1000 mm | T-slots on surfaces: 18 (DIN650) mm | Lower work surface height: 750 mm | Table size: 1,200x1,000mm | Minimum ...
Marinha Grande, Portugal
1984 TCS Provastampi 100 ton
- Manufacturer: TCS
100 ton TCS hydraulic press. Force: 100 SHADES | Top table: 1760MM | Lower table: 1200MM | Height: 1600MM - FREE | Press weight: 30.000 kg | Strength: 100 SHADES | Table size: 1,200x1,000mm | Maximum clamping for...
Marinha Grande, Portugal
2018 MILLUTENSIL BV.28ERG
- Manufacturer: Millutensil
MILLUTENSIL BV.28ERG hydraulic press. Advanced version for small and medium-sized molds. The BV 28 E is the advanced version with a hydraulic system controlled by electronic proportional servo valves and parall...
Marinha Grande, Portugal
Quaser MV154 Machining Center
- Manufacturer: Quaser
- Model: MV154
Good condition Quaser MV154 Machining Centers available between 2005 and 2015 years. Located in Italy and other countries. Click request price for more information.
Italy