Used Machine Tools in Pennsylvania, USA

NOBLES 29760.2

• Manufacturer: Nobles

Power: 2 horsepower | Electrics: 460V 3 PH

NEW HOLLAND 22

• Manufacturer: New Holland

Basket size: 12" x 12" | Operating speed: 825 RPM | Load capacity: 75 lbs | Electrics: 220V | Approx. floor size: 24" x 37" x 36-1/2" H | Approx. weight: 400 lbs

BARRETT 1100 WD

• Manufacturer: Barrett
• Model: 1100

Pan diameter: 30" | Pan depth: 14" | Pan capacity: 4.5 cu ft | Power: 10 horsepower | Maximum load weight: 425 lbs | Running speed: 900 r.p.m. | Dimensions: 49" Base x 45" (Lid Closed) 81-1/2" (Lid Open) | Weigh...

WATSON-PEACHTREE 6" Belt Wrap Capstan

• Manufacturer: Watson

SHUSTER 32SF1

• Manufacturer: Shuster
• Model: 32SF1

Wire range: .062" - .187" | Speed range: 25 to 200 FPM | Equipped with: With Allen Bradley Power Flex 4 Drives, Dual Arbor, & on Casters

NILSON 1B

• Manufacturer: Nilson
• Model: 1B

Wire diameter range: .020" - .050" | Maximum oscillation: 4" | Number of blocks: 10 | Motor: 1 HP | Equipped with: Single Oscillating Arbor

WIREMATE 42" Table

• Manufacturer: WIREMATE

Approx. weight: 1,000 lbs | Approx. floor size: 5' Square

1976 FASTENER ENGINEERS DH-2521-70-28 R

• Manufacturer: Fastener Engineers

Capstan diameter: 28" | Speed range: 11 - 170 FPM | Electrics: 230V/60Hz/3 Phase | Equipped with: Reverse FrameMechanical Scale Cracker

1997 WAFIOS FTU-0

• Manufacturer: Wafios
• Model: FTU-0

Wire diameter range: 0.1mm - 0.5mm | Maximum travel of coiling spindle: 35mm (Spring Length Approx.) | Maximum diameter of coiling mandrel: Approx. 5mm (Spring Inside Diameter) | Electrics: 220V / 60 Hz / 3 Phas...

WAFIOS FTU-0

• Manufacturer: Wafios
• Model: FTU-0

Wire diameter range: 0.1 - 0.5mm | Maximum travel of coiling spindle: 35mm (Spring Length Approx.) | Maximum diameter of coiling mandrel: Approx. 5mm (Spring Inside Diameter) | Electrics: 3 Phase 220V 60Hz | Equ...

WAFIOS FTU-0

• Manufacturer: Wafios
• Model: FTU-0

Wire diameter range: 0.1 - 0.5mm | Maximum travel of coiling spindle: 35mm (Spring Length Approx.) | Maximum diameter of coiling mandrel: Approx. 5mm (Spring Inside Diameter) | Electrics: 3 Phase 220V 60Hz | Equ...

1973 ASAHI OKUMA ORH-120

• Manufacturer: Okuma
• Model: ORH-120

Maximum cutoff diameter: 9/16" (14mm) | Maximum cutoff length: 4" (100mm) | Maximum kickout length 1st die: 5-1/8" (130mm) | Pko stroke: 15mm | 1st die diameter: 2-1/2" | 2nd die diameter: 3-1/2" | Maximum produ...

NATIONAL MACHINERY 1/8 Single Die

• Manufacturer: NATIONAL MACHINERY

Maximum cutoff diameter: 1/8" | Maximum shank length: 1/2" | Cutoff length: 3/16" - 5/8" (Min/Max) | Pierced hole: 5mm | Electrics: 220V | Approx. weight: 4,000 lbs | Equipped with: Bushing Cut OffIAC

1981 NAKASHIMADA MH-05

• Manufacturer: Nakashimada
• Model: MH-05

Maximum cutoff diameter: 7/64" (2.5mm) | Maximum cutoff length: 3/4" (18mm) | Maximum shank length: 1/2" (12mm) | Maximum production: 250 PPM | Approx. weight: 3,000 lbs | Equipped with: PKOBushing Cutoff

1981 NAKASHIMADA MH-05

• Manufacturer: Nakashimada
• Model: MH-05

Maximum cutoff diameter: 7/64" (2.5mm) | Maximum cutoff length: 3/4" (18mm) | Maximum shank length: 1/2" (12mm) | Maximum production: 250 PPM | Approx. weight: 3,000 lbs | Equipped with: With PKO & Bushing Cutoff