Used Machine Tools in Maryland, USA

American Torch Tip 220717 Deflectors – Goes W/220718

Weight: 0.19 lbs | Dimensions: 3 × 1 × 1 in

PROFAB Manual Slip Rollers

• Manufacturer: PROFAB

Product Description Looking for a manual slip roller? Look no further than the PROFAB Manual Slip Rollers! Model 3622 – 36″ long, 22 ga., 2″ roll diameter The manual slip roller features manual adjust on forming ...

PROFAB FDD-16 Compact Pinspotter

Product Description Introducing the PROFAB FDD-16 Compact Pinspotter. Compact design for easy handling. With a powerful 115-volt, single-phase input voltage, the FDD-16 can be used in virtually any location; in t...

Duro Dyne Power Liner Sizer

• Manufacturer: Duro Dyne

Product Description Used Duro Dyne Power Linder Sizer Insulation Cutter High Production – 40 Linear Feet Per Minute

Roper Whitney 8 foot 16-gauge floor model hand break

• Manufacturer: Roper Whitney

Product Description Weight: 1640 lbs | Bending length: 97 in/ 2464 mm | Capacity mild steel, 1-inch flange, with bending bar and angle in place: 16 ga/1.60 mm | Capacity mild steel, 1-inch flange, with bending an...

Master Chemical Microsol 485 #6466

• Manufacturer: TRIM

TRIM MICROSOL 485 LONG-LIFE SEMISYNTHETIC COOLANT INVENTORY # 6466 DESCRIPTION TRIM MICROSOL 485 IS A LONG LIFE SEMISYNTHETIC, MICROEMULSION COOLANT DESIGNED FOR FERROUS METALWORKING OPERATIONS AND OPTIMIZED FOR ...

Lockformer Vulcan Plus Plasma Table 5’x10’

• Manufacturer: Lockformer

Product Description Specifications: Lockformer vulcan plus: Featuring the “Flex-Ability” technology to side or end load. | Software/computer system: Vulcan 6XP HVAC Dell PC with 19″ Monitor & Printer | Machine co...

Thermal Dynamics 9-8243 Shield Caps

• Manufacturer: Thermal Dynamics

Product Description Genuine Thermal Dynamics 9-8243 shield caps. Drag Shield Cup 70-100 Amp for SL60 or SL100 plasma 1 torch.

Thermal Dynamics 9-8208 40 Amp Nozzles

• Manufacturer: Thermal Dynamics

Product Description Genuine Thermal Dynamics 9-8208 nozzles. Thermal Dynamics standoff tip is ideal for automated cutting is used for SL60/SL100 torches with a current rating 40 A.

Thermal Dynamics 9-8206 30 Amp Nozzles

• Manufacturer: Thermal Dynamics

Product Description Thermal Dynamics genuine 9-8206 nozzles. 30 amp current. Cutting tip is for the Thermal Dynamics SL60 & SL100 plasma torches.

Stud-Lock

• Manufacturer: PROFAB

Product Description Labor-saving tie rod construction hardware Stud-lock is the result of combining our field tested condu-lock and a threaded stud. This component will allow one person to reinforce duct without ...

S16-P2420-8 #1 Mt 2″ Bent Tip

Product Description S16-P2420-8 #1 Mt 2″ Bent Tip.

Innerlogic 770098 Retaining Caps

Product Description Original Kaliburn. Weight: 1 lbs | Dimensions: 5 × 4 × 4 in

Formula 1 Degalvanizer

• Manufacturer: Formula 1

Product Description For All Roll Formers And Other Duct Working Equipment Now Available In Bulk 5 Gallon Pails Up to 35% Savings over Aerosol Cans One source for automatic or manual sprayers Easy Pour Spout In St...

EZ-End Reinforced Angled Duct Adapter

• Manufacturer: PROFAB

Product Description EZ-End is a duct-stiffening adapter designed for transitional duct. It conforms to any angle from 0 – 90 degrees. EZ-End works with both 1/2″ and 3/4″ EMT. Attaches to Condu-Lock. There’s no n...