Used Machine Tools in Indiana, USA

Wysong MTH250-120 Hydraulic Press Brake 10' x 3/8" 250 Ton 20Hp

• Manufacturer: Wysong
• Model: MTH250
• Capacity: 250,000 kilogram
• Stroke length: 254 millimeter

In good used condition, tested. Product Videos If this item ships as Flat Rate Freight please see details in Shipping tab

13/16" Steel Top Machine Base Welding Table Work Bench 82-3/4x101-5/8" 28"H

Steel table in good used condition. Machined steel top on steel base. This is a 13/16" thick top. Comes out to 20mm compare to 3/4" 82-3/4" x 101-5/8" Frame sits on Leveling feet. Has lots of cutout and holes for...

Okuma OEY-OKM-2.2KW CNC Lathe Hydraulic Power Unit 30L/Min Toyooki Pump 40L Tank

• Manufacturer: Okuma

In Good Used Condition. Was removed from an LU-25 Okuma Lathe. Okuma OEY-L-STD-2.2KW 40 Liter tank capacity. 16"x 17"x 11" If this item ships as Flat Rate Freight please see details in Shipping tab

15 Ton 20' Hydraulic Press Brake Punch C-Frame 11-Hole Steel Hole Punch

• Manufacturer: UnitTool

In Good Used Condition. Removed From a Working Environment. Press Brake Set Up For 11-Hole Punch. UnitTool 4M 2-1/4 Punches. 7/16" Holes. 15 Ton Capacity. 20' Bed Length. 21' 6" Throat Opening. 5" Bed Width. 6...

3/4" Aluminum Top Welding Work Bench Machine Fab Table with Shelf 96"W 48"D 34"H

Used condition. Top has some 2" square holes. Welded aluminum frame with bolt-on aluminum top and shelf. -Top is not 100% flat. If this item ships as Flat Rate Freight please see details in Shipping tab

Federal No 55 Mechanical OBI Punch Press 60 Ton Air Brake Clutch 4" Stroke 10Hp

• Manufacturer: Federal
• Stroke length: 4 millimeter

Ram Bolt Distance (Center to Center) (Inches): 22" 4 Bolt pattern Throat Opening (Frame to Center of Ram) (Inches): 15" Used, in Good Working Condition, Tested OK. Air Brake Clutch This can be started and stopped...

Edwards DD Metal Shear 2.5mm x 2030 mm 12 ga x 80" Mechanical Power 3Ph 220/440V

• Manufacturer: Edwards
• Model: DD

Used, in Good Working Condition. Tested. 4kw 5.5hp motor. Wired for 460V. This unit runs. May need service as unit cycles all the time. Relay or controls?? We just have a mechanically sound and working machine. T...

1-1/8" Steel Top Machine Base Welding Table Work Bench 50"W 30"D 34-3/4"H

Used, in Good Working Condition. Removed From a Working Environment. The top is only 42x30" the overall size is 50" wide. Top has some holes in it. This was used as a machine base. Frame is made out of 2" square ...

Federal Mechanical OBI Punch Press 32 Ton Air Brake Clutch 1-1/2" Stroke 7.5Hp

• Manufacturer: Federal
• Model: 32

Ram Bolt Distance (Center to Center) (Inches): 12x9" 4 bolt type Throat Opening (Frame to Center of Ram) (Inches): 8" Used, in Good Working Condition, Tested OK. Air Brake Clutch This can be started and stopped i...

Federal Mechanical OBI Punch Press 43 Ton Air Brake Clutch 1-1/2" Stroke 7.5Hp

• Manufacturer: Federal

Ram Bolt Distance (Center to Center) (Inches): 9-1/2" Throat Opening (Frame to Center of Ram) (Inches): 8" Used, in Good Working Condition, Tested OK. Air Brake Clutch This can be started and stopped in any posit...

L&J No 22 Mechanical OBI Punch Press 22 Ton 3" Stroke 2Hp 3Ph Air Clutch Brake

• Manufacturer: L&J
• Stroke length: 3 millimeter

Ram Bolt Distance (Center to Center) (Inches): 7-1/2 Throat Opening (Frame to Center of Ram) (Inches): 7 Used, in Good Working Condition, Tested OK. Tested in our shop. Wired for 230V 3 phase This has an Allen Br...

13/16" Steel Top Machine Base Welding Table Work Bench 88-1/2x94-1/2"26-1/2"H

Steel table in good used condition.. Frame sits on Leveling feet. Has 20-3/4x27" cutout on top. If this item ships as Flat Rate Freight please see details in Shipping tab

Amada HFE 1000-35 Press Brake 112 Ton x 10' 122" Hydraulic CNC 200mm Stroke 460V

• Manufacturer: Amada

Used and removed from a working environment. We were unable to make the unit operate and therefore could not test it at our location. This unit is setup with safety curtains and programing. Can be inspected at o...

Verson 300-B2-96 300-Ton Punch Press Pneumatic Clutch Brake 24"OD Spring Set

• Manufacturer: Verson
• Model: 300-B2-96

Refurbished condition. Has an order sheet from Lozier 2016. Clutch Brake for Verson 300 ton punch press 300-B2-96. 12-Bolt 24" Flange OD. 54-tooth spline shaft. 17" Disc OD. If this item ships as Flat Rate Freig...