- Trusted Seller
1990 Betenbender 6-50
- Manufacturer: Betenbender
- Model: 6-50
Converted Hydraulic Duel voltage 220/440 Equipped with: Fully hydraulic Automec 150 BG (moves x axis in and out with control and Ram y1y2) Control Foot Switch and Two Hand Control Pendant Micro Guard Light Curtain
$14,900 USDChicago, IL - Trusted Seller
Bliss 10 Ton
- Manufacturer: Bliss
Tonnage Capacity: 10 Bed Size: 17-1/2″ x 10″ Shut Height: 5″ Electrical: 230V / 3PH
$2,900 USDChicago, IL - Trusted Seller
2000 CLN 2010
- Manufacturer: CLN
220V, 60Hz, 1 Phase. Machine type: Fabrication | Machine location: Ohio | Stock #: 138116 | Sheet width: 1.9″ – 11.9″ | Sheet height: 0.8mm – 1.6mm | Letter height: Unlimited | Material strength: 0.8mm – 1.6mm | ...
$7,900 USDChicago, IL - Trusted Seller
1950 Cincinnati 1810
- Manufacturer: Cincinnati
- Model: 1810
Machine type: Shears | Capacity: 1/4″ | Machine location: Oklahoma | Stock #: 198534 | Length: 10′ | Depth of gap: 18″ | Stroke per minute: 60 | Auto lube: Yes | Hold downs: 11 | Main motor: 7-1/2 Hp
$12,900 USDChicago, IL - Trusted Seller
1985 Amada RG D9 E
- Manufacturer: Amada
Machine type: Hydraulic Press Brakes | Capacity: 80 Ton | Machine location: Washington | Stock #: 791881 | Bending length: 8′ (96″) | Control: Manual hydraulic controls | Ram stroke: Approx. 8″ | Open height: Ap...
$19,900 USDChicago, IL - Trusted Seller
1968 Pacific 200-10
- Manufacturer: Pacific
Tonnage: 200 Overall Length: 10′ Approx. Stroke Length: 14″ stroke Open Height: 15″ Throat Depth: 8″ C-frame to Ram C-line Voltage: 480V, 3 Phase
$19,900 USDChicago, IL - Trusted Seller
2010 Virtek LPS-1EA
- Manufacturer: Virtek
Machine type: Fabrication | Machine location: Illinois | Stock #: 540643 | Scanning accuracy (2d): 0.002″ | Scanning accuracy height measurements: 0.010″ | Max part thickness: 7.87″ / 12.0″ | System scan table s...
$17,900 USDChicago, IL - Trusted Seller
1980 HTC 155
- Manufacturer: HTC
Machine type: Hydraulic Press Brakes | Capacity: 155 Ton x 12‘ | Machine location: North Dakota | Stock #: 547443 | Tonnage: 155 tons | Overall length: 144 inches (12 feet) | Distance between housings: 125 inche...
$11,900 USDChicago, IL - Trusted Seller
2022 AP Lazer 2816
- Manufacturer: AP Lazer
Equipped With: Carriage / Cart 8″ Blower with 6″ reducers Black Slider Rotary Air Assist Compressor (110 V) Safety Glasses (CO₂ 10,600 nm) LightBurn Software Complete Lens Kit (30.8 mm, 50.8 mm, 76.2 mm, 101.6 mm...
$17,900 USDChicago, IL - Trusted Seller
$12,900 USDChicago, IL - Trusted Seller
Rofin Easy Jewel #51440
- Manufacturer: Rofin
Equipment No. 50011685 Year Built – 2007 SPECIFICATIONS: Working Chamber: EQUIPPED WITH: (2) Rofin Ring Marking Modules Integrated Camera System Labtop *Preliminary specifications, pending confirmation
Lincolnshire, IL - Trusted Seller
Rofin Easy Jewel #51439
- Manufacturer: Rofin
Equipment No. 50011891 Year Built – 2007 SPECIFICATIONS: Working Chamber: EQUIPPED WITH: Rofin Ring Marking Module Integrated Camera System Labtop *Preliminary specifications, pending confirmation
Lincolnshire, IL - Trusted Seller
Chatsworth Products 66353-703
- Manufacturer: Chatsworth Products
CHATSWORTH PRODUCTS 66353-703 2-POST OPEN RACK (100 AVAIL.) CHATSWORTH PRODUCTS 66353-703 2-Post Open Racks, Approximately (100) Available
East Peoria, IL - Trusted Seller
APC AP8865
- Manufacturer: APC
APC AP8865 METERED VERTICAL RACK PDU (16 AVAILABLE) APC AP8865 Metered Vertical Rack PDU, (16) Available
East Peoria, IL - Trusted Seller
2017 Velodyne HDL-64E S3
- Manufacturer: Velodyne
VELODYNE LIDAR HDL-64E S3 3D LIDAR SENSOR Velodyne Lidar, HDL-64e S3, 64 Channel, 360°.2017, (10) Available (10) Units Available For Individual Purchase EQUIPPED WITH: Selectable Frame Rate Rugged Design Mounting...
East Peoria, IL 
Daewoo DMV 500 Machining Center
- Manufacturer: Daewoo
- Model: DMV 500
Good condition Daewoo DMV 500 Machining Centers manufactured in 2000. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
