Used Machine Tools in Hungary

Festo pneumatic push-in quick connector, T connector, 12-12-8mm/ct2066b
- used
- Manufacturer: Festo
Pneumatic T connector for 2x12mm, 1x8mm tube. Condition: used Manufacturer: Festo Manufacturer number: 130615 Material: PBT Tube diameter: 8mm, 12mm Operating pressure (max.): 6 bar Min. operating pressure: -0.95...
Tata, Hungary
Festo VL/O-3-1/4 pneumatic solenoid valve/ct2059f
- used
- Manufacturer: Festo
3/2 way valve function G 1/4 connection Aluminum housing 800 l/min maximum flow Operating pressure range -0.95 - 10 bar IP65 protection against dust and dirt Compact 30.5 mm design Advantages: Long life and durab...
Tata, Hungary
Festo CPV14-GE-MP-6 compact valve island, valve block/ct2059b
- used
- Manufacturer: Festo
The Festo CPV14-GE-MP-6 is a compact valve terminal designed for various industrial automation applications. Technical data Valve function: 2x3/2-way valve, normally closed Number of valves: 6 valves Maximum flow...
Tata, Hungary
Festo guided work cylinder, pneumatic press, belt lifter/ct1506
- used
- Manufacturer: Festo
Festo ADN-32-15-A-P-A with air cylinder Guided cylinder, linear unit, pneumatic press module With 1 linear guide, for press, press, etc. Lifting plate: 200x50 mm Piston diameter: 32 mm Stroke length: 15 mm Pressu...
Tata, Hungary
196939 Festo solenoid valve CPE14-M1BH-5J-1/8 /ct1507
- used
- Manufacturer: Festo
Manufacturer: FESTO Type: CPE14-M1BH-5J-1/8 Weight: 0.118 kg Dimensions (L x W x H): 132 x 44 x 16 mm Normal nominal flow rate: 800 l/min Operating pressure: 2 ... 8 bar Coil characteristic 24 V DC: 1.28 W Medium...
Tata, Hungary
Festo MEH-3-24VDC, pneumatic solenoid valve, 8 bar, 24VDC/ax344a
- used
- Manufacturer: Festo
Festo MEH-3-24VDC, pneumatic solenoid valve, 8 bar, 24VDC, Manufacturer: Festo Type: MEH3-24V-DC Data: Can be fitted to a pneumatic valve block. MEH-3-M5 solenoid valve, MEH-3-24VDC coil, 2-8 bar Electrical conne...
Tata, Hungary
Reinhardt Maschinenbau GmbH Ras 28.60 #6613
- used
- Manufacturer: RAS
- Weight: 9350 kg
Sheet Metal Processing Unit, Decoiler, Straightener, Guillotine Shear, Reinhardt Maschinenbau GmbH Ras 228.60 Used Machine Features: Decoiler Measuring Unit Sheet Straightener Guillotine Shear Electrical Data:
Tatabánya, Hungary
Dunkes DN 2
- used
- Manufacturer: Dunkes
- Model: DN 2
- Weight: 130 kg
The dimensions of the machine are approximately 0.40 x 0.50 x 1.00 m.
$2,087 USD
Tatabánya, Hungary
Festo MS6-FRM-1/2 coupling module, carrier block/ct1520
- used
- Manufacturer: Festo
Festo MS-series coupling module for compressed air distribution. Manufacturer: Festo Type: MS6-FRM-1/2 Pneumatic pipe connector with 4 connections G1/2 Tool for mounting additional modules A built-in non-return v...
Tata, Hungary
KNOLL VRF 250 #6746
- used
- Manufacturer: Knoll
- Capacity: 1450 l
- Weight: 1140 kg
Emulsion Treatment System with Chip Conveyor,vacuum rotation filter KNOLL VRF 250, Used Machine Overall dimensions:
Tatabánya, Hungary
Mayfran RBF-SYSTEM S78480 #6600
- used
- Manufacturer: Mayfran
Mayfran Emulsion Treatment System, Emulsion Processor, Chip Management – Used Machine Processing and Filtration Capacity: 700 l/min
Tatabánya, Hungary
Festo CPV14-GE-MP-8 compact high-performance valve terminal/ct2059a
- used
- Manufacturer: Festo
The Festo CPV14-GE-MP-8 is a compact, high-performance valve terminal that can be used in a wide range of industrial automation applications. Technical data Valve function: 2x3/2-way valve, closed, monostable Val...
Tata, Hungary
Durma VN 2006 – Heel lifter heel lifter (3218)
- used
- Manufacturer: Durma - Durmazlar
Hydraulic corner beveler for sale. Technical data can be seen on the data plate!
$5,854 USD
Get financing
Est. $115/mo
Tatabánya, Hungary
Suhner Monor Master BEM -20
- used
- Manufacturer: Suhner
Hydro-pneumatic feed unit – full extension: 125 mm | Maximum workable diameter: 20 mm; 600N/mm
$2,852 USD
Tatabánya, Hungary
Plate cutter 1250x3mm board scissors plate cutter (3048)
- used
Max cutting width: 1250mm | Max sheet thickness: 3mm
$2,087 USD
Tatabánya, Hungary
Mazak VTC 20B Machining Center
- used
- Manufacturer: Mazak
- Model: VTC 20B
- Control: Mazatrol M Plus available
Good condition Mazak VTC 20B Machining Centers available between 1992 and 1999 years. Located in Slovakia and other countries. Click request price for more information.
Slovakia