Used Machine Tools in Gunma, Japan

1992 LUXO LE-300
- Manufacturer: Laxou
Three-phase 200 V Table size: 500 x 500 mm with automatic table feed If there is any discrepancy between the contents and the actual product, the actual product will take precedence.
Tatebayashi, Japan
Laxou U-300
- Manufacturer: Laxou
Three-phase 200V 0.75KW Table size 500mm x 400mm without working light If there is any discrepancy between the contents and the actual product, the actual product will be given priority.
$1,287 USD
Tatebayashi, Japan
1991 Nikotech RFB-8020
- Manufacturer: Nicotech
80t, table length 2000, stroke length 100, with safety device (Komori / DSP-J) *The machine was used at a school. In case of any discrepancy between the contents and the original, the original will be given prior...
Tatebayashi, Japan
Yasuhiro Seisakusho YSK-350
- Manufacturer: Yasuhiro Seisakusho
Table size 600 x 600 If there is any discrepancy between the contents and the actual product, the actual product will be given priority.
$1,608 USD
Tatebayashi, Japan
2010 Amada HDS-1703NT
- Manufacturer: Amada
- Model: HDS-1703NT
170t Stroke length 250 Table length 3220 Gap depth 450 Open height 520 Machine mass 20t If there is a discrepancy between the contents and the actual product, the actual product will take precedence.
Tatebayashi, Japan
2005 TOYO SEIKI TVT-301S
- Manufacturer: Toyo
FANUC21i-MB BT30 12 ATCs Table size 650 x 400 Spindle speed 8000 rpm Stroke X500 Y400 Z300 If there is any discrepancy between the contents and the actual product, the actual product will take priority.
Tatebayashi, Japan
2005 Mori Seiki NL2000/500
- Manufacturer: Mori Seiki
- Model: NL-2000/500
MSX-850 (MELDAS) 8-inch 3-jaw chuck, 12-sided turret, with center, spindle speed 5000 rpm. If there is a discrepancy between the contents and the actual product, the actual product will take precedence.
Tatebayashi, Japan
2006 Miyano BNC-34C5
- Manufacturer: Miyano
- Model: BNC34C
FANUC0i-TC 5-inch 3-jaw chuck (Kitagawa/B-205), 8-corner turret, right-hand feed chip conveyor, with automatic fire extinguishing device If there is any discrepancy between the content and the actual product, the...
Tatebayashi, Japan
2000 Mori Seiki SL-25E
- Manufacturer: Mori Seiki
- Model: SL-25
MSC-500(FANUC) 10mm 3-jaw chuck 10 square turret with spindle through-hole diameter 71 center If there is any discrepancy between the content and the actual product, the actual product will take priority.
Tatebayashi, Japan
2013 Mori Seiki CTX-310 V1
- Manufacturer: Mori Seiki
M730BM (MELDAS) 8-inch 3-jaw chuck, 12-sided turret, center distance 500, with center, with right-hand chip contact, with dialogue. If there is a discrepancy between the contents and the actual product, the actua...
Tatebayashi, Japan
1996 Nakamura-Tome Precision Industry TMC-30C
- Manufacturer: Nakamura
FANUC Four-Caret Chuck (Koyo/HSR-225) 12 Square Turret If there is any discrepancy between the contents and the actual product, the actual product will take priority.
Tatebayashi, Japan
1983 Komatsu SHG-3C-220
- Manufacturer: Komatsu
Maximum board thickness 3.2mm Corner notch 220 x 220 In case of any discrepancy between the content and the actual product, the actual product will be given priority.
Tatebayashi, Japan
Washino LEOG-80A
- Manufacturer: Amada - Wasino
- Model: LEOG-80A
12-inch 3-jaw scroll chuck, spindle through hole diameter 54, center distance 1000, spindle speed 23-1800 rpm, swing above bed 490, swing above carriage 260, with cut-off, with 2-axis digital scale.
Tatebayashi, Japan
1991 Dainichi Metal Industry DM102 x 300
- Manufacturer: Dainichi
810Φ4 jaw chuck, face plate Φ1000, center distance 3000, with digital display, steady rest. If there is a discrepancy between the contents and the actual product, the actual product will take priority.
Tatebayashi, Japan
1993 Mori Seiki MS-650
- Manufacturer: Mori Seiki
- Model: MS-650
8-inch 3-jaw scroll chuck (Kitagawa/JN08RA6) 650 center spacing, 52 spindle through-holes, spindle speed 32-1800 rpm, with 2-axis digital scale.
Tatebayashi, Japan